सुपरलाइटिंगएलईडी डब्ल्यूएफ३११ वायफाय डीएमएक्स मास्टर कंट्रोलर

उत्पादन तपशील

• नाव: वायफाय-डीएमएक्स मास्टर कंट्रोलर
• मॉडेल: WF311

उत्पादनाचा सारांश

हा कंट्रोलर आमच्या कंपनीने स्वतंत्रपणे विकसित केलेला वायफाय टू डीएमएक्स कंट्रोलर आहे. त्याची मुख्य कार्ये म्हणजे ५१२ चॅनेल मंद करणे, दृश्ये सेट करणे आणि कॉल करणे आणि मोबाइल एपीपी पॅनेलवरील साधे डायनॅमिक मोड आणि बारसाठी प्रकाश नियंत्रण,tagकाही लहान भागात ईएस, ठिकाणे आणि इतर ठिकाणी. कंट्रोलरवरील स्विचद्वारे अंतर्गत आणि बाह्य डीएमएक्स दरम्यान स्विच करण्यासाठी बाह्य डीएमएक्स सिग्नल देखील जोडला जाऊ शकतो. उत्पादनाची मुख्य वैशिष्ट्ये खालीलप्रमाणे आहेत:

तांत्रिक मापदंड

1. Music mode, 170 RGB pixels of microphone or audio signal jump with the music;
2. 512 channels slide dimming, you can also select the overall brightness dimming of the channel brightness;
3. 512 channel static brightness scene editing and calling;
4. 512 channel dynamic mode editing and calling;
5. To switch the output signal, switch the internal and external DMX signal through the switch interface;
6. Switch between the direct connection and routing modes of the mobile phone and the controller;

 Software technical parameters
Control software：

1. नाव: DMX512
2. Runtime platform: IOS and Android system
3. Language: Automatically switch between Chinese and English according to the mobile phone software language system
4. Category: communications
5. इतर: मोफत, कोणतेही प्लग-इन नाहीत.

Controller technical parameters

1. कार्यरत व्हॉल्यूमtage: DC12V-24V
2. कार्यरत तापमान: -20-60℃
3. Working Power consumption: less than 1.5W
4. आउटपुट: DMX512 सिग्नल (पत्ता 1-512)
5. कम्युनिकेशन प्रोटोकॉल: आर्ट-नेट, DMX512
6. निव्वळ वजन: 333 ग्रॅम
7. एकूण वजन: 625 ग्रॅम
8. बाह्य परिमाण: L146*W73*H38 मिमी
9. पॅकिंग आकारमान: L252*W180*H60 मिमी

कंट्रोलर इंटरफेस वर्णन

निर्देशक स्थिती आणि फ्रंट-एंड इंटरफेस सूचना

नाही.	खूण करा	कार्य घोषणा
1	शक्ती	Power indicator light, long-time bright shows power supply normally
2	आत/बाहेर	DMX सिग्नल सोर्स इंडिकेटर लाईट, बंद हा अंतर्गत DMX सिग्नल दर्शवतो, चालू the light represents the external DMX signal, flashing represents the mobile APP instruction issued
3	एपी/एसटीए	Hotspot mode or routing mode, AP mode on, STA mode off;

4	DMX	DMX signal output indicator light, flashing indicates DMX signal output
5	माइक	अंगभूत ऑडिओ हेड
6	ऑडिओ	External audio port, external audio signal is preferred

टीप: If the device has just been powered on, all the indicator lights are on at the same time, indicating that the device is in preparation

Back-end interface description

मजा: Mode switch, reset button

• Mode switching: press the button to switch mode to switch 8 static scenes, 6 dynamic scenes and A total of 15 modes for voice control;
• Reset operation: long press and hold for more than 5 seconds, release the IN/OUT light flashes 4 times, restart the factory setting after power off (it will take about 1 minute to return to normal after power on), WIFI module will switch to AP mode, WIFI will be on, connect WIFI can search the device.

