GEEKMAXI SYL-20 मोठा रिमोट कंट्रोल
तपशील
| नाव | तपशील | पॅरामीटर | |
| मोठा
नियंत्रण |
दूरस्थ | बॅटरी आकार | 402030 |
| मोठा
नियंत्रण |
दूरस्थ | कॅपेसिटिव्ह
क्षमता |
3.7V/150mA |
| मोठा
नियंत्रण |
दूरस्थ | चार्जिंग
मध्यांतर |
२० वर ५०% शुल्क
मिनिटे |
| मोठा
नियंत्रण |
दूरस्थ | यूएसबी | मायक्रो यूएसबी |
| मोठा
नियंत्रण |
दूरस्थ | गोफण | समर्थन |
| मोठा
नियंत्रण |
दूरस्थ | वजन | 50 ग्रॅम |
| मोठे नियंत्रण | दूरस्थ | संप्रेषण मोड | बहु-बिंदू
Frequency hop is 2.4 GHz |
| मोठा
नियंत्रण |
दूरस्थ | रिमोट कंट्रोल
अंतर |
रिकामे २० मीटर |
उत्पादन वापर सूचना
टीप: Ensure proper battery levels and avoid overdischarge to maintain remote control functionality.
मोठे रिमोट कंट्रोल सूचना पुस्तिका
- टिपा: Thank you for buying this product! The wrong operation may cause improper use or even damage to the relevant equipment. We strongly recommend that you read this manual carefully before using the equipment and strictly follow the prescribed operating procedures. We shall not assume any liability arising from the use of the product, including but not limited to liability for incidental or indirect losses, nor shall we assume any liability arising from unauthorised modification of the product. We have the right to change the product design, appearance, performance and use requirements without notice.
- टीप: the meaning of the short press button is: press the switch in about 1 second to open, the meaning of the long press button is: hold the button without releasing.
कार्य घोषणा
रिमोट कंट्रोल बूट:
Short-press the power button. Power1 indicator light is on, 2.3.4.5 indicator light flashes 3 sides after all out.
रिमोट कंट्रोल शटडाउन
Long-press the power button for 3 seconds, the 1 indicator is off, turned off.
Automatic remote control shutdown
Remote control without connected scooter, 30 seconds automatic shutdown, remote control and scooter are connected, will not automatically shut down, must wait for the scooter to shut down after no connected state for 30 seconds after the shutdown.
जुळणी पद्धत
First open the scooter power, long press 3 seconds scooter power button, scooter indicator flashing 0.5 seconds after once, the scooter into pairing mode, then open the remote control power, on the back of the remote control has a hidden button, using a long needle poke into the hole “matching button” poke a release, dont hold for a long time, short loosen, remote control 1 lamp flashing, scooter power indicator flashing, pairing success can be used. Note: the scooter’s power button is a long-press, and the remote control is a short-press.
Scooter battery quantity instruction
The remote control is successfully connected to the scooter, can be used, 2,3,4,5 indicator light indicates the power of the scooter, (2 light “100% -75%”), (light 3 “75% -50%”), (light 4 “50% -25%”) (light 5 light “25% -5%”) power lower than “10% -0%” indicator 5 light 0.5 seconds flashing,
Remote control power indication
- Within 3 seconds when the remote control is turned on, 2,3,4,5 lights flashing prompt remote control power, according to (light 2 "100% & 75% & quot 😉 (light 3 "75%
- 50%") (light 4 "50% -25%") (light 5 "25% -5%") power. Displays the remote control power; when the remote control power is below 20%, the number 6 indicator light flashes for 0.5 seconds.
Acceleration / Brake
- Push the " roller; forward to control the skateboard forward, and pull the " roller; backwards to control the skateboard brake.
- Push the ' wheel' forward to switch the speed gear, and pull the ' wheel' backwards to switch the brake force adjustment.
Scooter direction switch:
The scooter is in a static state, short press the Reverse button to switch the front and rear direction of the scooter, the forward direction of the skateboard no. 1 light shows green, then short press the Reverse button, the scooter to the rear no. 1 light shows red, in turn in the front and back direction.
स्कूटर स्पीड गियर स्विच
In scooter stationary state, or the scooter sliding state, short press Power button switch scooter four gear, a gear 5 lights long, two 4 lights long, three 3 lights long, four 2 long, successful exit after 3 seconds, note: in each gear and each light long, the other three lights is not bright, note: one is low gear, second gear is medium speed, three gear is high speed economy, four gear is sports players violence.
