मोडकॉम ज्वालामुखी स्टेलर मिडी संगणक केस
पॅनेल I/O
- पॉवर
- रीसेट करा
- एचडी ऑडिओ
- USB 3.0
- USB 3.0
- यूएसबी-सी
- एलईडी
ॲक्सेसरीज
- A HDD SCREWS
- B MOTHERBOARD & SSD SCREWS.
- C PSU AND GPU SCREWS
- D RISER CABLE STANDOFFS
- E झिप TIE
- F SCREWDRIVER
- G कापड
- H TG PANEL CLIP
- I SSD SILICONE PADS
- J MB STANDOFFS
- K वेल्क्रो स्ट्रॅप्स
- L SSD SCREWS
ओव्हरview
STELLAR NF – NO FANS PRE-INSTALLED
परिमाण
मदरबोर्ड स्थापना
ARGB Hub Installation
PRE-INSTALLED: STELLAR 5F & STELLAR 8F
कार्य
- LED मोड मधून सायकल चालवण्यासाठी LED बटण लहान दाबा.
- मदरबोर्ड कंट्रोलमध्ये मोड बदलण्यासाठी 3 सेकंदांसाठी LED बटण दाबा.
- LED पॉवर बंद करण्यासाठी LED बटण 5 सेकंद दाबा.
- मॅन्युअल कंट्रोलवर परत जाण्यासाठी LED बटण दाबा.
- After connecting the fans to the motherboard PWM, you can control the fan speed from the Motherboard Settings.
- Memory function after power off. CONNECT CONTROLLER TO PROPER FAN CONNECTOR ON M/B. (FOR A MOTHERBOARD EQUIPPED WITH ARGB FAN CONTROL CONNECTORS, CONNECT IT TO LED CONTROL CONNECTOR ON MB) CONNECT POWER SUPPLY TO SATA. CONNECT LED SW.
3.5” HDD इंस्टॉलेशन
2.5” SSD installation
GPU horizontal installation
GPU vertical installation
वीज पुरवठा स्थापना
Quick Start Guide / Installation
- गृहनिर्माण उघडा.
- प्रत्येक घटकासाठी वैयक्तिक असेंबली निर्देशांमधील सूचनांचे अनुसरण करून सर्व संगणक घटक स्थापित करा.
- हाऊसिंगमध्ये माउंट करा आणि पॉवर सप्लायच्या इन्स्टॉलेशन सूचना आणि त्याच्या कनेक्शनची आवश्यकता असलेल्या घटकांच्या सूचनांचे पालन करून आवश्यक घटकांशी वीज पुरवठा कनेक्ट करा. केसच्या खालच्या भागात, फॅन केसच्या बाहेर (खाली) तोंड करून वीज पुरवठा एका बोगद्यामध्ये बसविला जातो.
- घटकांची योग्य असेंब्ली आणि पॉवर प्लगचे कनेक्शन तपासा.
- गृहनिर्माण बंद करा.
- मॉनिटर, कीबोर्ड आणि इतर उपकरणे संगणकाशी कनेक्ट करा.
- पॉवर कॉर्डला पॉवर सप्लायमधील सॉकेट आणि 230V मेन सॉकेटशी जोडा.
- PSU हाऊसिंगवरील पॉवर स्विच I स्थितीवर सेट करा (असल्यास).
This device was designed and made of high-quality reusable materials and components. If the device, its packaging, user’s manual, etc. are marked with crossed waste container, it means they are subject to segregated household waste collection in compliance with the Directive 2012/19/UE of the European Parliament and of the Council.
This marking informs that electric and electronic equipment shall not be thrown away together with household waste after it’s been utilised. The user is obliged to bring the utilised equipment to electric and electronic waste collection point. Those running such collection points, including local collection points, shops or commune units, provide convenient system enabling to scrap such equipment. Appropriate waste management aids in avoiding consequences which are harmful for people and environment and result from dangerous materials used in the device, as well as improper storage and processing. Segregated household waste collection aids recycle materials and components of which the device was made. A household plays crucial role in contributing to recycling and reusing the waste equipment. This is the stage where the basics are shaped which largely influence the environment being our common good. Households are also one of the biggest users of small electrical equipment.
