TARAMPS PRO2.4BT DSP डिजिटल ऑडिओ प्रोसेसर सूचना पुस्तिका

उत्पादनाचे नाव: तारamps PRO 2.4BT डिजिटल ऑडिओ प्रोसेसर
DSP Resolution: 24-बिट / 48KHz
कनेक्टिव्हिटी: ब्लूटूथ
नियंत्रण: App-controlled via TARAMPएस प्रो अ‍ॅप
वैशिष्ट्ये: Crossover filters, time alignment, gain control,phase inversion, limiter, signal routing, graphic and parametric equalizers

उत्पादन वापर सूचना

सुरक्षितता आवश्यकता:
Installation must be done by a qualified professional. Please read the manual before use to understand precautions and safety recommendations.

स्थापना संपलीview:
Ensure proper connections including negative power supply,remote input/output, and positive power connection. Pay attention to safety symbols throughout the manual.

डीएसपी ओव्हरview:
The PRO 2.4BT features advanced components like audio signal inputs A and B, Bluetooth connectivity, input/output clip indicators, power connector, selection/mute buttons, and input gain controls.

प्रारंभ करणे:

तुमचा PRO 2.4BT वापरण्यास सुरुवात करण्यासाठी:

दिलेल्या वायरिंग आकृतीचे अनुसरण करून डीएसपी स्थापित करा.
TAR डाउनलोड कराAMPS PRO app from Google Play Store (Android) or App Store (iOS) with minimum requirements of Android 8.1 / iOS 16.

परिचय

टार निवडल्याबद्दल धन्यवादamps product. The PRO 2.4BT is a digital audio processor with Bluetooth connectivity, allowing full control of settings via smartphone or tablet through a dedicated app. The app provides an intuitive interface, enabling users to make real-time adjustments quickly and easily.

Featuring a high-performance 24-bit / 48KHz DSP, the PRO 2.4BT offers a wide range of precise settings and configurations. It includes crossover filters, time alignment, gain control, phase inversion, limiter, signal routing, as well as both graphic and parametric equalizers designed to optimize the performance of your audio system.

Please read this manual carefully before making any connections or using the product. If you have any questions, contact our technical support at www.taramps.com.br.

बॉक्समध्ये

1 PRO 2.4BT processor
1 Powe supply connector
1 Wire harness
1 ब्लूटूथ अँटेना

सुरक्षा आवश्यकता

To ensure proper use, please read this manual before using your processor. It is important that you are familiar with the PRECAUTIONS listed here.

Installation of this equipment must be performed by a qualified professional.
Use proper tools to install this equipment.
This equipment must be used with 12V batteries. Always check the voltagई प्रतिष्ठापन करण्यापूर्वी.

The equipment must be installed in a firm place and away from heat sources.
Never install it in places exposed to dust, humidity or water. Be sure to install it away from the fuel tank, fuel lines, heat sources or other parts of the vehicle.

Be sure to install a protective fuse or circuit breaker near the battery. Follow the current recommended in this manual. Improper use of the fuse or circuit breaker can cause overheating, smoke, product damage, injury or burns.
Avoid running cables over or through sharp edges. Use rubber or plastic grommets to protect cables that pass through the vehicle body.

The automotive sound system can generate high sound pressure levels. Avoid continuous exposure to levels above 85dB to prevent permanent hearing loss.

महत्त्वाच्या शिफारशी
A wiring gauge of 1.5 mm² is recommended for the positive/negative cables and 0.50 mm² for the remote cable.
For protection, a 1A fuse should be installed near the positive pole of the battery. See more details on page 16 of this manual.

Negative power supply: Connect to the negative pole of the battery.
Remote input: Connect to the remote output of the media receiver or multimedia receiver.

Remote output: To activate the ampलाइफायर
Power Positive: Connect to the positive pole of the battery (12V).

सुरक्षा
या संपूर्ण मॅन्युअलमध्ये, सुरक्षा चिन्हांकडे लक्ष द्या.

