Xero PS5 Wireless Controller

उत्पादन माहिती
तपशील
- उत्पादनाचे नाव: झीरो वायरलेस कंट्रोलर
- सुसंगतता: PS5
- कनेक्टिव्हिटी: वायरलेस, ब्लूटूथ
- चार्जिंग पोर्ट: यूएसबी-सी
- अतिरिक्त वैशिष्ट्ये: Built-in microphone, speaker, touchpad
उत्पादन वापर सूचना
तुमचा कंट्रोलर कनेक्ट करत आहे
- Make sure the controller is fully charged.
- तुमचा PS5 कन्सोल चालू करा.
- Connect your controller to the console via the USB-C cable provided.
- Press the button on the controller until the light on the touchpad illuminates.
- आता तुम्ही USB केबल डिस्कनेक्ट करू शकता.
- टीप: After the initial connection, you can simply press the button to connect wirelessly via Bluetooth in the future.
ब्लूटूथ दृश्यमानता
- To put the controller in Bluetooth pairing mode, hold down the SHARE button and press the button. This makes the controller visible in the PlayStation menu Settings under Accessories-General-Bluetooth Accessories.
चार्जिंग कंट्रोलर
- Use the included USB cable to connect the Xero PS5 Controller to your PS5 console for charging. The lights on the controller will indicate charging status.
उठणे आणि झोपणे
- If the controller is disconnected for more than 30 seconds, it enters sleep mode. Press the button to wake it up. If there’s no user input for more than 10 minutes, it will also go into sleep mode. Press the button to reconnect.
नियुक्त खेळाडू
- The Xero Wireless Controller indicates the player number assigned through the colored bar on the touchpad.
बॉक्समध्ये काय आहे
- 1 x Wireless Xero controller
- 1 x USB-C चार्जिंग केबल

तुमचा कंट्रोलर कनेक्ट करत आहे
- टीप – The console supports one primary controller per User, so to use your XERO Controller with an existing User you you must log out any controller already connected as that user.
- If, when adding a controller, you assign it to a new User, then the above steps are not required.
- तुमचा झीरो वायरलेस कंट्रोलर तुमच्या PS5 कन्सोलशी जोडणे खूप जलद आणि सोपे आहे.
- जेव्हा तुम्ही पहिल्यांदा झीरो कंट्रोलर तुमच्या कन्सोलशी जोडता तेव्हा तुम्हाला ते USB-C केबलद्वारे करावे लागेल, त्यानंतर ते केबलचा वापर न करता वायरलेसपणे कार्य करेल.
- कंट्रोलर पूर्णपणे चार्ज झाला आहे याची खात्री करा (चार्जिंग कंट्रोलर विभाग पहा)
- तुमचा कन्सोल चालू करा.
- तुमचा कंट्रोलर कन्सोलला दिलेल्या USB-C केबलद्वारे (पुरवलेल्या) कनेक्ट करा.
- नंतर दाबा
टच पॅडवरील प्रकाश उजळेपर्यंत कंट्रोलरवरील बटण दाबा. - आता तुम्ही USB केबल डिस्कनेक्ट करू शकता.

- Once you have connected the Xero Controller via these steps, you can just press the
भविष्यात ब्लूटूथद्वारे कन्सोलशी कनेक्ट करण्यासाठी बटण.
ब्लूटूथ दृश्यमानता
- तुम्ही "शेअर" बटण दाबून आणि दाबून कंट्रोलरला ब्लूटूथ पेअरिंग मोडमध्ये ठेवू शकता
बटण - This enables you to make the controller visible when in the PlayStation menu “Settings” – “Accessories”-” General”- ”Bluetooth Accessories.
- झीरो वायरलेस कंट्रोलर तुमच्या ब्लूटूथ अॅक्सेसरीजमध्ये "ड्युअलसेन्स वायरलेस कंट्रोलर" म्हणून दिसेल.

चार्जिंग कंट्रोलर
- Use the included USB Cable to connect your Xero PS5 Controller to your PS5 console. You can do this with the console turned on or in standby mode.
- When you connect the controller to the console via the USB cable, the Lights will briefly flash ORANGE then go off while charging resumes.

