वापरकर्ता मॅन्युअल
—- S102&C200-F-TY —-

उत्पादन परिचय

तांत्रिक मापदंड

साहित्य	ABS&&zinc alloy	फिंगरप्रिंट क्षमता	50 पीसी	ॲप	TuyaSmart/Sm art Life
ऑपरेटिंग तापमान	-20º ∼ 55º	ओळखण्याची वेळ	≤0.5से	यूएसबी की	ऐच्छिक
कार्यरत आर्द्रता	10% ~ 85% आरएच	स्थिर प्रवाह	≤45uA	बॅटरी प्रकार	3 AAA (No. 7) alkaline बॅटरी
वापरकर्त्यांची संख्या	10 to 50 pcs are optional	डायनॅमिक प्रवाह	≤120m A	आपत्कालीन वीज पुरवठा	टाईप-सी

ऑपरेशन सूचना

1. No fingerprint is added at the factory, and any fingerprint can be unlocked.
2. Please pay attention to the light prompts of the smart lock. (A green indicator light means correct, and a red indicator light means wrong).

I. Initialize
Insert three AAA-sized alkaline batteries into the battery compartment on the rear panel. Subsequently, plug the connector of the rear panel into the socket of the front panel. Press and hold the Initialize button until the green LED remains steadily lit, indicating the lock has been initialized. After initialization, the device will be unpaired, and all programmed fingerprint templates will be erased.
(The lock is pre-initialized at the factory.)

II. Networking of devices

>Tip: This product is a Bluetooth smart cabinet lock. The App administrator is the final administrator of the lock. The owner of the Bluetooth smart cabinet lock must download the Smart Life App or the Tuya App for binding.

1. Please download and install the Smart Life App or Tuya Smart from the Apple Store or mobile app market.
2. स्थापना पूर्ण झाल्यानंतर, नोंदणी आणि लॉग इन करण्यासाठी सूचनांचे अनुसरण करा.
3. Users can also scan the following QR code to download and install the application:

https://smartapp.smart321.com/smartlife	https://smartapp.tuya.com/tuyasmart

III. Add Bluetooth lock
>To add a device to the app, touch the fingerprint to wake up the device before adding.

IV. Fingerprint Registration
Place your finger in the fingerprint area and read the same finger repeatedly (different angles) to complete the registration.

Special feature description

Illegal Fingerprint Alarm:
When a wrong fingerprint is detected, the red light will turn on.
कमी व्हॉलtagई अलार्म:
When the red indicator light flashes continuously for 3 seconds during unlocking, it indicates that the smart lock is in a low-voltage state. Please replace the battery in a timely manner.
आपत्कालीन अनलॉकिंग:
When the smart lock cannot be unlocked due to low power, you can use a 5V power bank to unlock the smart lock through the Type-C interface.

▶ Before installation, test whether the smart lock works properly
▶ Please scan the QR code on the right to watch the installation video

https://qr61.cn/o0un0S/qLTLnN9https://qr61.cn/o0un0S/qHtkNjZ

कागदपत्रे / संसाधने

Global Sources S102 Bluetooth Smart Cabinet Lock [pdf] वापरकर्ता मॅन्युअल S102-F, C200-F-TY, S102 Bluetooth Smart Cabinet Lock, S102, Bluetooth Smart Cabinet Lock, Smart Cabinet Lock, Cabinet Lock

संदर्भ

• वापरकर्ता मॅन्युअल