हे चिन्ह सावधानता दर्शवते, जे वापरकर्त्यांना महत्त्वाच्या सूचनांबद्दल सतर्क करते. या इशाऱ्यांकडे दुर्लक्ष केल्याने उत्पादनाला दुखापत किंवा नुकसान होऊ शकते.

डीएसपी संपलाview

The PRO 2.4BT oﬀers several advanced features designed to optimize your audio system’s performance. Below is an overview सर्वात महत्वाचे घटक आणि कार्ये:

इनपुट गेन नियंत्रण: MAX: Accepts signals up to 2V RMS (standard sensitivity);
मिनिट: Accepts signals up to 9V RMS without distortion (low sensitivity).

सिग्नल इनपुट:

RCA इनपुट: Accepts low-level, high-impedance signal (ideal for RCA outputs of head units). High-level input: Accepts high-level, low-impedance signals.
This input also enables Auto Turn-On: The DSP automatically powers on when a signal is detected. In this case, connecting the REMOTE IN wire is not necessary.
टीप: Auto turn-on is compatible with most head units, but some models may not trigger it due to internal circuitry. If auto turn-on doesn’t work, connect the REMOTE IN wire manually.

Input Clip Indicator LED: This LED signals that the input signal has reached the maximum level accepted by the processor, which can result in signal distortion. If it lights up, reduce the output level of the signal source and readjust the system’s gain structure accordingly. Limiter / Output Clip Indicator LEDs: These LEDs serve a dual purpose:
When the limiter is disabled, they indicate that the output signal has reached the maximum allowable level (clipping).
When the limiter is enabled, they signal that the limiter is actively engaging—meaning the output signal has reached or exceeded the threshold set in the limiter parameters.
BT Connect LED: Indicates active Bluetooth pairing.
पॉवर कनेक्टर Refer to page 16 for wiring instructions.
ब्लूटूथ अँटेना: For optimal performance, mount the antenna in an open area away from metal parts or electrical wires to prevent signal loss.

सुरू करणे

To start using your PRO 2.4BT, follow these steps:

Install the DSP following the wiring diagram provided on page 16.

TAR डाउनलोड कराAMPGoogle Play Store (Android) किंवा App Store (iOS) वरून S PRO अॅप. किमान आवश्यकता: Android 8.1 / iOS 16.
Power on the DSP. The “BT Connect” LED will begin flashing.

Open the TARAMPS PRO app.
Select Connect to pair with the DSP via Bluetooth.

Or select “Demo Mode” to explore the app without a connection.

अ‍ॅपने विचारल्यावर ब्लूटूथ परवानग्या द्या.

Select the DSP from the list of available units.
For easier identification:
Move your phone closer to the desired processor; “Closest” will appear. Turn oﬀ other nearby units.
Rename each unit in the app for clarity when using multiple units.

Once connected, the BT Connect LED continuously lit.
Enter the default password: 1234; Change it in the the Password / Lock menu for security.

APP मुख्य स्क्रीन फंक्शन्स

Connection Manager: Connect/disconnect DSP (up to 4 units simultaneously).
DSP Name: Tap to rename icon to rename the DSP.
Active Connections: Displays how many units are currently paired.
Input Clip Monitor: Indicates if the input signal is clipping.
Limiter / Output Clip LEDs: Indicate limiter activation and output clipping.
Master Volume Control: Adjusts overall system output level.
Output Gain and Mute: Tap to adjust gain; and long press to mute.
Screen Lock: Swipe right to prevent accidental changes.
Main Menu Access: Swipe left to open advanced audio settings.
टीप: the app is fully responsive and supports both portrait and landscape modes. Horizontal orientation is recommended for features like the Graphic EQ and Crossover for clearer visualization.

मुख्य मेनू ऑडिओ

In the audio menu you will find controls and settings related to audio processing, such as.

Input/output routing: Define how inputs A, B, or A+B are routed to outputs 1 to 4. Use the selector keys to assign signals to each output.

Input graphic equalizer: 15-Band graphic EQ. It can be adjusted from -12 to +12dB, in precise steps of 0.1dB. Adjust it by selecting the band and dragging the knob or by directly typing its parameter using + and – buttons.
EQ PRESETS: You can also select an equalization preset from the list.

