HLT31927 सुरक्षित किमी स्विच

"

तपशील:

• Model: HLT31927 Rev. 1.3
• Supports up to 4/8 Port KM presets
• Allows simultaneous operation of multiple computers with one
  set of USB peripherals
• High isolation between computers and peripherals

उत्पादन वापर सूचना:

स्थापना:

To install the HSL Secure KM Switch, follow these steps:

1. Connect the Smart-Card Reader, Audio cables, USB Cable, Mouse
   Cable, Display Cable, and Keyboard Cable.
2. Connect separate displays to each computer.
3. Connect the Keyboard and Mouse to the console ports.
4. Connect the computers to the computer/source ports.

Using the KM Switch:

कनेक्ट केलेल्या संगणकांमध्ये स्विच करण्यासाठी:

1. Move the mouse cursor across display borders to switch
   पीसी.
2. Utilize the single Keyboard and Mouse to interact with multiple
   संगणक

प्रीसेट सेट करणे:

To set presets for display alignment:

1. Find the preset corresponding to your display alignment.
2. Type the keyboard key sequence to activate the preset (a click
   sound confirms selection).
3. Restart the KM by disconnecting and reconnecting the
   शक्ती

वारंवार विचारले जाणारे प्रश्न:

Q: How many computers can be connected to the HSL Secure KM
स्विच करायचे?

A: The switch supports connecting multiple computers
एकाच वेळी

Q: Can I use different displays for each connected
संगणक?

A: Yes, you can directly connect separate displays to each
संगणक

"`

SECURE KM SWITCHES | USER MANUAL

मॉडेल:
SM20N-4 ­ Secure 2-Port KM Switch, PP 4.0 SM40N-4 ­ Secure 4-Port KM Switch, PP 4.0 SM80N-4 ­ Secure 8-port KM Switch, PP 4.0

HLT31927 रेव्ह. १.३

सामग्री सारणी

विभाग

1

2

सामग्री सारणी

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 HSL Secure KM Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installing the KM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Step 1 ­ Connect peripherals to the KM Console ports. . . . . . . . . . . . . . . . . . . . . . . .3 Step 2 ­ Connect computers to the KM Computer ports. . . . . . . . . . . . . . . . . . . . . .4 Step 3 ­ Power ON your system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Step 4 ­ Presets Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Step 5 ­ Select a predefined display layout (Preset) . . . . . . . . . . . . . . . . . . . . . . . . . . .7 4/8 Port KM Presets list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 2 Port KM Presets list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Step 6 ­ Reset to Factory Defaults. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Operating the KM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Front Panel Push-Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Smoothly switch between computers (Virtual Display Technology). . . . . . . . . .12 Keyboard shortcut options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

HSL Secure KM Switches User Manual

०६ ४०

सामग्री सारणी

विभाग

1

2

3

परिचय

HSL Secure KM Switch
Work simultaneously with multiple computers connected to multiple displays using one set of USB, keyboard and mouse peripherals.
Keyboard Mouse (KM) switch offered by HSL allows interacting with multiple computers in real-time while maintaining the highest isolation between computers and peripherals. Directly connect separate display(s) to each computer and securely share keyboard, mouse and USB devices through the KM.
Obviate the need for purchasing and installing dedicated, percomputer peripheral sets.
This guide instructs how to install, configure and operate a secure HSL KM switch.

HSL Secure KM Switches User Manual

2

सामग्री सारणी

विभाग

1

2

3

इन्स्टॉलेशन

केएम स्थापित करणे
सामान्य
· Verify that all peripherals and computers are turned off prior to connecting them to the product.
· The KM’s back panel is divided into Console Ports and Computer Ports sections.

· Connect peripherals which are due to be shared by the KM to the Console ports.
· Connect computers that require access to the shared peripherals to the Computer ports.

Step 1 ­ Connect peripherals to the KM Console ports
· Keyboard: Connect a USB keyboard to the corresponding KM console keyboard port.
· Mouse: Connect a USB mouse to the corresponding KM console mouse port.
· USB peripherals: Connect USB peripherals to the KM console fUSB port.
Note: authentication devices such as smartcard and biometric readers are enabled by default, other devices must be explicitly whitelisted ­ for further information please refer to the KM Administrator’s guide.
Note: 4 channel product illustrations shown throughout this manual are applicable to other KM models.