येथे वाजवी व्यवस्थापन एसtage aids and favors recycling. In the case of improper waste management, fixed penalties may be imposed in accordance with national legal regulations.
This marking informs that electric and electronic equipment shall not be thrown away together with household waste after it’s been utilised. The user is obliged to bring the utilised equipment to electric and electronic waste collection point. Those running such collection points, including local collection points, shops or commune units, provide convenient system enabling to scrap such equipment. Appropriate waste management aids in avoiding consequences which are harmful for people and environment and result from dangerous materials used in the device, as well as improper storage and processing. Segregated household waste collection aids recycle materials and components of which the device was made. A household plays crucial role in contributing to recycling and reusing the waste equipment. This is the stage where the basics are shaped which largely influence the environment being our common good. Households are also one of the biggest users of small electrical equipment.
येथे वाजवी व्यवस्थापन एसtage aids and favors recycling. In the case of improper waste management, fixed penalties may be imposed in accordance with national legal regulations.
Computer Case Safety Instructions
- परिचय
Thank you for choosing our computer case. To ensure your safety and proper operation of the device, please read this manual carefully. Following these instructions will help avoid potential hazards and damage to your equipment. - सुरक्षितता चेतावणी आणि सावधगिरी
- स्थापना आणि ऑपरेशन
- Never open the case while it is in operation. Before beginning installation or maintenance, make sure the computer is unplugged.
- Do not use the case in a humid environment. Moisture can cause short circuits and damage to components.
- Be careful of the sharp edges inside the case. Wear protective gloves when installing components to avoid injury.
- Make sure the mounting screws are tightened, but not overtightened. Overtightening can damage the threads.
- वीज पुरवठा
- Only use power supplies that are compatible with the case. An incorrect power supply can cause overheating or short circuits.
- Check for correct wiring. Incorrectly connected cables can damage components and the case.
- Do not load multiple devices on the same electrical circuit. Ensure adequate power stability to avoid overloading the electrical network.
- Ventilation and Overheating
- Ensure adequate airflow. Do not block vents or filters. Clean dust filters regularly.
- Do not install the case in an enclosed space without air circulation. Avoid placing the computer near heat sources such as radiators.
- Monitor component temperatures. If you are using high-performance components, consider installing additional fans or a liquid cooling system.
- स्टोरेज आणि वाहतूक
- Store the case in a dry and clean place. Avoid exposure to extreme temperatures, moisture, and dust.
- Protect the case from shocks during transportation. Use the original packaging or appropriate protective materials.
- स्थापना आणि ऑपरेशन
- विधानसभा सूचना
- विधानसभेची तयारी
- Make sure you have all the required tools (e.g. Phillips screwdriver).
- Choose a suitable work area with access to lighting and sufficient work space.
- घटक स्थापित करणे
- Install the motherboard on the mounting spacers to avoid short circuits.
- Follow the manufacturer’s instructions when installing the CPU, RAM, and graphics card.
- Connect the cables according to the labels on the motherboard and power supply.
- Make sure that all components are properly attached and that no cables block the fans.
- विधानसभेची तयारी
- स्वच्छता आणि देखभाल
- Regularly remove dust from the inside of the case using compressed air.
- Check the condition of the dust filters and clean them every few weeks.
- Do not use any liquid cleaning agents inside the case.
- अतिरिक्त माहिती
- हमी: To avoid voiding the warranty, do not modify the case or its components.
- तांत्रिक सहाय्य: In case of problems, contact our customer service department.
- पुनर्वापर: Dispose of used devices at appropriate recycling points in accordance with local regulations.
Thank you for following these guidelines. Proper use of the case will ensure the safety and longevity of your equipment.
कागदपत्रे / संसाधने
 |
मोडकॉम ज्वालामुखी स्टेलर मिडी संगणक केस [pdf] सूचना पुस्तिका Volcano Stellar Midi Computer Case, Stellar Midi Computer Case, Midi Computer Case, Computer Case |