Input parametric EQ: Allows precise adjustments of Frequency, Gain and Q Factor. Drag the point on the graph to adjust the Gain, the other parameters are defined by typing the value or adjusting using the buttons on the side of the parameter (+ and -).

क्रॉसओव्हर: This section allows you to define the filters applied to each processor output channel, setting HPF (High Pass Filter) and LPF (Low Pass Filter) frequency cuts up to -48dB/Octave, using either Linkwitz-Riley (LR) or Butterworth (BT) types.

Output Channel: Select the channels (channel 1; channel 2; channel 3; channel 4) on the top of the app;
Adjust the filter points directly by dragging the circles on the graph (left circle = HPF, right circle = LPF);
You can also set and fine-tune the HPF and LPF frequencies using the + and – buttons;
Select the filter type – the response curve will be updated automatically to reflect the chosen filter attenuation;
You can check the curves from all the channels by marking the checkboxes below;

Each output channel’s limiter LED status is displayed directly below the graph;
Use the MUTE buttons to disable output channels.

बंद: क्रॉसओवर बंद

LR12Linkwitz – Rilley c/ -12dB/octave
LR18 Linkwitz – Rilley c/ -18dB/octave
LR24Linkwitz – Rilley c/ -24dB/octave
LR30Linkwitz – Rilley c/ -30dB/octave
LR36Linkwitz – Rilley c/ -36dB/octave
LR42 Linkwitz – Rilley c/ -42dB/octave
LR48Linkwitz – Rilley c/ -48dB/octave

बंद: क्रॉसओवर बंद

ВТ6 Butterworth c/ -6dB/octave
BT12 Butterworth c/ -12dB/octave
BT18 Butterworth c/ -18dB/octave
BT24 Butterworth c/ -24dB/octave
BT30 Butterworth c/ -30dB/octave
BT36 Butterworth c/ -36dB/octave
BT42 Butterworth c/ -42dB/octave
BT48 Butterworth c/ -48dB/octave

Delay alignment: Synchronize audio signals from diﬀerent speakers or audio sources so that they reach the listener at the same time.

Because the voice coils of different transducers—such as woofers, midrange drivers, and tweeters—are not positioned on the same physical plane, time delays can occur between frequency ranges. This misalignment can negatively impact accurate sound reproduction. The Alignment function delays the signals sent to the other transducers so they match the arrival time of the one with the deepest coil position, helping restore accurate sound reproduction.
Use the furthest driver coil as reference
Enter delay values (in centimeters) for each output based on measured difference

Setting the reference voice coil for alignment

Identify the reference voice coil (*) this is the one positioned furthest back from the front baffle of the speaker enclosure. (In the example, the reference point is the center of the horn driver’s coil.)
Measure the distance from this reference coil to each of the other drivers. This distance is referred to as A . Enter the closest matching value (in centimeters) for each output channel.
Repeat this process for all output channels. Use the corresponding buttons to select them.

टप्पा नियंत्रण: Invert output signal phase by selecting 180° option.

मर्यादा: प्रोसेसर आउटपुटच्या कमाल सिग्नल पातळीसाठी मर्यादा म्हणून कार्य करते, जेणेकरून प्रत्येक सिस्टम ट्रान्सड्यूसरसाठी समर्थित पॉवर मर्यादा ओलांडू नये.

लिमिटर पॅरामीटर्स:
स्वयं: Sets the Attack and Release parameters automatically, according to the channel frequency cutoﬀ (HPF). Otherwise, you can set the Attack and Release manually.
उंबरठा - Point when the limiter begins to act (indicated by the RED LED on each output channel in the DSP and by the RED indicator at Limiter/Out Clip into App screen). Drag the point across the graphic to set the threshold, or use the field and +/-. To turn oﬀ the limiter, press the button बंद दिसेपर्यंत.
Attack, or Attack time – Time needed to limiter reduce the gain after the signal reaches the threshold. Set the value using the field and +/-.
Release, or Release time – Time needed to limiter return to the original gain after the signal drops below the threshold. Set the value using the field and +/-.
Select the output channel on the above tabs (channel 1, channel 2, channel 3, channel 4) ; and mute each one with the corresponding button .