Smart-Card Reader

ऑडिओ

fUSB Cable Audio Cable Mouse Cable Display Cable Keyboard Cable

दाखवतो

कीबोर्ड

उंदीर

CONSOLE PORTS

Computers COMPUTER/SOURCE PORTS

HSL Secure KM Switches User Manual

3

सामग्री सारणी

विभाग

1

2

इन्स्टॉलेशन

Step 2 ­ Connect computers to the KM Computer ports
· Computer keyboard & mouse connection: Connect each computer to the KM keyboard & mouse computer port using a USB A to USB B cable. Connect the USB A end to the computer and the USB B end to KM.
· Computer USB peripherals: Connect each computer to the KM fUSB computer port using a USB A to USB B cable. Connect the USB A end to the computer and the USB B end to KM.
· Computer video connection: Directly connect a monitor to each computer. Multi-monitor computers require driver installation, currently available only for Windows ( ht t p s : // h i g h s e c l a b s . co m /d o w n l o a d s / k m – m u l t i display-drivers/).

PC #4
अत्यंत गुप्त
PC #3
गोपनीय

Move mouse to switch PCs
PC #2
प्रतिबंधित
PC #1
इंटरनेट

3
Multiple Sources

Note: 4 channel product illustrations shown throughout this manual are applicable to other KM models.

Single Keyboard & Mouse

SECURE KM SWITCH

HSL Secure KM Switches User Manual

4

सामग्री सारणी

विभाग

1

2

3

इन्स्टॉलेशन

Step 3 ­ Power ON your system
· Connect all peripherals and computers to the KM prior to powering it up. Power ON the KM by plugging it to the AC wall outlet. By default, after product power-up, the active channel will be computer #1, indicated by the applicable front panel push button LED lit.
Note: Power ON self-test: As the product powers-up it performs a self-test procedure. In case of self- test failure for any reason, including jammed buttons, the product will be Inoperable. Self-test failure will be indicated by abnormal LED behavior ­ for further information please refer to the KM setup guide.

HSL Secure KM Switches User Manual

5

सामग्री सारणी

विभाग

1

इन्स्टॉलेशन

Step 4 ­ Presets Configuration
· Presets reflect the layout and boarders of computer displays to the KM.
Presets allow: · Support of various display layouts. Align displays vertically (on top)
and Horizontally (along side). · Associate the mouse cursor with each computer based on its
respective display position. · Consider all displays as one absolute screen area to allow VDT. · Virtual Display Technology (VDT) – Switch control between PCs
by moving the mouse cursor across display boarders (all over the absolute screen area).

2

3

Preset #1 F11 | F1
Preset #2 (Default) F11 | F2
Absolute Mouse-Screen area

HSL Secure KM Switches User Manual

6

सामग्री सारणी

विभाग

1

2

3

इन्स्टॉलेशन

Step 5 ­ Select a predefined display layout (Preset)
· Load a preset to adjust the KM settings with the physical layout of your computer displays.
· Setting presets is accomplished by typing the keyboard key sequence L Ctrl | L Ctrl | F11 | Fx1 / x2 | x3 where x1,x2,x3 values may vary according to the selected preset of your choice.
Setting presets: 1. Find the preset that corresponds to your display alignment. 2. Type the keyboard key sequence to activate the preset (a rapid click-
sound is played once a new preset is selected). 3. Restart the KM by disconnecting and reconnecting the power. 4. For exampजर सर्व डिस्प्ले क्षैतिजरित्या संरेखित असतील तर, टाइप करा:
L Ctrl | L Ctrl | F11 | F2 this will load preset 1 | 2 | 3 | 4

टीप:
· Custom presets can be created using the HSL KM Configuration tool (described in detail in the KM Administrator guide).
· Multi-monitor computers require driver installation, currently available only for Windows (https://highseclabs.com/downloads/km-multi-displaydrivers/).

१ ३०० ६९३ ६५७

Preset #2 (Default)

HSL Secure KM Switches User Manual

7

सामग्री सारणी

विभाग

1

2

3

इन्स्टॉलेशन

4/8 Port KM Presets list

1 2 F11 | F1
3 4 F11 | F2 (Factory 1 2 3 4 Default)
1P 1S F11 | F3
3P 3S
1P 3P F11 | F4
1S 3S
F11 | F5 1 2 3P 3S
F11 | F6 1 2P 2S 4
F11 | F7 1P 1S 3 4
F11 | F8 1P 1S 3P 3S
F11 | F9 1 2 3
1 F11 | F10
2 3 4