Scooter brake strength gear switch
Pull the remote control back to the “roller” and do not drive it away. At the same time, press the Power button to switch the four gears of the scooter, with one gear 5 lights flashing, the second gear 4 lights flashing, the third gear 3 lights flashing, and the fourth gear 2 lights flashing. Note: Other lights are not on when each gear and each light flash.
Remote charge
Remote control charging Micro USB, the remote control connected after charging, the remote control 2.3.4.5 indicator quickly flashes (similar to the walking light). All four lights long light means that the remote control power is full, when charging, the number 6 light long, the number 6 light is the charging indicator.
Remote control power protection
रिमोट कंट्रोलची शक्ती २०% पेक्षा कमी आहे, बॅटरी व्हॉल्यूम असताना क्रमांक ६ चा प्रकाश चमकत आहेtage 3.2V पेक्षा कमी आहे "रोलर" ढकलण्यास मनाई आहे, "फॉरवर्ड" रोलर ब्रेक सामान्य आहे, (फक्त ब्रेक पुढे नेऊ शकत नाही) रिमोट कंट्रोल पॉवर 1% व्हॉल्यूमपेक्षा कमी आहेtage 3.0V, रिमोट कंट्रोल आपोआप बंद होतो.
टीप: When the power of the remote control is less than 20%, and the 6th ndicator light is flashing, the user had better charge the remote control in time to avoid damage to the lithium battery due to overdischarge.
ड्रॉपआउट
When the signal is lost, if the remote control is in the acceleration state, the scooter stops accelerating, and the motor slides freely. When the scooter is braking, the brake is still valid within 1 second, reconnected within 1 second, and can continue to be used. If the sbe usedal is lost for more than 1 second, the brake will fail, and the skateboard will be equivalent to free sliding.
एफसीसी स्टेटमेंट
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used according to the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- रिसिव्हिंग अँटेना पुनर्स्थित करा किंवा पुनर्स्थित करा.
- Increase the separation between the eequipequipment andver.
- उपकरणे एका सर्किटवर आउटलेटमध्ये कनेक्ट करा ज्यावर रिसीव्हर c कनेक्ट केलेला आहे.
- मदतीसाठी डीलर किंवा अनुभवी रेडिओ/टीव्ही तंत्रज्ञांचा सल्ला घ्या.
- खबरदारी: निर्मात्याने स्पष्टपणे मंजूर न केलेले या डिव्हाइसमधील कोणतेही बदल किंवा बदल हे उपकरण चालवण्याचा तुमचा अधिकार रद्द करू शकतात.
हे डिव्हाइस FCC नियमांच्या भाग 15 चे पालन करते. ऑपरेशन खालील दोन अटींच्या अधीन आहे:
- हे डिव्हाइस हानीकारक हस्तक्षेप होऊ शकत नाही, आणि
- अवांछित ऑपरेशन होऊ शकणाऱ्या हस्तक्षेपासह, या डिव्हाइसने प्राप्त झालेला कोणताही हस्तक्षेप स्वीकारला पाहिजे.
हे उपकरण अनियंत्रित वातावरणासाठी निर्धारित केलेल्या FCC रेडिएशन एक्सपोजर मर्यादांचे पालन करते. हे उपकरण रेडिएटर आणि तुमच्या शरीरात किमान 0cm अंतर ठेवून स्थापित आणि ऑपरेट केले पाहिजे.
वारंवार विचारले जाणारे प्रश्न
Q: What should I do if the remote control’s power is low?
A: Charge the remote control promptly when the power is below 20% to prevent damage due to overdischarge.
प्रश्न: सिग्नल हरवल्यास रिमोट कंट्रोल कसे वागते?
A: If the signal is lost and the remote control is in acceleration mode, the scooter will stop.
कागदपत्रे / संसाधने
 |
GEEKMAXI SYL-20 मोठा रिमोट कंट्रोल [pdf] सूचना पुस्तिका 2A5R5SYL-20, 2A5R5SYL20, SYL-20 मोठा रिमोट कंट्रोल, SYL-20, मोठा रिमोट कंट्रोल, रिमोट कंट्रोल, नियंत्रण, रिमोट |