आउटपुट पातळी: You can adjust the Master (General) volume, as well as the volumes of the respective outputs, by dragging the point or more precisely using + and -. Volume or gain adjustments take eﬀect only after you stop touching the screen. Each output channel features a limiter/clip LED.

Output parametric EQ: Allows precise adjustments of Frequency, Gain and Q Factor. Drag the point on the graph to adjust the Gain, the other parameters are set by typing in the value or adjusting it using the buttons + and -. Select the output by the tabs (Channel 1, Channel 2, Channel 3, Channel 4), or on the DSP’s 1~4 keys.

Audio Manager: Used for the adjustment and testing of audio systems, the audio manager oﬀers the following operating modes:

चालु बंद: Turns on or oﬀ the signal generator.
Fixed Frequency mode: आपण समायोजित करू शकता amplitude using pinch gestures (open or close two fingers vertically – only when the audio manager is on), by entering a value in the Gain (dB) field or by the rotary button.
In Sweep mode: set the starting and ending frequencies by dragging the dashed lines vertically. You can also increase or decrease the signal amplitude by using a two-finger pinch gesture on the graph.

For more precise adjustments, use the + / – buttons. To start the sweep, select the speed (slow, mid, fast).

Save / load configurations: Store and manage your settings via the app: It allows you to save settings for later recovery or backup, as well as export/import settings presets. There is also a sharing option, so the ?le can be transmitted to another person via instant messaging applications.

Settings can be saved in two ways: On the DSP itself (up to 3 memories) and on the Smartphone / Tablet (Up to 15 memories).
Swipe the memory name horizontally (left or right) to reveal the following options: Load, Export, Rename, and Delete.
For the device’s internal memory, only the Load option is available.
To save a new configuration, tap +New.

Apply saved settings from your smartphone or tablet by choosing SMARTPHONE and pressing the button.

Reset/Restore: This screen also allows you to erase the DSP settings.
Reset Audio Settings: Restores only the audio adjustments to their factory defaults while preserving all other settings (such as memory slots and password).
फॅक्टरी डीफॉल्ट पुनर्संचयित करा: Completely resets the DSP to its original factory state, erasing all settings,saved memories, and passwords. ⚠ caution this action is irreversible.

Save to Device: Up to 3 internal memory slots.
Save to Smartphone/Tablet: 15 प्रीसेट पर्यंत.
पर्याय: Upload, Export, Rename, Delete.
Share settings via apps.

Factory Reset from DSP: You can also perform a factory reset without the app (on the DSP itself): With the device powered oﬀ, press and hold keys 1 and 2 simultaneously.
Hold them until keys 3 and 4 start flashing alternately.
Press key 4/FCN to confirm the reset, or key 3 to cancel.

ही प्रक्रिया डिव्हाइसला त्याच्या फॅक्टरी स्थितीत परत करेल आणि ते पूर्ववत करता येणार नाही.

Password/lock settings: डीफॉल्ट पासवर्ड: 1234.

Change it in the Password / Lock menu.
App access is also protected by the phone’s native security (PIN, Face ID, etc.).

Forgot the password? Perform a factory reset and reload saved settings. (The saved settings must be stored on smartphone previously).

About section: Firmware and App versions Open User Manual

मॅन्युअल डाउनलोड करा
Visit company webसाइट
गोपनीयता धोरणे
Support via WhatApp

डीएसपी इनपुट आणि आउटपुटचे कनेक्शन

चेतावणी
Always observe correct polarity. Use a 1A fuse on the positive power supply line for protection.