1 F11 | 1 | 1 2
3
1 F11 | 1 | 2
०६ ४०
1 F11 | 1 | 3
०६ ४०
1 2 F11 | 1 | 4
3
1 2 F11 | 1 | 5
3
1 F11 | 1 | 6
2 3 4
1 F11 | 1 | 7
2 3 4
2 3 4 F11 | 1 | 8
1
1 2 F11 | 1 | 9
3P 3S
3P 3S F11 | 1 | 0
०६ ४०

1 3P F11 | 2 | 1
2 3S
3P 1 F11 | 2 | 2
3S 2
2 3 4 F11 | 2 | 3
1P 1S
1S F11 | 2 | 4
1P 2P 2S 3
1 F11 | 2 | 5
2

F11 | 2 | 6 1 2

1 2 F11 | 2 | 7
3

3 F11 | 2 | 8
०६ ४०

2

F11 | 2 | 9

3

1

2 F11 | 2 | 0 3
1

1P F11 | 3 | 1
1S 2S 2P 3

F11 | 3 | 2

(फॅक्टरी डीफॉल्ट)

१ २ ३ ४ ५ ६ ७ ८

(8-Port Only)

F11 | 3 | 3 5 6 7 8 (8-Port Only) 1 2 3 4

F11 | 3 | 4 1 2 3 4 5 (8-Port Only)

F11 | 3 | 5

०६ ४०

(8-Port Only) 1 2 3 4

F11 | 3 | 6 4 5 6 (8-Port Only) 1 2 3

F11 | 3 | 7 1P (8-Port Only) 1S 2 3 4 5

F11 | 3 | 8 1 2 3 4

(8-Port Only)

०६ ४०

F11 | 3 | 9 1 2 3 4 5 6 7 (8-Port Only)

F11 | 3 | 0

6 7 8

(8-Port Only) 1 2 3 4 5

Note: In the preset configurations, Gray indicates a single-display computer and Blue indicates a multi-display computer. P indicates primary display and S indicates secondary display in multi-display configurations.

HSL Secure KM Switches User Manual

8

सामग्री सारणी

विभाग

1

इन्स्टॉलेशन

2 Port KM Presets list
Note: Only Windows computers support multiple displays with the KM.

F11, 1, 1 F11, 1, 2

F11, F1 (Factory Default) F11, F2
F11, F3
F11, F4
F11, F5

०६ ४०
1 2 1P 1S 2P 2S 1P 2P 1S 2S
1 2P 2S

F11, F6 F11, F7 F11, F8 F11, F9 F11, F10

1P 1S 2
1P 1S 1S 2
1 2P 2S 2S
1P 1S 2P 2S 1
2P 2S

F11, 1, 3 F11, 1, 4 F11, 1, 5 F11, 1, 6

F11, 1, 7

2
1P 1S 2
2P 1
2S
1P 2
1S
2P 1P 1S 2S 1 2P 2S 1P 1S 2
2P 1 2S

3

F11, 1, 8 F11, 1, 9 F11, 1, 0 F11, 2, 1 F11, 2, 2 F11, 2, 3 F11, 2, 4

1 2S 2S 2P 2S
2P 2S 1 2S 2S
1P 1S 2P 2S 2S 2S
1P 1S 1S 1S 2P 2S
1P 1S 1S 1S 2
1P 1S 2 1S 1S
1P 1S 1S 2P 2S 1S

HSL Secure KM Switches User Manual

9

सामग्री सारणी

विभाग

1

2

3

इन्स्टॉलेशन

Step 6 ­ Reset to Factory Defaults
Reset to factory defaults clears the device settings and restores the device to its original configuration.
· System reset, clears behavioral characteristics such as mouse settings and display presets. Type { L CTRL | L CTRL | F11| r } key combination.
· Complete reset: clears all device settings and resets to factory defaults. From the Terminal menu select the “Reset to Factory Defaults” option (refer to terminal mode guide).

महत्त्वाच्या सूचना:

1. Always use the left control key (CTRL) unless otherwise specified.

2. Keyboard shortcut keys are to be pressed sequentially

3. Do not use the numeric keypad for toggling shortcuts unless otherwise specified.

4. ALL KEYBOARD SHORTCUTS REFER TO QWERTY KEYBOARDS. In case a nonqwerty keyboard is in use, keep using the QWERTY layout.

