HOPERF HPNI01 LoRa ट्रान्सीव्हर मॉड्यूल
HPNI01 चे सामान्य वर्णन
HPNI01 is an ultra-low-power, high-performance LoRa transceiver for various frequency of 868,915 MHz wireless applications.It is part of the SEMTECH RF product line, which includes complete transmitters, receivers and transceivers .The high integration of HPNI01 simplifies the peripheral materials needed in the system design. The sensitivity up to – 136 dBm which can optimize the link performance of applications. In addition, HPNI01 also supports Duty-Cycle operation mode, channel interception, high-precision RSSI, power-on reset, noise output and other more functions, which makes the application design more flexible thus to achieve product differentiation design. The working voltage of HPNI01 is 3.3V. When the sensitivity is reaching -136 dBm, it only consumes 12.5 mA current. Thisultra-low power mode can further reduce the power consumption of the chip.
वैशिष्ट्ये
- Frequency Range: 868，915MHz
- मॉड्यूलेशन: LoRa
- Data Rate: 0.018~37.5 kbps
- Sensitivity: -136 dBm , BW=125KHz, SF=12
- खंडtage श्रेणी: 1.8~3.3V
- Receiving Current: 12.5 mA @ BW=125KHz
- BW: Supports a maximum of 500 KHz
- Supports Ultra Low Power Receiving Mode
- Sleeping Current:1.5ua
- 4-wire SPI Interface
- Supports Full-automatic Independent Working Mode
अर्ज
- Automatic meter Reading
- Home Security&Building automation
- ISM Band Data Communication
- Industrial Monitoring & C
- Security System ntrolling
- रिमोट कंट्रोल ऍप्लिकेशन
- बुद्धिमान साधन
- पुरवठा साखळी आणि लॉजिस्टिक्स
- बुद्धिमान शेती
- स्मार्ट सिटी
- किरकोळ विक्री
- Asset Following
- स्मार्ट लाइटिंग सिस्टम
- स्मार्ट पार्किंग
- पर्यावरण निरीक्षण
- आरोग्य देखरेख
उत्पादन पिन
तक्ता १. HPNI1 ची मॉड्यूल पिन व्याख्या
| पिन क्रमांक | पिन नाव | वर्णन |
| 1 | ANT1 | Antenna Input &Output TX:14dbm |
| 2,4,15,16 | GND | डिजिटल ग्राउंड |
| 3 | ANT2 | Antenna Output TX:20dbm |
| 5 | VCC | खंडtagई 3.3 व्ही |
| 6 | DIO0 | Data Input & Output, Software Configuration |
| 7 | DIO1 | Data Input & Output, Software Configuration |
| 8 | DIO2 | Data Input & Output,Receiving Data Output |
| 9 | DIO3 | Data Input & Output, Software Configuration |
| 10 | रीसेट करा | Reset, Active Low |
| 11 | एस.के.के. | SPI clock Input |
| 12 | मिसो | SPI डेटा आउटपुट |
| 13 | मोसी | SPI डेटा इनपुट |
| 14 | एनएसएस | SPI slave Input |
इलेक्ट्रिकल पॅरामीटर्स
Testing conditions: Power supply 3.3V, temperature 25℃
| पॅरामीटर | प्रतीक | अटी | किमान | ठराविक मूल्य | कमाल | युनिट |
| पुरवठा खंडtage | VDD | 1.8 | 3.3 | 3.7 | V | |
| कार्यरत आहे
तापमान |
T | -40 | 85 | ℃ | ||
| वीज पुरवठा
खंडtage उतार |
1 | mV/us |
| पॅरामीटर | प्रतीक | अटी | किमान | कमाल | युनिट |
| पुरवठा खंडtage | VDD | -0.5 | 3.9 | V | |
| इंटरफेस
खंडtage |
VIN | -0.3 | 3.3 | V | |
| JunctionTemper
परिपक्वता |
TJ | -40 | 125 | ℃ | |
| स्टोरेज
तापमान |
टीएसटीजी | -50 | 150 | ℃ | |
| सोल्डरिंग
तापमान |
TSDR | कमीत कमी ३० वर्षे टिकते | 255 | ℃ | |
| ESD Level[2] | HBM | -2 | 2 | kV | |
| Latch Current | @ 85 ℃ | -100 | 100 | mA |
| पॅरामीटर | अटी | किमान | ठराविक मूल्य | कमाल | युनिट |
| वारंवारता सहिष्णुता | एचपीएनआय०१ | 868 | MHz | ||
| 915 | |||||
| ट्रान्समिटिंग पॉवर | एएनटी१ व्हीसीसी=३.३ व्ही | – | 13 | — | dBm |
| एएनटी१ व्हीसीसी=३.३ व्ही | – | 18 | |||
| वर्तमान प्रसारित करीत आहे | ८६८ मेगाहर्ट्झ एएनटी१ | – |
35 |
60 |
mA |
| ८६८ मेगाहर्ट्झ एएनटी१ | – |
120 |
140 |
||
|
८६८ मेगाहर्ट्झ एएनटी१ |
– |
35 |
60 |
||
|
८६८ मेगाहर्ट्झ एएनटी१ |
– |
120 |
140 |
||
| वर्तमान प्राप्त करत आहे | 868/915MHz | – | 12.5 | 18 | mA |
| रिसीव्हिंग सेन्सिटिव्हिटी (लोरा) SF12, BW 125KHz CR4/5 |
868/915MHz |
– |
-136 |
– |
dBm |
पुनरावृत्ती इतिहास
| आवृत्ती | तारीख अपडेट करा | सामग्री अद्यतनित करा |
| V1.0 | 2024.12.20 | प्रारंभिक प्रकाशन |
FCC विधान
- हे डिव्हाइस FCC नियमांच्या भाग 15 चे पालन करते. ऑपरेशन खालील दोन अटींच्या अधीन आहे:
- हे डिव्हाइस हानिकारक हस्तक्षेप करू शकत नाही.