- कन्सोल रेस्ट मोडमध्ये असताना कंट्रोलर चार्ज करण्यासाठी, तुम्हाला हे कन्सोलवर सक्षम करावे लागेल.
- The controller can also be charged from other USB power sources such as PC’s and plug-in chargers. Always use a USB cable that complies with the USB standard.
- The light on the controller may not always be visible when charging from other sources.
नियंत्रक
- A: दिशानिर्देश बटणे
- B: शेअर करा
- C: टचपॅड
- D: लाइट बार
- E: पर्याय
- F: कृती बटणे
- H: उजवी स्टिक/R3 बटण
- I: होम बटण/पीएस बटण
- J: अंगभूत मायक्रोफोन
- K: 3.5 मिमी हेडसेट जॅक
- L: निःशब्द बटण
- M: वक्ता
- G: डावी स्टिक/L3 बटण
- N: R1 बटण
- O: L1 बटण
- P: R2 बटण
- Q: L2 बटण
- R: यूएसबी-सी पोर्ट
- S: फंक्शन आर (एफआर)
- T: फंक्शन L (FL)
- U: रीसेट बटण

उठणे आणि झोपणे
- If the controller is disconnected from the console for more than 30 seconds, it will enter sleep mode. Pressing the
button, it will wake up and automatically connect to the PS5. - जेव्हा कंट्रोलर PS5 शी जोडलेला असतो परंतु वापरकर्त्याकडून कोणत्याही बटणावर, टचपॅडवर किंवा जॉयस्टिकवर 10 मिनिटांपेक्षा जास्त काळ कोणताही इनपुट मिळत नाही, तेव्हा कंट्रोलर आपोआप स्लीप मोडमध्ये जाईल.
- To wake the controller up from sleep mode, simply press the
button, and the Xero Controller will reconnect to the PS5.
नियुक्त खेळाडू
झीरो वायरलेस कंट्रोलर टच पॅडच्या पुढच्या काठावर असलेल्या रंगीत बारद्वारे कंट्रोलरला कोणता प्लेअर नंबर नियुक्त केला आहे हे स्वयंचलितपणे सूचित करेल.
हेडफोन वापरणे
- हेडफोन्स कंट्रोलरच्या ३.५ मिमी जॅकमध्ये प्लग करा.
- सेटिंग्ज वर जा
- ध्वनी निवडा
- ऑडिओ आउटपुट निवडा
- आउटपुट डिव्हाइस निवडा
- कंट्रोलरशी जोडलेला हेडसेट निवडा
- सर्व ऑडिओसाठी हेडफोनवर आउटपुट सेट करा
- व्हॉल्यूम पातळी समायोजित करा

कंट्रोलर रीसेट करत आहे
- जर झीरो वायरलेस कंट्रोलर प्रतिसाद देत नसेल किंवा कोणत्याही वेळी कन्सोलशी कनेक्ट होऊ शकत नसेल, किंवा टचपॅडच्या समोरील लाईट अनपेक्षितपणे चमकत असेल, तर तुम्हाला कंट्रोलर रीसेट करावा लागेल.
- Please use a Paper Clip or similar to press and hold the RESET(U) button for 2 seconds on the underside of the controller; this will put the controller into its original factory state.
- You will need to reconnect the controller to the console.
Modifying Your Controller
- The Simple and easy way to modify your Controller is by using the accompanying Xero Configurator App.
- In the App, you can Manage Profiles, Button Remap, Adjust Joystick Sensitivity/Dead Zones, Adjust Trigger Sensitivity, Recoil Compensation, Vibration, Sound and more.
आता उपलब्ध
on your app store
कंट्रोलर मोड
- कृपया लक्षात ठेवा: खालीलपैकी कोणतेही काम करण्यासाठी तुमचा झीरो वायरलेस कंट्रोलर PS5 कन्सोलशी जोडलेला आणि कनेक्ट केलेला असणे आवश्यक आहे.
- Also, make sure the controller has not gone into sleep mode.
- झीरो कंट्रोलरमध्ये ऑपरेट करण्यासाठी दोन मोड आहेत.
मानक नियंत्रक मोड
- In this mode, the controller will operate similarly to a regular PS5 controller.
- The cluster of lights will change depending on the game you are playing or which menu you are in on the interface.
झीरो रीमॅप मोड
- In this mode, the controller will always be flashing many YELLOW lights. You are required to be in this mode to PLAY, MODIFY or DELETE a remapping Profile.
- दोन्हीपैकी एका मोडमधून दुसऱ्या मोडवर जाण्यासाठी, (शेअर + पर्याय) एकत्र धरा.
- खालील पायऱ्या तुम्हाला रीमॅपिंग प्रक्रियेत मार्गदर्शन करतील.
- माजीampले इलस्ट्रेटेड रीमॅपिंग करत आहे
button to one of the rear paddles, in this case, the FUNCTION R. The buttons being pressed in this process are indicated in RED below.
- जर कंट्रोलर आधीच रीमॅप मोडमध्ये नसेल (पिवळा फ्लॅशिंग). दिवे पिवळे होईपर्यंत शेअर + ऑप्शन बटणे एकत्र दाबून आणि धरून ते सक्रिय करा.
- Proceed to 3 unless you want to change the SLOT being modified.