तांत्रिक वैशिष्ट्ये

प्रक्रिया करत आहे:

Resolution……………………………………………………………………………………………………24bits
Sampling rate……………………………………………………………………………………………..48KHz

इनपुट आणि आउटपुट:

Number of input channels…………………………………………………………………………………2
Number of output channels………………………………………………………………………………4
Input/output routing:…………………………………………………………………………..A, B, A+B
General gain adjustment:……………………………………………………………………-80 a 0dB
Output gain adjustment:………………………………………………………………..-45 a +15dB
Input impedance (RCA):……………………………………………………………………..10K ohms
Input impedance (high level):……………………………………………………………..50 ohms
Output impedance:……………………………………………………………………………….47 ohms
Maximum input level (RCA, Gain Min):………………………………….25Vpp (9V RMS)
Maximum input level (RCA, Gain Max):………………………………..5,6Vpp (2V RMS)
Maximum input level (High level):……………………………………….28Vpp (10V RMS)
Maximum output level:………………………………………………………..5,9Vpp (2,1V RMS)
Frequency response (-1dB)………………………………………………………….10Hz a 22KHz
Total Harmonic Distortion…………………………………………………………………………0,01%
Signal / Noise Ratio:…………………………………………………………………………………..>90dB
Crosstalk (separation between channels)……………………………………………..>80dB

इनपुट ग्राफिक इक्वेलायझर, १५ बँड, २/३ ऑक्टेव्ह आणि १२ प्रीसेट:

Frequencies:……………………………………….25,40,63,100,160,250,400,630,1K,1.6K,2.5K,4K,6.3K,10K,16KHz
Attenuation / Gain:…………………………………………………………………….-12dB to+12dB

Input Parametric EQ:

Central frequency:………………………………………………variable from 10Hz to 22KHz
Attenuation / Gain:……………………………………………………………………..-12dB a +12dB
Q factor adjustment :………………………………………………………………………………0,4 a 10

Crossover (HPF e LPF):

Cutoff frequency:………………………………………………..variable from 10Hz to 22KHz
Linkwitz Rilley Filters……………………………..-12,-18,-24,-30,-36,-42,-48dB/octave
Butterworth Filters………………………………..-12,-18,-24,-30,-36,-42,-48dB/octave
Alignment (Delay):…………………………………………………………………..8,0mS (272cm)
Phase:……………………………………………………………………………………………………….0 / 180°

Adjustable Limiter:

Threshold:…………………………………………………………………………………………….-24 to 0dB
Attack:………………………………………………………………………………………..0.1mS to 100mS
Release:………………………………………………………………………………………..1mS to1600mS

Output parametric EQ:

Central Frequency:……………………………………………..variable from 10Hz to 22KHz
Attenuation / Gain:……………………………………………………………………-12dB to +12dB
Q Factor Adjustment:…………………………………………………………………………….0.4 to 10
MUTE Function……………………………………………………….Individual at each output

ऑडिओ जनरेटर (साइन वेव्हफॉर्म)

Frequency range:……………………………………………….Variable from 10Hz to 22KHz
Gain:…………………………………………………………………………………………….-60 to 0dB
Modes:…………………………………………………………Fixed Frequency / 3 speed sweep
Setting memory positions:………..Factory default + 3 assignable positions
Access protection:…………………………………….4 password digits (customizable)
Connectivity:…………………………………………………………………..5.4 BLE (Low-Energy)
Simultaneous connections:………………………………………………..Up to 4 products
Typical range, with sight, without obstacles:………………………………………25m
APP compatibility:……………………………………….Android 8.1 / IOS 16 and above
पुरवठा खंडtage:……………………………………………………………………………..10 to 16VDC
Nominal consumption (12.6V):……………………………………………………………..0.20A
Dimensions (WxHxD):……………………198 x 35 x 130mm (7.80″ x 1.38″ x 5.12)
Weight:………………………………………………………………………………………..0.43Kg (0.95lb)

The Bluetooth name and logo are owned by the Bluetooth SIG Inc.

The Android name and logo are owned by Google LLC.

The iOS name and logo are owned by Apple Inc.
Typical range in line of sight, unobstructed, in an open environment. Actual product range depends on the installation environment and may be affected by obstacles such as metal surfaces, walls and other electronic equipment operating in the same place.
The APP of the product may be updated from time to time. Tarampपूर्वसूचना न देता कार्यक्षमता अपडेट करण्याचा, जोडण्याचा, काढून टाकण्याचा किंवा वाढवण्याचा अधिकार s राखून ठेवते.

