LTECH E6A Color Temperature Knob Panel
उत्पादन परिचय
- The stylish appearance design is combined with innovative and colorful status indicators, making the interaction of technology clear at a glance;
- 0-10V Analog + Bluetooth dual-mode knob controller, standard 0-10V dimming, Bluetooth SIG Mesh protocol;
- Supports switching between dimming and color temperature;
- Scene actions can be set through NFC or L-Home APP;
- It can be used with Bluetooth remote controls B1, B2, B8 and RC4-BLE control;
- Supports linkage control with L-Home smart home system and APP to realize intelligent control such as local scenes, automation and other intelligent controls;
- With the intelligent gateway, you can realize the linkage control of smart platforms such as HomeKit, Siri, Google, Amazon.
तपशील पॅरामीटर्स
उत्पादनाचा आकार
युनिट: मिमी
उत्पादन कार्य वर्णन
- Scenes key: Factory default color temperature mode: the default lamp color temperatures are 2700K (Key 1), 3500K (Key 2), 5000K (Key 3), and 6500K (Key 4); Single press key 1/2/3/4 of the scene key triggers the scene, which requires binding the scene actions via L-Home APP Bluetooth wireless or NFC Lighting APP NFC.
- ठोका: Supports single click, double click, long press and rotation; supports setting three levels of sensitivity adjustment: high, medium and low.
- निर्देशक प्रकाश: The corresponding color is displayed according to the current adjustment value of the knob: white (BRT) and yellow (CT). The factory default color is white.
- फॅक्टरी सेटिंग्जवर पुनर्संचयित करा: Press and hold the knob for 15 seconds until the indicator light flashes slowly, then release it. Within 3 seconds, press the knob 3 times briefly, and the indicator light will flash quickly.
- Introduction to the use of the knob:
टीप: Different operations are available depending on the configuration type of the knob.
स्थापना चरण
- Turn off the main power switch, and confirm that there are no attachments such as cement on the inner wall of the 86 junction box. Trim the length of the power cord inside the junction box to about 10 cm. Use a flat-blade screwdriver to pry open the bottom box of the knob panel, and find the NFC marking point on the plastic part.
- Use your mobile phone to open the NFC Lighting APP, click [Read/Write Smart Device] on the ” Home Page”, bring the mobile phone sensing area close to the knob panel NFC identification point, read the knob panel parameters, set the parameters according to your needs (see P8 for details), click [Write] in the upper right corner, and then bring the mobile phone sensing area close to the knob panel NFC identification point, and you can directly write to the knob panel.
- See Figure 1, after using the mobile phone’s NFC to read and write parameters, connect the live wire to the L interface of the smart switch, and the neutral wire to the N interface, and confirm that the power cable is in good contact with the switch binding post and there is no exposed copper wire. (The circuit breaker rating should not exceed 35A) See Figure 2, fix the bottom box to the wall secret box with screws, so that the bottom box fits the wall.
- Tilt the panel and buckle it on the bottom box, turn on the power main gate, press the knob panel, and you can control the light normally, which means that the installation is correct.
कनेक्शन आकृती
- Wiring method for single E6A to control multiple drivers.
- 0-10V Bluetooth wireless connection method.
Please try to avoid wireless drivers being placed next to large areas of metal objects or in spaces with more metal media to avoid interference.
Use with NFC Lighting APP
- खाते नोंदणी करा
Scan and download the QR code through your mobile phone, and follow the prompts to complete the APP installation and log in/register. (Due to performance requirements, the phone model is required for Apple: iPhone 8 and above, and operating system iOS 13 and above; Android: NFC-functional model)
When setting the device parameters, the operation must be performed when the device is powered off. - Read/write knob panel
Click [Read/Write Smart Device] on the “Homepage” of the APP, and bring the phone’s sensing area close to the NFC marking point of the knob panel (Figure P4) to read the knob panel parameters.
- How to set control type and parameters
नियंत्रण प्रकार: Click “Control type” to select DIM/CT, default CT.
पॅरामीटर्स: Click “Parameter” to edit the knob sensitivity, indicator light, key press sound, scene key, powered on state and other advanced parameters.
- How to set knobs and scene keys
ठोका: Click “Knob Sensitivity” to select low/medium/high sensitivity; turn on/off indicator light, turn on by default; turn on/off key press sound, turn on by default.
Scene key: Press and hold the scene key to bind to execute actions.
- Power-on status and factory reset settings
पॉवर-ऑन स्थिती: You can choose to full bright/light is off/memorize/custom, default memorize.
कारखाना पुनर्संचयित करा: After clicking the “All parameters are restored to factory default” button, all parameters on the APP page will be restored to factory default value. At this time, you need to click the “Write” button to write the parameters to the device to restore the device to factory settings.
एल - होम अॅपसह वापरण्यासाठी.
खाते नोंदणी करा
तुमच्या मोबाईल फोनने खालील QR कोड स्कॅन करा. सूचनांनुसार APP इंस्टॉलेशन पूर्ण केल्यानंतर, तुम्ही लॉगिन/नोंदणी ऑपरेशन सुरू करू शकता.
पेअरिंग ऑपरेशन
For new users, after creating a home on the APP, click the “+” icon in the upper right corner on the [Room] interface for addition. Select “LED Controller” from the device addition list, and follow the prompts on the installation interface to complete the addition.
How to set knobs and scene keys
Click the added knob panel in the “room” interface to enter the [Control] interface.
ठोका: Support clicking the knob to enter the page to adjust the light.
Scene key: Each key supports binding different execution actions.
