PCE INSTRUMENTS PCE-DM 8 Digital Multimeter

तपशील

• Product Name: Digital Multimeter PCE-DM 8
• मापन कार्ये: खंडtage, Resistance, Diode/Buzzer, Capacitance, Frequency, Temperature, NCV (Non-Contact Voltage), LIVE
• Features: Data Hold, Relative Value Measurement, Auto Range Selection, Menu Navigation
• Power Supply: 2 x AA Batteries (Not Included)
• डिस्प्ले: एलसीडी
• परिमाण: 150 मिमी x 70 मिमी x 30 मिमी

उत्पादन परिचय
The Digital Multimeter PCE-DM 8 is a versatile device designed for measuring various electrical parameters.

मेनू परिचय

• To access the menu, long-press the AUTO/MENU key for 2 seconds.
• Navigate the menu using the up, down, left, right, and confirm keys.

बटणे आणि कार्ये परिचय

बटण: कार्य

• खंडtage gear, resistance gear, diode/buzzer gear, capacitance gear, selection key; Enter the menu is the right selection key.
• Data Hold/ Relative Value key: Short press to hold/cancel data, long press for relative value mode; Enter the menu is the up selection key.
• Auto/Menu key: Short press to switch to automatic gear, long press to enter/exit menu; Enter the menu is the confirm key.
• वारंवारता, तापमान, एनसीव्ही, लाईव्ह सिलेक्शन की; मेनूमध्ये एंटर करणे ही डाउन सिलेक्शन की आहे.
• कमी करंट आणि जास्त करंट असलेली सिलेक्शन की; मेनूमध्ये डावीकडील सिलेक्शन की एंटर करा.
• On/Off key: Long-press to turn on/off.

चाचणी पद्धती

सामान्य मोड:

1. Automatic Gear: Connect test pens and let the multimeter identify the signal automatically.
2. खंडtagई मापन: Connect the red test pen to the input terminal and the black test pen to COM.
3. प्रतिकार मापन: Connect the red test pen to the input terminal and the black test pen to COM.
4. Diode/Buzzer Test: Connect test pens and let the multimeter identify the signal.

वापरकर्ता मॅन्युअल

डिजिटल मल्टीमीटर

वापरकर्त्यांना सूचना

• This manual provides a detailed introduction to the product. Please read this manual carefully to ensure you obtain the best state of the product.
• ज्वलनशील आणि स्फोटक वातावरणात इन्स्ट्रुमेंट वापरू नका.
• Waste batteries and instruments cannot be disposed of together with household waste. Please dispose of them by the relevant national or local laws and regulations.
• If there are any quality issues with the device or if you have any questions about using the device, please contact online customer service, and we will solve it for you.

उत्पादन परिचय

• PCE-DM 8 is our newly launched 10000 count intelligent digital multimeter, with a wider measurement range and higher resolution, helping you measure more accurate values. It can accurately measure AC/DC voltage, AC/DC, 10A current, and can also be used to test conductivity, capacitance, frequency, resistance, diode, temperature, NCV, live wire, etc.
• Suitable for various fields of electronic maintenance, such as engineering, laboratories, cars, and home appliances. And it is equipped with a 2.4-inch full color TFT display screen with a resolution of up to 240 * 320, a new UI interface design, and the first monitoring mode function, enriching your use experience and making operation more convenient in various scenarios.

मेनू परिचय

• Long-press the AUTO/MENU key for 2 seconds to enter the menu, and then use the up, down, left, right, and confirm keys to browse the menu and set functions.
  • Mode selection: Normal mode, recording mode, and monitoring mode.
  • थ्रेशोल्ड सेटिंग: व्हॉल्यूमसाठी किमान आणि कमाल थ्रेशोल्ड सेट कराtage, करंट आणि तापमान मॉनिटरिंग मोडमध्ये.
  • History: Store the measurement values saved in the recording mode, with a maximum of 30 records; he latest saved data is in the first record, arranged in descending order, and overwrite the oldest records after over 30 pieces of data.
  • सिस्टम सेटिंग्ज: भाषा, स्क्रीन ब्राइटनेस, तापमान गियर आणि स्वयंचलित शटडाउन वेळ सेट करा.
  • फॅक्टरी सेटिंग्ज पुनर्संचयित करा: फॅक्टरी सेटिंग्ज पुनर्संचयित केल्याने सर्व ऐतिहासिक डेटा साफ होईल आणि फॅक्टरी वेळ सेटिंग्जमध्ये पुनर्संचयित होईल.
  • संबंधित: View manufacturer information, equipment model, and version number.