~ ! @# $%^& * ` 12345678

() ७

_ –

+ =

हटवा

घाला

घर

पृष्ठ UP

= / * Num
कुलूप

टॅब

QW E

R

T

YU

I

OP

{ [

} ]

|

Delete End

पृष्ठ खाली

२ –

कॅप्स

ASDFGH J K L

: ;

"`

प्रविष्ट करा

456+

Shift Ctrl Ctrl

Z

X

C

V

B

N

M

< ,

>

? /

Alt

Alt

शिफ्ट

é

Ctrl ç ê è

०६ ४०

3
प्रविष्ट करा
,

HSL Secure KM Switches User Manual

10

सामग्री सारणी

विभाग

1

2

3

ऑपरेशन

केएम चालवणे
फ्रंट पॅनल पुश-बटन्स
· Following power up, the default channel is #1. · Select any other channel by pressing the appropriate front panel
push button. · The mouse cursor will be positioned at the center of the selected
computer display. · The currently selected channel is indicated by the illumination of the
appropriate push-button.

HSL Secure KM Switches User Manual

11

सामग्री सारणी

विभाग

1

2

3

ऑपरेशन

संगणकांमध्ये सहजतेने स्विच करा (व्हर्च्युअल डिस्प्ले तंत्रज्ञान)

· Automatically switch control from one computer to another by dragging the mouse cursor over the computer’s display border.
· Shared peripherals (Keyboard, audio, USB) switch to the next computer without having to press any buttons once the mouse is passing the display border.

VDT मोड निष्क्रिय करण्यासाठी: L CTRL | L CTRL | F11 | b टाइप करून माउस मोड रिलेटिव्हमध्ये बदला.
VDT मोड पुन्हा सक्रिय करण्यासाठी: L CTRL | L CTRL | F11 | c टाइप करून माउस मोड Absolute मध्ये बदला.

संगणकांमध्ये स्विच करा:
· Press the front panel buttons to manually switch control from one computer to another.
· Use cursor navigation switching (VDT) to automatically switch between computers by dragging the mouse cursor over the computer’s display border. Once the mouse is passing the display border, shared peripherals (Keyboard, audio, USB) switch to the next computer without having to press any buttons.

Note: VDT is enabled by default.

PC #1

PC #2

Screen border Mouse cursor movement path

HSL Secure KM Switches User Manual

12

सामग्री सारणी

विभाग

1

2

3

ऑपरेशन

कीबोर्ड शॉर्टकट पर्याय

# Action Description 1 Toggle between mouse modes
2 Increase / Decrease mouse speed 3 Change presets (Example) 4 System Reset to factory defaults 5 Enter Terminal-Mode

Keyboard (Absolute) – L CTRL | L CTRL | F11 | c (Relative) – L CTRL | L CTRL | F11 | b (Increase) – L CTRL | L CTRL | F11 | + (Decrease) – L CTRL | L CTRL | F11 | L CTRL | L CTRL | F11 | F1 ­ F6 L CTRL | L CTRL | F11 | r L CTRL | R CTRL | t

HSL Secure KM Switches User Manual

13

Highseclabs.com
©2023 सर्व हक्क राखीव. HSL लोगो आणि उत्पादनांची नावे HighSecLabs Ltd (HSL) चे ट्रेडमार्क किंवा सेवा ट्रेडमार्क आहेत. इतर सर्व चिन्हे त्यांच्या संबंधित मालकांची मालमत्ता आहेत. केवळ प्रात्यक्षिक हेतूंसाठी प्रतिमा. या दस्तऐवजात HSL कॉर्पोरेशनची गोपनीय आणि/किंवा मालकीची माहिती असू शकते आणि तिची पावती किंवा ताबा हे पुनरुत्पादित करण्याचा, त्यातील सामग्री उघड करण्याचा किंवा ते वर्णन करू शकणारी कोणतीही वस्तू तयार करण्याचा किंवा विक्री करण्याचा कोणताही अधिकार देत नाही. एचएसएल कॉर्पोरेशनच्या विशिष्ट अधिकृततेशिवाय पुनरुत्पादन, प्रकटीकरण किंवा वापरास कठोरपणे प्रतिबंधित आहे.

कागदपत्रे / संसाधने

HighSecLabs HLT31927 Secure KM Switch [pdf] वापरकर्ता मॅन्युअल HLT31927 Rev. 1.3, HLT31927 Secure KM Switch, HLT31927, Secure KM Switch, KM Switch, Switch

संदर्भ

• वापरकर्ता मॅन्युअल