हमी विधान

TARAMPS, located at 30, Julio Budisk Hwy, Alfredo Marcondes – SP, Brazil, ZIP 19180-120, warrants this product against design, manufacturing, and assembly defects, as well as any inherent design flaws that render it unsuitable for its intended use, for a period of 12 months from the date of purchase.
In the event of a defect covered by this warranty, TARAMPS is responsible solely for the repair or replacement of the unit it has manufactured.

या वॉरंटीमध्ये समाविष्ट नाही:

Products damaged due to incorrect installation, water intrusion, or unauthorized handling;
तुटलेली किंवा टीampतयार वॉरंटी सील;
Use under abnormal conditions;
Defects caused by accessories, modifications, or equipment added to the product;

Physical damage from drops, impacts, or acts of nature (e.g., floods, lightning);
Incomplete or altered warranty card;
Costs related to removal, reinstallation, or transportation of the equipment;
Any damages or losses resulting from the product’s malfunction or downtime.

अधिकृत सेवा केंद्रे

For international support, visit:
https://www.taramps.com.br/en/rede-de-assistencias-tecnicas/ You can also contact our factory support directly:

ईमेल: service@taramps.com.br
Phone: +55 18 3266-4050 / +55 18 99749-3391

अनुरूपता माहिती

अनुरूपतेची घोषणा

TARAMPS Electronics LTDA अल्फ्रेडो मार्कोंडेस – SP ब्राझील
याद्वारे, तारamps Electronics Ltda घोषित करते की उत्पादन PRO 2.4BT खालील सुसंगत मानकांनुसार, निर्देश 2014/30/EU चे पालन करते:

EN 50498:2010
इलेक्ट्रोमॅग्नेटिक कंपॅटिबिलिटी (EMC) – वाहनांमधील आफ्टरमार्केट इलेक्ट्रॉनिक उपकरणांसाठी उत्पादन फॅमिली स्टँडर्ड

EU च्या अनुरूपतेच्या घोषणेचा संपूर्ण मजकूर इंटरनेटवरील उत्पादन पृष्ठावर उपलब्ध आहे.

५७४-५३७-८९००

‘‘This equipment is not entitled to protection against harmful interference and must not cause interference in duly authorized systems.’’

At the end of its useful life, this product should not be disposed of in household waste. Look for an electronic equipment collection or recycling center for correct disposal.

FCC चेतावणी
हे डिव्हाइस FCC नियमांच्या भाग 15 चे पालन करते. ऑपरेशन खालील दोन अटींच्या अधीन आहे:

हे डिव्हाइस हानीकारक हस्तक्षेप होऊ शकत नाही, आणि
अवांछित ऑपरेशनला कारणीभूत असणाऱ्या हस्तक्षेपासह या उपकरणाने प्राप्त झालेला कोणताही हस्तक्षेप स्वीकारला पाहिजे.

टीप: हे उपकरण तपासले गेले आहे आणि ते FCC नियमांच्या भाग 15 नुसार वर्ग B डिजिटल उपकरणाच्या मर्यादांचे पालन करत असल्याचे आढळले आहे.
या मर्यादा निवासी स्थापनेमध्ये हानिकारक हस्तक्षेपापासून वाजवी संरक्षण प्रदान करण्यासाठी डिझाइन केल्या आहेत.
हे उपकरण रेडिओ फ्रिक्वेन्सी उर्जा निर्माण करते, वापरते आणि विकिरण करू शकते आणि, जर सूचनांनुसार स्थापित आणि वापरले नसेल तर, रेडिओ संप्रेषणांमध्ये हानिकारक हस्तक्षेप होऊ शकतो. तथापि, विशिष्ट स्थापनेत हस्तक्षेप होणार नाही याची कोणतीही हमी नाही. जर या उपकरणामुळे रेडिओ किंवा टेलिव्हिजन रिसेप्शनमध्ये हानिकारक हस्तक्षेप होत असेल, जे उपकरणे बंद आणि चालू करून निर्धारित केले जाऊ शकते, वापरकर्त्याला खालीलपैकी एक किंवा अधिक उपायांनी हस्तक्षेप दुरुस्त करण्याचा प्रयत्न करण्यास प्रोत्साहित केले जाते:

