UGAME Y5A Arcade Controller
उत्पादन संपलेview
The Y5A Arcade Controller is a multi-platform gaming device compatible with PC, Mac, Android, Nintendo Switch, and PS3. It supports both wired and wireless connections, offering flexible and convenient operation for various gaming environments.
Y5A Instruction
- होम बटण
- टर्बो बटण
- Share Button (Screenshot Button)
- Map Button (Select/”-
- Menu Button (Start/”+”)
- रीसेट बटण
- Connection Mode Button
- Type-C Charging/Data Port
- बॅटरी कंपार्टमेंट
- 2.4G/WiFi Receiver
नोंद: When switching modes, the arcade controller will automatically power off. Press the Home button to nower on and reconnect to the last used mode.
पीसीशी कनेक्ट करा
वायर्ड कनेक्शन
झिनपुट मोड
Connect the arcade controller to a PC or Android device via USB cable. Channel indicators 1 and 4 will light up.
वायरलेस कनेक्शन
Bluetooth – Xinput Mode
- Toggle the switch to “BT” mode.
- With the controller off, hold the Home button for 3 seconds.
- साठी शोधा “Xbox Wireless Controller” on PC and connect.
Once connected, the channel indicator will stay solid
12.4G – Xinout Mode
- Insert the receiver into the PC. The white LED will blink while waiting for connection.
- Toggle the switch to the Receiver Icon.
- With the controller off, hold the Home button for 3 seconds. Channels 1-4 will flash rapidly to enter pairing mode.
Once connected, the channel indicator will stay solid.
वायर्ड कनेक्शन
स्विच मोड
Connect the arcade controller to a Mac via USB cable. Channel indicator 1 will light up.
वायरलेस कनेक्शन
Bluetooth – Xinput Mode
- Toggle the switch to “BT” mode.
- With the controller off, hold the Home button for 3 seconds.
- साठी शोधा “Xbox Wireless Controller” on PC and connect.
Android शी कनेक्ट करा
Connect the arcade controller to a PC or Android device via USB cable. Channel indicators 1 and 4 will light up.
वायरलेस कनेक्शन
Bluetooth – Xinput Mode
- Toggle the switch to “BT” mode.
- With the controller off, hold the Home button for 3 seconds.
- साठी शोधा “Xbox Wireless Controller” on PC and connect.
- Once connected, the channel indicator will stay solid.
झिनपुट मोड
- Insert the receiver into the device. The white LED will blink while waiting for connection.
- Toggle the switch to the Receiver Icon.
- With the controller off, hold the Home button for 3 seconds.
- Once connected, the channel indicator will stay solid.
Nintendo स्विचशी कनेक्ट करा
वायर्ड कनेक्शन
Connect via USB to the Switch dock’s USB port or use an adapter to connect to the console’s bottom port. Channel indicator 1 will light up.
वायरलेस कनेक्शन
Bluetooth – Switch Mode
- Toggle the switch to “NS” mode.
- With the controller off, hold the Home button for 3 seconds.
- Enter the Switch console interface and select[Controllers] settings
- Choose [Change Grip/Order]
PS3 शी कनेक्ट करा
Connect to the PS3 console via USB cable, then press the Home button. Channel indicators 2 and 3 will light up.
कार्य वर्णन
- पॉवर बंद
- Press and hold the Home button for 5 seconds to turn off the controller.
- Press the Reset button (next to the mode switch) to force shutdown.
- Turbo Function (No Memory Storage)
- Supported Buttons:
- Semi-Auto Turbo: Press and hold any button, then press the Turbo button to enable semi-auto turbo mode. Release the button to stop turbo.
- Auto Turbo: If a button is already in semi-auto turbo mode, press the Turbo button again to enable full-auto turbo mode. The button will continuously activate until pressed again to disable.
- Cancel Turbo: Press the button with turbo enabled while simultaneously pressing the Turbo button to restore it to normal.
- Clear All Turbo Settings: Press the Turbo button and the Map button simultaneously.
- Supported Buttons:
- Arcade Stick Mode Switching (Default: D-Pad Mode)
- फर्मवेअर अपग्रेड
- Power off the arcade controller.
- Press and hold the Menu button while connecting to a PC via USB.
- Channel indicators 1, 2, 3, and 4 will flash once, indicating upgrade mode.
- Run the firmware update tool to complete the upgrade.
सुरक्षा आणि देखभाल
- Keep the arcade controller dry and avoid extreme temperatures.
- Use the original USB cable or a certified alternative for charging and connection. Input: 5V/1A
- If the device becomes unresponsive, press the Reset button to reboot.
समर्थन आणि सेवा
मदतीसाठी, संपर्क साधा support@datafrogx.com
FCC चेतावणी विधान
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- रिसिव्हिंग अँटेना पुनर्स्थित करा किंवा पुनर्स्थित करा.
- उपकरणे आणि रिसीव्हरमधील पृथक्करण वाढवा.
- रिसीव्हर कनेक्ट केलेल्या सर्किटपेक्षा वेगळ्या सर्किटवरील आउटलेटमध्ये उपकरणे कनेक्ट करा.
- मदतीसाठी डीलर किंवा अनुभवी रेडिओ/टीव्ही तंत्रज्ञांचा सल्ला घ्या. हे डिव्हाइस FCC नियमांच्या भाग 15 चे पालन करते. ऑपरेशन खालील दोन अटींच्या अधीन आहे:
- हे डिव्हाइस हानीकारक हस्तक्षेप होऊ शकत नाही, आणि
- या उपकरणाने अवांछित ऑपरेशनला कारणीभूत ठरू शकणार्‍या हस्तक्षेपासह, प्राप्त झालेला कोणताही हस्तक्षेप स्वीकारला पाहिजे. FCC रेडिएशन एक्सपोजर स्टेटमेंट
सामान्य RF एक्सपोजर आवश्यकता पूर्ण करण्यासाठी डिव्हाइसचे मूल्यमापन केले गेले आहे. साधन निर्बंधाशिवाय पोर्टेबल एक्सपोजर स्थितीत वापरले जाऊ शकते.
कागदपत्रे / संसाधने
 |
UGAME Y5A Arcade Controller [pdf] वापरकर्ता मॅन्युअल Y5A, Y5A Arcade Controller, Arcade Controller, Controller |