Timers LogoLiveWell Aerator Timer
Configurable via Wi-Fi
V3.0.2Timers LiveWell Aerator Timer Configurable Via Wi-F

वाय-फाय द्वारे कॉन्फिगर करण्यायोग्य लाइव्हवेल एरेटर टाइमर

!!! इशारा !!!
DO NOT return the item to the original retailer. Contact the support for any problem with the item or item delivery. timersshop@gmail.com वर ईमेल करा
लाईव्हवेल पंप टायमर पंपला सायकलिंग ऑन-ऑफ मोडमध्ये चालवतो, ज्यामुळे वापरकर्त्याला प्रत्येक कालावधीचा कालावधी सेट करता येतो. पंप ० ते १००% च्या ड्युटी सायकलवर चालू शकतो. उदाहरणार्थample, the timer can operate at 80% duty for the first ten seconds and switch to a lower 25% duty for the next five minutes. The timer includes an initial priming phase, which is executed upon initial power-up. Additionally, two optional wires can be configured to override the duty cycle from 0 to 100% and restart the priming phase. Unit dimensions: 40x35x10mm (1.6×1.4×0.4inch)
खंडtagई श्रेणी: ६- १८ व्ही. कमाल विद्युत प्रवाह १० amp
Temperature range: -40C 80C (-40F – 176F)
*** For up-to-date installation instructions and videos, visit http://doc2.us/main 

ऑन-ऑफ स्विचसह मानक टायमर कनेक्शन.

Timers LiveWell Aerator Timer Configurable Via Wi-F - Standard

प्री-प्रोग्राम केलेले आणि चालू ऑपरेशन दरम्यान स्विच करण्यासाठी 3-पोझिशन स्विचसह टायमर कनेक्शन.

Timers LiveWell Aerator Timer Configurable Via Wi-F - Standard 1
सिंक ग्राउंड आउटपुट (संत्रा) सह पर्यायी पंप नियंत्रण.

Timers LiveWell Aerator Timer Configurable Via Wi-F - Standard 2

वरीलपैकी एका आकृतीनुसार टायमर कनेक्ट करा:
लाल - शक्ती
काळा - जमीन
Yellow – Pump positive
Blue/Green – Optional duty override switches
White – Optional Wi-Fi enable button
Orange – Pump sink control

टाइमर कॉन्फिगरेशन:

To adjust the timer’s settings, place the module into configuration mode by applying power and then connecting the white wire momentary to the ground. (Do not connect white to the ground permanently).
मॉड्यूल कॉन्फिगरेशन संगणक किंवा स्मार्टफोनला वाय-फाय नेटवर्कद्वारे लाइव्हवेल टाइमर मॉड्यूलशी जोडून केले जाते. खालील चरणांचे अनुसरण करा:

  1. साठी शोधा the available Wi-Fi networks on your computer/phone.
  2. Connect the computer/phone to the “Timers.shop.wifinnn” wireless network.
  3. Open a browser and enter the following into the address bar: 192.168.4.1, then click Go or Connect. Use the browser’s address bar and not a search bar like Google.
  4. Once connected, you will be presented with the following menu. If the menu looks different, check the UI and Firmware update here.Timers LiveWell Aerator Timer Configurable Via Wi-F - Standard 3
  5. Click on LIVEWLL CONFIGURATION and make necessary changes to the timer’s configuration.Timers LiveWell Aerator Timer Configurable Via Wi-F - CONFIGURATION
  6. Once the necessary changes are made, click SAVE. Recycle power to test the newly updated configuration.

या कॉन्फिगरेशनमध्ये एक प्राइमिंग टप्पा आणि एकामागून एक सादर केलेले तीन अनुक्रमिक कालावधी असतात.ampवरील ले ५ सेकंदांसाठी १००% वर प्राइम करेल, नंतर १० सेकंदांसाठी ३०% आउटपुट, ५ सेकंदांसाठी ८०% आणि १० सेकंदांसाठी ३०% आउटपुटमधून सायकल करेल. या कालावधीत पंप थांबवण्यासाठी, ड्यूटी ०% वर सेट करा. कालावधी ० सेकंदांवर सेट करून कालावधी ३ अक्षम केला जाऊ शकतो.
Time features two outputs: Positive – Yellow and Ground control – Orange. Set the output type according to the wiring configuration.
The timer features two input controls: Blue – Duty override, and Green – restart priming.  To test the pump’s response to the specific PWM value, click on the TEST PUMP PWM RESPONSE menu and evaluate various duty cycles to ensure the pump operates at the appropriate rate. The pump must be submerged in water, as the dry pump response will differ.
Watch configuration video: https://youtu.be/882v-uIxRNE

समस्यानिवारण:

  • If you lose a network connection to the network ‘Timers.shop. wifi’, try disabling automatic connections to other known networks. Some computers/phones will try to switch the network if the current network does not appear to be connected to the Internet.
  • If no menu actions are taken, the unit restarts after 5 minutes of inactivity.
  • If the module does not produce Wi-Fi, ensure the White wire is not permanently grounded. It should be momentarily grounded once the timer is powered on to enable WiFi.
  • If you see only the Firmware update menu, ensure that the White wire is not connected to the ground. Recycle the unit’s power and then momentarily ground the White wire.
  • If you run into other issues, the Live Chat is available on our main page: https://timers.shop

जुनी हस्तपुस्तिका:
http://timers.shop/assets/documentation/LivewellAeratorTimerWiFi_V1.0.0.pdf
http://timers.shop/assets/documentation/LivewellAeratorTimerWiFi_V1.0.2.pdf
http://timers.shop/assets/documentation/LivewellAeratorTimerWiFi_V1.0.3.pdf

http://timers.shop
आम्हाला Facebook वर लाईक करा
YouTube चॅनल

कागदपत्रे / संसाधने

Timers LiveWell Aerator Timer Configurable Via Wi-F [pdf] सूचना
LiveWell Aerator Timer Configurable Via Wi-F, Aerator Timer Configurable Via Wi-F, Timer Configurable Via Wi-F, Configurable Via Wi-F

संदर्भ

एक टिप्पणी द्या

तुमचा ईमेल पत्ता प्रकाशित केला जाणार नाही. आवश्यक फील्ड चिन्हांकित आहेत *