रिसिव्हिंग अँटेना पुनर्स्थित करा किंवा पुनर्स्थित करा.
उपकरणे आणि रिसीव्हरमधील पृथक्करण वाढवा.
रिसीव्हर कनेक्ट केलेल्या सर्किटपेक्षा वेगळ्या सर्किटवरील आउटलेटमध्ये उपकरणे कनेक्ट करा.
मदतीसाठी डीलर किंवा अनुभवी रेडिओ/टीव्ही तंत्रज्ञांचा सल्ला घ्या.

टीप: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible forcompliance. such modifications could void the user’s authority to operate the equipment.
सामान्य RF एक्सपोजर आवश्यकता पूर्ण करण्यासाठी डिव्हाइसचे मूल्यमापन केले गेले आहे.
FCC च्या RF एक्सपोजर मार्गदर्शक तत्त्वांचे पालन करण्यासाठी, रेडिएटर आणि तुमच्या शरीरातील अंतर किमान 20 सेमी असणे आवश्यक आहे आणि ऑपरेटिंग आणि इंस्टॉलेशनद्वारे पूर्णपणे समर्थित असणे आवश्यक आहे.

IC चेतावणी
या डिव्हाइसमध्ये परवाना-मुक्त ट्रान्समीटर/प्राप्तकर्ता(रे) आहेत जे इनोव्हेशन, सायन्स आणि इकॉनॉमिक डेव्हलपमेंट कॅनडाच्या परवाना-मुक्त RSS(चे) चे पालन करतात. ऑपरेशन खालील दोन अटींच्या अधीन आहे:

हे डिव्हाइस व्यत्यय आणू शकत नाही.
या उपकरणाने कोणताही हस्तक्षेप स्वीकारणे आवश्यक आहे, ज्यामध्ये हस्तक्षेपाचा समावेश आहे ज्यामुळे डिव्हाइसचे अवांछित ऑपरेशन होऊ शकते.

सामान्य आरएफ एक्सपोजर आवश्यकता पूर्ण करण्यासाठी डिव्हाइसचे मूल्यांकन केले गेले आहे. आरएसएस -102-रेडिओ फ्रिक्वेंसी (आरएफ) एक्सपोजर मार्गदर्शक तत्त्वांचे पालन करण्यासाठी, ही उपकरणे रेडिएटर आणि आपल्या शरीरामध्ये किमान 20 सेंटीमीटर अंतरावर स्थापित आणि चालवली पाहिजेत.

द्वारे उत्पादित:
TARAMPS ELECTRONICS LTDA TAX ID: 11.273.485/0001-03 Highway: Júlio Budisk, SN, KM 30 Alfredo Marcondes – SP
ब्राझील मध्ये केले

www.taramps.com.br

वारंवार विचारले जाणारे प्रश्न

Can I adjust settings in real-time using the TARAMPएस प्रो अॅप?

Yes, the app allows for real-time adjustments to optimize your audio system's performance.

What is the input gain control range for the PRO 2.4BT?

The input gain control accepts signals ranging from 2V RMS (standard sensitivity) to 9V RMS without distortion (low sensitivity).

कागदपत्रे / संसाधने

TARAMPएस प्रो२.४बीटी डीएसपी डिजिटल ऑडिओ प्रोसेसर [pdf] सूचना पुस्तिका
PRO2.4BT, PRO2.4BT DSP डिजिटल ऑडिओ प्रोसेसर, DSP डिजिटल ऑडिओ प्रोसेसर, डिजिटल ऑडिओ प्रोसेसर, ऑडिओ प्रोसेसर

संदर्भ

वापरकर्ता मॅन्युअल

TARAMPएस प्रो२.४बीटी डीएसपी डिजिटल ऑडिओ प्रोसेसर

उत्पादन माहिती