- अवांछित ऑपरेशन होऊ शकणाऱ्या हस्तक्षेपासह, या डिव्हाइसने प्राप्त झालेला कोणताही हस्तक्षेप स्वीकारला पाहिजे.
- अनुपालनासाठी जबाबदार असलेल्या पक्षाने स्पष्टपणे मंजूर केलेले बदल किंवा बदल हे उपकरण चालविण्याचा वापरकर्त्याचा अधिकार रद्द करू शकतात.
Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- रिसिव्हिंग अँटेना पुनर्स्थित करा किंवा पुनर्स्थित करा.
- उपकरणे आणि रिसीव्हरमधील पृथक्करण वाढवा.
- रिसीव्हर कनेक्ट केलेल्या सर्किटपेक्षा वेगळ्या सर्किटवरील आउटलेटमध्ये उपकरणे कनेक्ट करा.
- मदतीसाठी डीलर किंवा अनुभवी रेडिओ/टीव्ही तंत्रज्ञांचा सल्ला घ्या.
सामान्य RF एक्सपोजर आवश्यकता पूर्ण करण्यासाठी डिव्हाइसचे मूल्यमापन केले गेले आहे. हे उपकरण रेडिएटर आणि तुमच्या शरीरात किमान 20 सेमी अंतर ठेवून स्थापित आणि ऑपरेट केले जावे.
The Module is designed to comply with the FCC statement. FCC ID is 2ASEO-
HPNI01. The host system using the Module should have a label indicating it contains the modular’s FCC ID: 2ASEO-HPNI01. This radio module must not installed to co-locate and operating simultaneously with other radios in host system additional testing and equipment authorization may be required to operating simultaneously with other radio. The Module and its antenna must not be co-located or operating in conjunction with any other transmitter or antenna within a host device.
The modular must be installed in the host that is assigned by Company name: Shenzhen HOPE Microelectronics Co., Ltd, Model no.: HPNI01. If other host types used would need further evaluation and possible C2PC if they are not significantly similar to the one tested The Module is designed for a compact PCB design. It should be installed and operated with host or other minimum distance of 20 centimeters between the radiator and your body.” To comply with FCC regulations limiting both maximum RF output power and human exposure to RF radiation, the maximum antenna gain including cable loss in a mobile-only exposure condition must not exceed 2.15 dBi in the 902.0 MHz to 928.0 MHz. The module uses an External Antenna interface and ping angle interface antenna, this antenna is sold with the module.
OEM इंटिग्रेटरला सूचना
The end user manual shall include all required regulatory information/warning as shown in this manual. The OEM integrator is responsible for testing their end product for any additional compliance requirements required with this module installed. If the final product contains circuits of other FCC PART 15 Subparts, the final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed. The intended use is generally not for the general public, it is generally for industry/commercial use. The connector is within the transmitter enclosure and can only be accessed by disassembly of the transmitter that is not normally required, the user has no access to the connector. Installation must be controlled. Installation requires special training.
हे डिव्हाइस FCC नियमांच्या भाग 15 चे पालन करते
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
ISED विधान
The Module is designed to comply with the ISED statement. ISED Certification Number is 24999-HPNI01. The host system using the Module should have a label indicating it contains the modular’s IC: 24999-HPNI01. This radio module must not installed to co-locate and operating simultaneously with other radios in host system additional testing and equipment authorization may be required to operating simultaneously with other radio. The Module and its antenna must not be co-located or operating in conjunction with any other transmitter or antenna within a host device.
या डिव्‍हाइसमध्‍ये परवाना-मुक्त ट्रान्समीटर/प्राप्तकर्ता(रे) आहेत जे इनोव्हेशन, सायन्स आणि इकॉनॉमिक डेव्हलपमेंट कॅनडाच्या परवाना-मुक्त RSS(चे) चे पालन करतात. ऑपरेशन खालील दोन अटींच्या अधीन आहे:
कमाल अँटेना वाढ (dBi मध्ये): 2.15 dBi
अँटेना प्रकार: बाह्य अँटेना
संपर्क माहिती
- Shenzhen HOPE Microelectronics Co., Ltd.
- Address: 30/F, Building 8, Zone C, Vanke Cloud City, Liuxin 4th Street, Xili, Nanshan, Shenzhen 518055, China
- दूरध्वनी: +86-755-82973805
- विक्री: sales@hoperf.com
- Webसाइट: www.hoperf.com
वारंवार विचारले जाणारे प्रश्न
- HPNI01 मॉड्यूलची कमाल RF आउटपुट पॉवर किती आहे?
HPNI01 मॉड्यूलची कमाल RF आउटपुट पॉवर 60dBm आहे. - HPNI01 मॉड्यूलमध्ये वापरला जाणारा अँटेना प्रकार कोणता आहे?
HPNI01 मॉड्यूल ऑपरेशनसाठी बाह्य अँटेना वापरतो.
कागदपत्रे / संसाधने
 |
HOPERF HPNI01 LoRa ट्रान्सीव्हर मॉड्यूल [pdf] मालकाचे मॅन्युअल 2ASEO-HPNI01, 2ASEOHPNI01, hpni01, HPNI01 LoRa ट्रान्सीव्हर मॉड्यूल, HPNI01, LoRa ट्रान्सीव्हर मॉड्यूल, ट्रान्सीव्हर मॉड्यूल, मॉड्यूल |