बटणे आणि कार्ये परिचय

चाचणी पद्धती

सामान्य मोड
सामान्य मोडमध्ये, ते स्वयंचलित, व्हॉल्यूमला समर्थन देतेtage, resistance, diode/buzzer, capacitor, high current, low current, frequency, temperature, NCV, and LIVE measurements.

स्वयंचलित मोजमाप

1. Automatic gear is selected by default when starting in normal mode. Short-press the middle button to switch to automatic gear from other measurement gears.
   लाल टेस्ट पेन इनपुट टर्मिनलशी जोडा. and the black test pen to the input terminal COM. The multimeter will automatically identify the current measured signal based on the voltagमोजलेल्या वस्तूचा e आणि प्रतिकार.
2. Automatic gear: Only voltage resistance a, nd continuity test gears are identified automatically.
3. व्हॉल्यूम मोजतानाtagई, एसी/डीसी व्हॉल्यूमtage is identified automatically.
4. When measuring, if the resistance at both ends is less than 50 Ω, the buzzer will ring.

खंडtage मापन

1. व्हॉल्यूमवर स्विच कराtage gear, connect the red test pen to the input terminal, and the black test pen to the input terminal COM.

प्रतिकार मापन

1. रेझिस्टन्स गियरवर स्विच करा आणि लाल टेस्ट पेन इनपुट टर्मिनलशी जोडा. and the black test pen to the input terminal COM.
2. During measurement, the range gear will be automatically identified.

`Diode /Continuity test measurement

1. Switch to diode/continuity test mode, connect the red test pen to the input terminal, and the black test pen to the input terminal COM. The multimeter will automatically identify the current measured signal based on the voltagमोजलेल्या वस्तूचा e आणि प्रतिकार.
2. Measuring continuity test: when the resistance is less than 50 Ω, the buzzer will ring.
3. डायोड मोजताना, स्क्रीन फॉरवर्ड बायस व्हॉल्यूम प्रदर्शित करतेtage. If the polarity of the test wire is opposite to that of the diode, or the diode is damaged, the screen displays „OL“.

कॅपेसिटन्स मापन

1) Switch to the capacitor gear and connect the red test pen to the input terminal, while the black test pen to the input terminal COM.
2) During measurement, the range gear will be automatically identified.

वारंवारता मोजमाप

1. फ्रिक्वेन्सी गियरवर स्विच करा आणि लाल टेस्ट पेन इनपुट टर्मिनलशी जोडा. while the black test pen to the input terminal COM.
2. During measurement, the range gear will be automatically identified.

तापमान मोजमाप

1. तापमान गियरवर स्विच करा आणि लाल चाचणी पेन इनपुट टर्मिनलशी जोडा. while the black test pen to the input terminal COM.

विद्युत प्रवाह मोजमाप-कमी विद्युत प्रवाह

1. Switch to the low current range, and the maximum measured current is 999.9mA, connect the red test pen to the input terminal mA, while the black test pen to the input terminal COM.

सूचना! If the measured current is greater than 1A, it will burn out the fuse. Please preliminarily evaluate the current situation before measuring.

विद्युत प्रवाह मोजमाप-उच्च विद्युत प्रवाह

1. Switch to the high current range, and the maximum measured current is 9.999A. Connect the red test pen to the input terminal 10A, while the black test pen to the input terminal COM.

सूचना! If the measured current is greater than 10A, it will burn out the fuse. Please preliminarily evaluate the current situation before measuring.

NCV मोजमाप

1. एनसीव्ही गियरवर स्विच करा.
2. At this point, slowly approach the NCV area on the top of the multimeter to the test point. If the built-in sensor senses an AC electromagnetic field, the buzzer will emit a „DiDi“ sound. The stronger the electromagnetic field, the faster the „drip“ sound, and the screen display will change synchronously, as shown in the following figure:

थेट मापन

1. Press the down to switch to the LIVE gear, connect the red test pen to the input terminal, and remove the black test pen.
2. Contact the red test pen with the mains power plug. If the buzzer rings as either a live line or a neutral line, or a ground line, the screen display will change synchronously, as shown in the following figure:

रेकॉर्डिंग मोड
रेकॉर्डिंग मोडमध्ये, ते व्हॉल्यूमला समर्थन देतेtagई, रेझिस्टन्स, डायोड/बजर, कॅपेसिटर, उच्च प्रवाह, कमी प्रवाह, वारंवारता आणि तापमान गीअर्स.