Binded by remote control
The knob panel can be bound to the B1/B2/B8/RC4-BLE remote control as a lamp;
Each partition of the remote control supports binding a knob panel;
After binding, the remote control area controls the load on the knob panel.
How to set scenes and automation
स्थानिक दृश्य: Select “Local scene” in the [Smart] interface and click “+” to create a local scene. Click Add Action and select the corresponding device type action.
Cloud scenario: Make sure that smart gateways have been added to the home, such as Super Panel 12S.
Select “Cloud Scene” in the [Smart] interface and click “+” to create a cloud scene. Click Add Action and select the corresponding device type action.
ऑटोमेशन: Ensure that smart gateways have been added to the home, such as the Super Panel 12S.
Select “Automation” in the [Smart] interface and click “+” to create automation. You can choose local/cloud execution method, as well as set trigger conditions and execute actions. When the set trigger conditions are met, a series of device actions are automatically triggered to achieve remote linkage.
फॅक्टरी सेटिंग्जवर पुनर्संचयित करा
पद्धत 1: After the E6A knob panel is connected to power, press the knob for 15 seconds (see Figure 1) until the indicator light flashes slowly and then releases. Press the knob for a short time 3 times within 3 seconds, and the indicator light flashes quickly, indicating that it has returned to the factory settings.
पद्धत 2: प्रथम, डिव्हाइस योग्यरित्या चालू आहे आणि ऑनलाइन स्थितीत आहे याची खात्री करा. नंतर, L – Home APP उघडा, डिव्हाइस शोधा आणि त्याचे सेटिंग्ज पृष्ठ प्रविष्ट करा. “डिव्हाइस हटवा” बटणावर क्लिक करा (आकृती 2 पहा). जेव्हा सिस्टम “डिलीट यशस्वी” असे प्रॉम्प्ट करते, तेव्हा याचा अर्थ असा की डिव्हाइस त्याच्या फॅक्टरी सेटिंग्जमध्ये यशस्वीरित्या पुनर्संचयित केले गेले आहे.
लक्ष
- उत्पादनाची स्थापना आणि कमिशनिंग योग्य व्यावसायिकाने केले पाहिजे.
- LTECH products are and not lightningproof or waterproof (special models excepted). Please avoid the sun and rain. When installed outdoors, please ensure they are mounted in a waterproof enclosure or in an area equipped with lightning protection devices.
- चांगले उष्णता नष्ट होणे उत्पादनांचे कार्य आयुष्य वाढवेल. कृपया चांगले वायुवीजन सुनिश्चित करा.
- कृपया कार्यरत व्हॉल्यूम आहे का ते तपासाtage वापरलेले उत्पादनांच्या पॅरामीटर आवश्यकतांचे पालन करते.
- The diameter of the wire used must be able to support the light fixtures you connect and ensure proper wiring.
- उत्पादने चालू करण्यापूर्वी, कृपया सर्व वायरिंग योग्य असल्याची खात्री करा.
- If a fault occurs, please do not attempt to fix the products by yourself. If you have any questions, please contact your suppliers.
हमी करार
- उत्पादनाच्या तारखेपासून वॉरंटी कालावधी: ५ वर्षे.
- वॉरंटी कालावधीत गुणवत्ता समस्यांसाठी मोफत दुरुस्ती किंवा बदली सेवा प्रदान केल्या जातात. वॉरंटी वगळणे खाली दिले आहे:
- The following conditions are not within the guarantee range of free repairing or replacement services:
- वॉरंटी कालावधीच्या पलीकडे.
- उच्च व्हॉल्यूममुळे होणारे कोणतेही कृत्रिम नुकसानtagई, ओव्हरलोड किंवा अयोग्य ऑपरेशन्स. गंभीर शारीरिक नुकसान असलेली उत्पादने.
- नैसर्गिक आपत्ती आणि जबरदस्तीमुळे होणारे नुकसान.
- वॉरंटी लेबल आणि बारकोड खराब झाले आहेत.
- No contract or invoice signed by LTECH .
- ग्राहकांसाठी दुरुस्ती किंवा बदली हा एकमेव उपाय आहे. कायद्याच्या चौकटीत नसल्यास कोणत्याही आकस्मिक किंवा परिणामी नुकसानीसाठी LTECH जबाबदार नाही.
- या वॉरंटीच्या अटींमध्ये सुधारणा करण्याचा किंवा त्यात बदल करण्याचा अधिकार LTECH ला आहे. लेखनात जारी केलेली वॉरंटी प्रचलित राहील.
हे मॅन्युअल पुढील सूचना न देता बदलांच्या अधीन आहे. उत्पादनाची कार्ये मालावर अवलंबून असतात. तुम्हाला काही प्रश्न असल्यास कृपया आमच्या अधिकृत वितरकांशी संपर्क साधा.
अपडेट वेळ: 2025.03.21_A0 17
वारंवार विचारले जाणारे प्रश्न
डिव्हाइस रिमोटली कसे नियंत्रित करावे?
आमच्या कंपनीच्या स्मार्ट गेटवेशी जोडल्यास, हे उपकरण मोबाईल फोनवर 4G/5G/WiFi द्वारे दूरस्थपणे नियंत्रित केले जाऊ शकते.
कागदपत्रे / संसाधने
 |
LTECH E6A Color Temperature Knob Panel [pdf] वापरकर्ता मॅन्युअल E6A Color Temperature Knob Panel, E6A, Color Temperature Knob Panel, Temperature Knob Panel, Knob Panel, Panel |