FXN Single Colour Panel
स्थापना मार्गदर्शक

स्थापना

उत्पादन

अॅक्सेसरीज आणि साधने

Gluing process (if needed)

1. The external terminal was not treated with waterproofing when shipped.
2. Prepare glue, syringes and other materials.
3. Apply glue to fully cover the terminal, and make sure there’s no bubbles or gaps. The glue should not cover the LEDs, resistors and other components;
4. Power on when the glue is completely dry.

स्थापना चरण

टीप:
“+” connect to white-red wire.
The above pictures are only for reference.
स्थापनेपूर्वी लक्ष द्या

• Before installation, check that the product parameters are consistent with the requirements (Seeing product specifications or product labels)
• लोड व्हॉल्यूमtage, current, power and power supply should be matched with the product.
• Follow the instructions of wiring diagram (first connect the load and then the power supply) to avoid short circuit.
• Make sure the correct connection of positive and negative poles between products and power supply. Otherwise, the light will not be on.
• Make sure the power cord firmly screwed into the terminal and it should not be pulled out by hands.
• The terminal should have insulation, waterproof and anti-corrosive treatment.

Common Faults and Troubleshoots

जलद मार्गदर्शक
समस्या	कारणे	उपाय
All LEDs can not light on.	No electric supply.	Fix the short circuitproblem.
	Automatic power protection from the open or short circuit in output of the power supply.
	Wrong connection of power supply.
LEDs can not light on partly.	Some switching mode power supplies are not powered.	Correctly connection
	Power supply line error.
	Mistaken wire connection of some products
एलईडीची चमक is inconsistent or insufficient	Power overloaded.	Replace with more powerful power
	Power supply circuit excessive consumption.	कार्यरत व्हॉल्यूमची खात्री कराtage of the product within ±5% of standard voltage, or keep balance by circuit power consumption.
	Excessive quantities in series connection of the product	Reduce the quantities of the product in series connection to meet requirement.
LED flicker.	Connection point fault.	Remove bad connection point.
	Switching power supply failure.	नवीन वीज पुरवठा बदला.
	Wrong Installation or use of products	कृपया सूचनांचे अनुसरण करा.

चेतावणी

• Do not disassemble or retrofit the light. Do not touch the surface of the light with a sharp object.
• Do not do live-line working during installation, especially for high voltagई उत्पादन.
• Do not use any organic chemicals solvents.
• Use neutral glass adhesive to fix this product and it needs to be dried 4 hours in the open environment after operation.
• Treat the ends and the circuit connection points that are not connected to the main line with insulation, waterproof, and anti-corrosion in the installation.
• Use 18AWG (0-75mm^2 cross-sectional area) or thicker core wire to avoid adverse consequences caused by overheating, if the power cable need to lengthen.
• इनपुट व्हॉल्यूमची खात्री कराtage meets the requirements and lines are connected correctly before lighting on.
• This product is for signage, and do not use as general lighting.
• Series connection with the max run.
• The length of the power cable between the power supply and the LED strip should not exceed 2 meters. Otherwise, large circuit loss will lead to inconsistent brightness.
• Installation, maintenance and repair should be operated by a qualified technician.

Statements and Recycling
विधाने:
Repair should be operated by a qualified technician, if the external circuit or main line of this product is damaged.
The parameters given in this manual are typical values and for reference only.
All illustrations and drawings in this manual are for reference.
This product is subject to change without notice.
पुनर्वापर:

• LED lighting products belongs to electronic products, please do recycling treatment according directives.

Instruction of single-sided lightbox

WWW.LEDCTRL.COM बद्दल
LED CTRL, 1/483 BALMAIN
LILYFIELD, NSW 2040, AUSTRALIA
तपशील बदलण्याच्या अधीन आहेत
WITHOUT NOTICE VISIT WWW.LEDCTRLCOM सर्वात वर्तमान तपशीलांसाठी.
LED CONTROL PTE LTD UEN 201923077G 2025 LEDCTAL ALL RIGHTS RESERVED.

कागदपत्रे / संसाधने

LED CTRL FXN Single Colour Panel [pdf] स्थापना मार्गदर्शक FXN, FXN Single Colour Panel, Single Colour Panel, Colour Panel

संदर्भ

• वापरकर्ता मॅन्युअल