1. The measurement methods for recording mode are the same as those for normal mode. Please read the measurement methods for the normal mode.
2. रेकॉर्डिंग मोड रिअल-टाइम मापन वक्र जोडतो, मापन दरम्यान किमान आणि कमाल मूल्ये रेकॉर्ड करतो आणि नियमित मोडच्या वर मापन डेटा जतन करतो.
3. When measuring, press the middle button briefly. The record box on the right side of the screen will record the measured values at this time and save them to the historical record. The record box can display up to 8 sets of measured values. When it’s over 8 sets, the first set of data is overwritten, and the cycle follows. The data on the yellow line represents the latest recorded measurement value.

मॉनिटरिंग मोड
मॉनिटरिंग मोडमध्ये, ते व्हॉल्यूमला समर्थन देतेtage, करंट आणि तापमान गीअर्स.

1. The measurement methods for monitoring mode are the same as those for normal mode. Please read the measurement methods for the normal mode..
2. The monitoring mode adds threshold monitoring to the normal mode, when the measured value is within the set threshold range, the buzzer will ring, and the screen display will change depending on whether the measured value is less than the set minimum threshold, or greater than the maximum threshold within the minimum and maximum thresholds, as shown in the following figure.

पॅरामीटर्स

कार्य	श्रेणी	अचूकता
डीसी व्हॉलtage	9.999V / 99.99 व् / 999.9 व्ही	± (0.5% + 3)
एसी व्हॉलtage	9.999V / 99.99 व् / 750.0 व्ही	± (1% + 3)
डीसी करंट	9999uA / 99.99mA / 999.9mA / 9.999A	± (1.2% + 3)
एसी करंट	9999uA / 99.99mA / 999.9mA / 9.999A	± (1.5% + 3)
प्रतिकार	9.999MΩ / 999.9KΩ / 99.99KΩ / 9.999KΩ / 999.9Ω	± (0.5% + 3)
	99.99MΩ	± (1.5% + 3)
क्षमता	999.9μF / 99.99μF / 9.999μF / 999.9nF / 99.99nF / 9.999nF	± (2.0% + 5)
	9.999mF / 99.99mF	± (5.0% + 20)
वारंवारता	9.999MHz / 999.9KHz / 99.99KHz / 9.999KHz / 999.99Hz / 99.99Hz / 9.999Hz	± (0.1% + 2)
तापमान	(-55 … 1300°C) / (-67 … 2372°F)	± (2.5% + 5)
डायोड	होय
सातत्य चाचणी	होय
NCV	होय
लाइव्ह	होय
कामाची परिस्थिती	तापमान	१५ … ४०° से
	आर्द्रता	<75%
स्टोरेज परिस्थिती	तापमान	-20 … 60° से
	आर्द्रता	<80%
वजन	185 ग्रॅम
बॅटरी क्षमता	1500mAh

सूचना

• उत्पादन वापरण्यापूर्वी, कृपया शेल आणि इंटरफेसजवळील इन्सुलेशन खराब झाले आहे का ते तपासा.
• Please hold your fingers behind the protective device of the pen.
• चाचणी करायच्या सर्किटचे मोजमाप करताना, सर्व इनपुट पोर्टना स्पर्श करू नका.
• गियरची स्थिती बदलण्यापूर्वी कृपया चाचणी प्रोब आणि सर्किट कनेक्शन डिस्कनेक्ट करा.
• जेव्हा डीसी व्हॉल्यूमtagई चाचणी केली जाणार आहे 36V पेक्षा जास्त आहे आणि AC voltage is higher than 25V, users should pay attention to prevention and avoid electric shock.
• Please select the correct gear for measurement to avoid damage to the instrument. When all measurements exceed the range, the screen will display „OL“.
• When the battery level is too low, a pop-up prompt will appear. Please charge it promptly to avoid affecting the measurement performance. Do not use the device while charging.