- Proceed to 3 unless you want to change the SLOT being modified.
- Quickly press the SHARE button to scroll through to desired slot 1, 2, 3, 4 or 5 (here, SLOT2 is selected).

- Press & hold the SHARE button while also holding the FUNCTION R paddle you wish to assign to, the lights will start to flash quickly in BLUE, now release the buttons.

- निवडा (
) बटण जे तुम्हाला निवडलेल्या FUNCTION R पॅडलवर पुन्हा मॅप करायचे आहे.
- निळे दिवे थोडक्यात घट्ट होतील जेणेकरून रीमॅप काम करत आहे हे दिसून येईल, नंतर ते पुन्हा चमकणाऱ्या पिवळ्या रंगात येतील.

- निळे दिवे थोडक्यात घट्ट होतील जेणेकरून रीमॅप काम करत आहे हे दिसून येईल, नंतर ते पुन्हा चमकणाऱ्या पिवळ्या रंगात येतील.
- Now, each time the FUNCTION R paddle is pressed it will produce (in our exampले) अ
आज्ञा
- मानक
कंट्रोलरवरील बटण देखील नेहमीप्रमाणे काम करेल.
- मानक
- If you wish to assign a second button to the other function paddle, simply repeat steps 3 & 4, selecting the desired paddle & button to change.
- तुम्ही आता अधिक बटणे रीमॅप करू शकता किंवा रीमॅप सक्रिय असताना गेमिंग सुरू ठेवण्यासाठी सध्याच्या पिवळ्या फ्लॅशिंग स्थितीत सोडू शकता.
- जर कंट्रोलर आधीच रीमॅप मोडमध्ये नसेल (पिवळा फ्लॅशिंग). दिवे पिवळे होईपर्यंत शेअर + ऑप्शन बटणे एकत्र दाबून आणि धरून ते सक्रिय करा.
व्यवस्थापन प्रोफाइल
- Your Xero Wireless controller comes with 5 built-in Remap Profiles which you can customise to suit your gaming needs.
- Each profile is depicted by the number of lights illuminated on the controller.
- To switch between profiles, quickly press the SHARE button when in “Remap” mode, and the lights will cycle through the 5 profiles continuously.
- तुम्हाला ज्याला सुधारायचे आहे, हटवायचे आहे किंवा सक्रिय ठेवायचे आहे त्यावर थांबा.

