TASCAM MP-800U Player with Bluetooth Receiver
तपशील
- मॉडेल: MP-800U
- अद्ययावत पद्धत: यूएसबी फ्लॅश ड्राइव्ह
- उत्पादक: TASCAM
फर्मवेअर आवृत्ती तपासत आहे
Before starting firmware update procedures, check the firmware version of the MP-800U you are using.
- Press the POWER switch to turn the unit on. Wait until the startup logo disappears and the function name (“USB” etc.) is shown at the top left of the screen.
- Press the main unit HOME/MENU button or the remote control MENU button to open the Menu Screen.
- Select Information by turning the main unit MULTI JOG dial or using the remote control
/
buttons, and press the main unit MULTI JOG dial or remote control ENTER button. The MAIN version will be shown on the screen.
- Turn the main unit MULTI JOG dial clockwise or use the remote control
button to show the SUB version.
- Turn the main unit MULTI JOG dial clockwise or use the remote control button to show the serial number.
- Press the main unit MULTI JOG dial or remote control ENTER button to return to the Menu Screen.
- Press the main unit BACK [PAIRING] button or the remote control
मुख्य स्क्रीनवर परत येण्यासाठी बटण.
Firmware update procedures (USB flash drive only)
लक्ष द्या
The firmware of MP-800U can be updated using a USB flash drive. While updating, do not turn the power OFF. Doing so could damage the firmware, making further updating and ordinary operation impossible.
Main firmware (MCU and SUB) update
- Download the latest firmware from the TASCAM webजागा . https://tascam.jp/int/product/mp-800u/support डाउनलोड केलेले डीकंप्रेस करा file if it is in ZIP format or another compressed file प्रकार
- कॉपी करा file फर्मवेअर च्या file to the root folder of a USB flash drive. (Never change the file नाव.)
- Press the POWER switch to turn the unit off if it’s on.
- Connect the USB flash drive to the USB FLASH DRIVE port on the front panel.
- Press the POWER switch to turn the unit on. The startup screen will be shown.
The current Main version will be shown for a few seconds. 
The current Sub version will be shown for a few seconds.
Version Up will be shown.
- Select OK by turning the main unit MULTI JOG dial or using the remote control / buttons, and press the main unit MULTI JOG dial or remote control ENTER button. The current and updated versions will be shown.
- दाबा
(PLAY) button to start the update process.
The number of rectangles displayed between > and < will increase dynamically to show the update progress.
लक्ष द्या: Never disconnect the power cable during this operation, or the firmware could be miswritten, causing the unit to not restart. When the firmware update completes, the following message appears.
- Press the POWER switch to turn the unit off.
- Disconnect the USB flash drive. Press the POWER switch to turn the unit on if needed.
वारंवार विचारले जाणारे प्रश्न
Q: Can I update the firmware using methods other than a USB flash drive?
A: No, the MP-800U firmware can only be updated using a USB flash drive.
प्रश्न: फर्मवेअर अपडेट प्रक्रियेत व्यत्यय आल्यास मी काय करावे?
A: If the update process is interrupted, do not disconnect power. Contact customer support for assistance.
कागदपत्रे / संसाधने
 |
TASCAM MP-800U Player with Bluetooth Receiver [pdf] स्थापना मार्गदर्शक MP-800U Player with Bluetooth Receiver, MP-800U, Player with Bluetooth Receiver, with Bluetooth Receiver, Bluetooth Receiver |