विल्हेवाट लावणे
For the disposal of batteries in the EU, the (EU) 2023/1542 directive of the European Parliament applies. Due to the contained pollutants, batteries must not be disposed of as household waste. They must be given to collection points designed for that purpose. In order to comply with the EU directive 2012/19/EU, we take our devices back. We either reuse them or give them to a recycling company, which disposes of the devices in line with the law. For countries outside the EU, batteries and devices should be disposed of according to your local waste regulations. If you have any questions, please contact PCE Instruments.

पीसीई उपकरणे संपर्क माहिती

जर्मनी	फ्रान्स	स्पेन
PCE Deutschland GmbH	पीसीई इन्स्ट्रुमेंट्स फ्रान्स ईURL	PCE Iberica SL
इम लँगेल ४	23, रुए डी स्ट्रासबर्ग	कॉले मूल, 8
D-59872 Meschede	67250 Soultz-Sous-Forets	०२५०० टोबरा (अल्बासेटे)
Deutschland	फ्रान्स	स्पेन
दूरध्वनी: +49 (0) 2903 976 99 0	दूरध्वनी: +33 (0) 972 3537 17	दूरध्वनी : +34 967 543 548
फॅक्सः + 49 (0) 29039769929	फॅक्स क्रमांक: +33 (0) 972 3537 18	फॅक्स: +34 967 543 542
info@pce-instruments.com	info@pce-france.fr	info@pce-iberica.es
www.pce-instruments.com/deutsch	www.pce-instruments.com/french	www.pce-instruments.com/espanol
युनायटेड किंगडम	इटली	तुर्की
पीसीई इन्स्ट्रुमेंट्स यूके लि	PCE इटालिया srl	PCE Teknik Cihazları Ltd.Şti.
ट्रॅफर्ड हाऊस	Pesciatina 878 / B-Interno 6 मार्गे	Halkalı Merkez Mah.
चेस्टर आरडी, ओल्ड ट्रॅफर्ड	55010 Loc. Gragnano	पेहलवान सोक. क्र.6/सी
मँचेस्टर M32 0RS	कॅपनोरी (लुका)	34303 Küçükçekmece – इस्तंबूल
युनायटेड किंगडम	इटालिया	तुर्किये
दूरध्वनी: +44 (0) 161 464902 0	दूरध्वनी: +39 0583 975 114	दूरध्वनी: 0212 471 11 47
फॅक्स: +44 (0) 161 464902 9	फॅक्स: +39 0583 974 824	फॅक्स: ०२१२ ५१३ ८२ १९
info@pce-instruments.co.uk	info@pce-italia.it	info@pce-cihazlari.com.tr
www.pce-instruments.com/english	www.pce-instruments.com/italiano	www.pce-instruments.com/turkish
नेदरलँड	युनायटेड स्टेट्स ऑफ अमेरिका	डेन्मार्क
PCE Brookhuis BV	PCE Americas Inc.	PCE इन्स्ट्रुमेंट्स डेन्मार्क ApS
ट्वेन्टेपोर्ट वेस्ट १७	1201 ज्युपिटर पार्क ड्राइव्ह, सुट 8	बर्क सेंटरपार्क 40
७६०९ आरडी अल्मेलो	ज्युपिटर / पाम बीच	7400 हर्निंग
नेदरलँड	33458 फ्लॅ	डेन्मार्क
फोन: + 31 (0) 53 737 01 92	यूएसए	दूरध्वनी: +45 70 30 53 08
info@pcebenelux.nl	दूरध्वनी: +1 ५७४-५३७-८९००	kontakt@pce-instruments.com
www.pce-instruments.com/dutch	फॅक्स: +1 ५७४-५३७-८९०० info@pce-americas.com www.pce-instruments.com/us	www.pce-instruments.com/dansk

वारंवार विचारले जाणारे प्रश्न

Q: How do I change measurement modes on the PCE-DM 8?
A: To switch between measurement modes, use the respective gear selection keys on the multimeter.

Q: Can I measure capacitance with this multimeter?
A: Yes, the PCE-DM 8 supports capacitance measurement. Switch to the capacitance gear and follow the measurement instructions.

कागदपत्रे / संसाधने

PCE INSTRUMENTS PCE-DM 8 Digital Multimeter [pdf] वापरकर्ता मॅन्युअल PCE-DM 8, PCE-DM 8 Digital Multimeter, Digital Multimeter, Multimeter

संदर्भ

• वापरकर्ता मॅन्युअल