- Each profile can be configured individually with remapped buttons to suit a specific game. Within each profile, you can remap as many buttons as you wish.
- All of the remapped buttons are saved to the controller, so when you exit remap mode or turn off your controller, they will still be there when you turn it back on again.
- When you turn back on the controller or return to remap mode, the profile you were last in will be loaded and will be indicated by the corresponding number of lights.
रीमॅपिंग पर्याय
झीरो वायरलेस कंट्रोलरचे रीमॅपिंग फंक्शन तुम्हाला हे करण्याची परवानगी देते:
- Switch the buttons with each other.
- Have several of the same buttons.
- अनेक बटणे एकाशी मॅप करा.
- मागील फंक्शन पॅडल्समध्ये बटणे जोडा.
EXAMPलेः
- जर तुम्हाला बदलायचे असेल तर
ला
. - तुम्ही रीमॅप मोडमध्ये आहात याची खात्री करा (पिवळे फ्लॅशिंग लाईट्स), शेअर बटण दाबून प्रोफाइल बदला (जर तुम्हाला हवे असेल तर).
- नंतर SHARE + दाबून ठेवा.
दिवे निळे होईपर्यंत, आता सोडा. दाबा
, now the light will turn solid BLUE to signify it has been remapped, then will return to the flashing YELLOW of the active slot. - आता दाबून
बटण दाबण्याचा परिणाम होईल
. - बटण
कंट्रोलरवर अजूनही म्हणून कार्य करेल
तसेच, बटणे नियुक्त करताना हे लक्षात घ्या. - It is also easy to map multiple buttons to just one on the controller.
- उदाample, you could have L1+L2 mapped to the single Function R paddle on the rear of the controller
- To do this, simply press L1+L2 at the same time when assigning your buttons to Function R.
रीमॅपिंगसाठी खालील डिजिटल बटणे वापरली जाऊ शकतात:![]()
- To reset an individual button within a profile, hold SHARE and the specific button until the lights flash BLUE, then simply press the SHARE button again; that button will now be the default PS5 button again.
- To erase the mapping for a whole profile, toggle to the desired one by tapping the SHARE button, then hold the SHARE button for about 3 seconds until all lights turn RED. That Profile is now erased and returned to the default PS5 button setup.
- Remember, the controller will only work with your modified buttons if the controller is still in “remap mode” with the YELLOW profile lights illuminated on the controller.
देखभाल आणि सुरक्षितता
- Do not use in places with high humidity, high temperatures, dust, strong magnets or corrosive gases.
- कंट्रोलर वेगळे करू नका किंवा त्यात बदल करू नका.
- Do not insert foreign objects into any part of the controller and its ports.
- कंट्रोलर स्वच्छ करण्यासाठी सॉल्व्हेंट्स किंवा रसायने वापरू नका.
- कंट्रोलर स्वच्छ करण्यासाठी फक्त कोरडे, मऊ कापड वापरा.
- पाण्यापासून दूर ठेवा.
- कंट्रोलर अस्थिर पृष्ठभागावर ठेवू नका.
- कंट्रोलरच्या वर वस्तू ठेवू नका.
- Do not place the controller in places which could harm others.
- कंट्रोलर फेकू नका किंवा टाकू नका किंवा त्याला हिंसक शक्तींच्या अधीन करू नका.
- यूएसबी केबल काढताना, कन्सोल किंवा कंट्रोलरला नुकसान होऊ नये म्हणून ते हळूवारपणे काढा.
सावधगिरी
- लहान मुलांच्या आवाक्याबाहेर ठेवा.
- जास्त काळ वापर टाळा.
- तुमच्या श्रवणशक्तीचे रक्षण करण्यासाठी हेडफोन वापरत असाल तर आवाज मर्यादित करा.
- Be aware of your surroundings when playing.
- जर तुम्हाला थकवा किंवा आजारी वाटत असेल तर खेळणे थांबवा.
- Do not handle an exposed or damaged lithium-ion battery.
स्टोरेज
- Do not store or transport where high temperatures and humidity are present.
- धूळ, धूर किंवा वाफेच्या संपर्कात येऊ नका.
- थेट सूर्यप्रकाशापासून दूर ठेवा.
- हे उत्पादन सोनी इंटरॅक्टिव्ह एंटरटेनमेंट इंक द्वारे प्रायोजित, समर्थित किंवा मंजूर केलेले नाही.
तांत्रिक सहाय्य
- डेटेलच्या ग्राहक सेवा विभागाशी संपर्क साधण्यापूर्वी, कृपया खात्री करा की तुम्ही या मॅन्युअल/मार्गदर्शिकेतील माहिती वाचली आणि समजली आहे.
- तुम्ही समर्थनाशी संपर्क साधल्यास, तुम्ही हे उत्पादन कधी आणि कुठे खरेदी केले याची माहिती तुमच्याकडे असल्याची कृपया खात्री करा.
- डेटेल ग्राहक सेवा
- ग्राहक सेवा,
- डेटेल इलेक्ट्रॉनिक्स लिमिटेड,
- स्टॅफोर्ड रोड,
- दगड,
- स्टाफर्डशायर,
- ST15 0DG.
- युनायटेड किंगडम
- Web: https://support.codejunkies.com
- © 2025 Datel Ltd. Xero is a trademark of Datel Ltd. PlayStation is a trademark or registered Trademark of the SONY COMPANY. All other trademarks are the property of their respective owners.
- Xero Wireless Controller is a 100% unofficial product and is NOT sponsored, endorsed or approved by SONY, nor any game developer or publisher.
वारंवार विचारले जाणारे प्रश्न
How do I charge the controller when the PS5 is in rest mode?
You need to enable charging while in rest mode in the console settings. The controller can also be charged using other USB power sources.
Can multiple controllers be connected to one user profile?
The PS5 supports one primary controller per user profile. To use an additional controller with an existing user, you may need to log out any connected controllers.
कागदपत्रे / संसाधने
![]() |
Xero PS5 Wireless Controller [pdf] वापरकर्ता मार्गदर्शक PS5 वायरलेस कंट्रोलर, PS5, वायरलेस कंट्रोलर, कंट्रोलर |