DMX OUT: DMX signal output card mouth;
DMX INT: external DMX signal input card mouth;
स्विच: internal and external DMX signal switching port, K short GND to forward external input DMX signal;

"WF-DMX" हे मोबाईल अॅप वापरण्यासाठी सूचना

1. सारांश
   The mobile APP software “WF-DMX” is the control APP used by the controller, and the APP can edit DMX signals of 512 channels. Users can edit and invoke 8 static scenes and 6 dynamic scenes.
2. सूचना
   1. installation “WF – DMX”
      The software can be installed through the Android or iOS download provided in the CD, and the APP is called WF-DMX.
   2. Connect WIFI network and device
      First of all, the independent WiFi connected to the controller is used. Generally, the SSID is WF311-XXXX. Then open the APP to search for devices, and click on the device to be controlled (tick) to start the control.
   3. राउटर सेटिंग्ज
      Click the router Settings and click the search icon, the input box of WIFI name and password will appear. Please make sure that the password is correct, so as to avoid the need to reset the device and rejoin later. WIFI of the device will be closed after this setting, and only the WIFI can be connected when controlling the device.
   4. Scene jump time
      This function represents the time required for color transition during static scene switching from 0 to 30 seconds.
   5. चॅनेल नियंत्रण
      1. In this page, parameters of each channel can be set directly. Before setting, light the lightbulb icon in the top left corner, and then select the channel (red is the selected state) to adjust the output parameters
      2. The top right side lights up the music icon to indicate “Music Mode”.
         Music mode: devices on the bus beat every 3 channels as an RGB pixel, according to the music rhythm.

Static Scenes
सीन आयकॉनचे नाव बदलण्यासाठी त्यावर जास्त वेळ दाबा. सीन एडिटिंग स्टेटमध्ये प्रवेश करण्यासाठी वरच्या उजव्या कोपऱ्यात क्लिक करा. स्टॅटिक चॅनेल पॅरामीटर्स एडिट केल्यानंतर, ते सेव्ह करणे आवश्यक आहे.

Dynamic scene
The editing method of dynamic scene is similar to that of static scene. Click the upper right corner to enter the editing interface, and long press the icon to rename it. However, there are a few points that need to be noted:

1. Add frame: dynamic scene needs to have a change frame to express the next changed scene. “+” in the lower right corner of the editing interface means to add and enter the configuration of the next frame. (The bottom operation is “return to previous frame”, “delete frame”, “add frame” in order)
2. Hold: Indicates how long the state of this frame lasts (seconds) before entering the next frame, and the output state does not change within the state of this frame.
3. Jump: represents the time (seconds) required for the transition (gradient) of this frame state to the next frame, and the output state will change in the continuous state.
4. Optional unit of time: Click the unit to pop up the unit selection box, there are three units of time to choose, MS, S, M.

Exit routing mode
डिव्हाइस पेज शोधा, राउटिंग मोडमधून बाहेर पडण्यासाठी डिव्हाइस नंबर जास्त वेळ दाबा.

 Controller built-in mode table

नाही.	मोड्स	नाही.	मोड्स
1	स्थिर दृश्य १	9	Dynamic scene 1
2	स्थिर दृश्य १	10	Dynamic scene 2
3	स्थिर दृश्य १	11	Dynamic scene 3
4	स्थिर दृश्य १	12	Dynamic scene 4
5	स्थिर दृश्य १	13	Dynamic scene 5
6	स्थिर दृश्य १	14	Dynamic scene 6
7	स्थिर दृश्य १	15	Music voice control
8	स्थिर दृश्य १

सामान्य कनेक्ट आकृती

 APP controls the internal DMX signal wiring mode

Switch to external DMX signal wiring mode

वारंवार विचारले जाणारे प्रश्न

• Q: How to switch between internal and external DMX signals?
  A: You can switch between internal and external DMX signals through the switch on the controller.
• Q: What are the supported runtime platforms for the control software?
  A: The runtime platform includes iOS and Android systems.
• Q: How to reset the controller to factory settings?
  A: Long press and hold the reset button for more than 5 seconds, then release. The IN/OUT light will flash 4 times, indicating a reset to factory settings.

कागदपत्रे / संसाधने

सुपरलाइटिंगएलईडी डब्ल्यूएफ३११ वायफाय डीएमएक्स मास्टर कंट्रोलर [pdf] सूचना पुस्तिका WF311 वायफाय DMX मास्टर कंट्रोलर, WF311, वायफाय DMX मास्टर कंट्रोलर, मास्टर कंट्रोलर, कंट्रोलर

संदर्भ

• वापरकर्ता मॅन्युअल