FUNLAB FF01 हॉल इफेक्ट कंट्रोलर

ओव्हरview

Firefly Pro Controller–Instruction Manual 

उत्पादन तपशील

श्रेणी	तपशील
मॉडेल	FF01
प्रसारण माध्यम	ब्लूटूथ 2.1
वाहक वारंवारता	2.402-2.480GHz
प्रोटोकॉल	ब्लूटूथ BT2.1+EDR
एलईडी	4 LEDs and Multiple Colored Lights
बॅटरी	एक पॉलिमर लिथियम बॅटरी 3.7V/950mAH
सहनशीलतेचा काळ	12.5 Hours (Lights Turned Off)
चार्जिंग वेळ	6.3 तास
कार्यरत खंडtage	3.7V-4.2V
वॉल्यूम चार्जिंगtage	5V
कार्यरत तापमान	-10 ° से 50. से
स्टोरेज तापमान	-20°c-10°c

कंट्रोलरचे चालू/बंद ऑपरेशन (स्विच मोड अंतर्गत)

वायर्ड कनेक्शन

वायरलेस कनेक्शन

1. होम मेनूमधून, कंट्रोलर्स निवडा, नंतर पकड आणि ऑर्डर बदला.
2. Press and hold Y + HOME for 3 seconds, and 4 LED lights flash quickly.
   The LED(s) are becoming stable, pairing finishes.
3. If no pairing for over 2.5 minutes, it shuts down by itself.
4. If paired and no operation for over 5 mins, shuts down by itself. (No movement on the sensor).

वेक अप फंक्शन: Press the Home Button, and then the console in the sleep state can be woken up and connected again.

ऑपरेशन पद्धत आणि एलईडी संकेत (कनेक्शन सूचना)

जोडणी मोड

• Combination Pairing: In the off state, press and hold the following key combination to enter the Pairing Mode.
• Android Mode: A+ HOME
  LED2 – LED3 पेअर करताना त्वरीत फ्लॅश, आणि LED2 – LED3 यशस्वीरित्या पेअर करताना चालू ठेवा;
• स्विच मोड: Y + होम
  LED1 – LED4 flash quickly while pairing, and the console automatically assigns when pairing is successful.
• PC Mode: B + HOME
  LED1 & LED4 flash quickly while pairing, and LEDl & LED4 keep on while pairing successfully;
• iOS Mode: B+ HOME
  पेअर करताना LED1 आणि LED4 त्वरीत फ्लॅश, आणि LED1 आणि LED4 यशस्वीरित्या पेअर करताना चालू ठेवा (सपोर्ट सिस्टम: iOS 13.6 किंवा वरील/iPadOS 13.6 किंवा वरील);
• Steam Deck Mode: Press the “STEAM” Button on the left side of the console – “Settings” -“Bluetooth” to connect
  बी+होम
• पेअर करताना LED1 आणि LED4 त्वरीत फ्लॅश, आणि LED1 आणि LED4 यशस्वीरित्या पेअर करत असताना चालू ठेवा.

टर्बो आणि ऑटो टर्बो फंक्शन

कोणत्याही मोडमध्ये

• बटणे टर्बो फंक्शनवर सेट केली जाऊ शकतात: A/B/X/Y/L/R/ZL/ZR/D-pad बटण
• (For the 1st time) Press the TURBO Button+ one of the function buttons to achieve the Manual TURBO Function (Press and hold to launch continuously)
• (For the 2nd time) Press the TURBO Button+ one of the function buttons to achieve the Automatic TURBO Function (Automatically continuous launch)
• (For the 3rd time) Press the TURBO Button+ one of the function buttons to clear the TURBO Function (Clear)
• टीप: Press and hold the TURBO Button for 5 seconds (if the Vibration intensity is not 0%, there will be a vibration cue ) to clear all TURBO Functions.

टर्बो गती समायोजन (3 स्तर)

• समायोजन पद्धती:
• Press TURBO Button+ “Shake L/R Joystick Up”, increase speed by 1 level;
• Press TURBO Button+ “Shake L/R Joystick Down “, reduce speed by 1 level;

गती पातळी:

1. सतत प्रति सेकंद 5 वेळा लॉन्च करा (स्तर 1);
2. सतत प्रति सेकंद 12 वेळा लॉन्च करा (स्तर 2);
3. सतत प्रति सेकंद 20 वेळा लॉन्च करा (स्तर 3);

कंपन समायोजन कार्य

• Press the Motor Vibration Button on the back of the controller, and you can adjust the Motor Vibration Intensity. Vibration Intensity can be cycled in turn. There are 5 intensities, 100%, 75%, 50%, 25% and 0%.

कंट्रोलर हार्डवेअर रीसेट करा

• There is a small hole on the back of the controller, and it is the Reset Button. After pressing it, the controller hardware will reset.

कंट्रोलरचे रीकनेक्शन

• When the controller is pairing to the previous device, you only need to press the HOME Button after the controller is in standby, and it will pair to the previous device.

चार्जिंग इंडिकेटर

• Charging in the OFF State: LED4 flashes slowly, and then turns off while being fully charged;
• स्विचशी कनेक्ट केलेले असताना चार्जिंग: संबंधित चॅनेल प्रकाश(चे) हळू हळू ब्लिंक होतील आणि नंतर पूर्ण चार्ज होत असताना चालू ठेवा.

Lighting Control Instruction (Light Button)

1. Light up the luminous pattern: Press the बटण
2. Change the Light Color: Press, बटण
   Colors will change each time you press the बटण
3. Change the Lighting Mode: Hold the, Initial Mode: Always-on
   1st time-click: breathing light mode
   2nd time-click: quick flash mode
   3rd time-click: vibration lighting mode
   Back to Always-on: turn off and then turn on the light.
4. Turn OFF the light: Hold 5 सेकंदांसाठी बटण.
   Turn ON the light: Press बटण

मागच्या बटणावर मॅक्रो आणि मॅपिंग फंक्शन

मॅक्रो फंक्शन-मॅक्रो बटणे

• Press and hold the MR Button and don’t loosen (4 LED lights turn on, entering programming), inputting the buttons you want to edit (up to 24 steps). The controller will have the vibration cue after loosening the MR Button and then pressing the XR Button to trigger the Macro Buttons.
• Press and hold the ML Button and don’t loosen (4 LED lights turn on, entering programming), inputting the buttons you want to edit (up to 24 steps). The controller will have the vibration cue after loosening the ML Button and then pressing the XL Button to trigger the Macro Buttons. Buttons that Macro Function could edit are A/B/X/Y/L/R/ZL/ZR/+/-/D-pad Buttons and L/Rjoysti cks (can be used as a combo in the game).

मॅपिंग फंक्शन-प्रोग्राम करण्यायोग्य बटणे

• Press and hold the MR Button and don’t loosen (4 LED lights turn on, entering programming), inputting the single button you want to map. The controller will have the vibration cue after loosening the MR Button and then pressing the XR Button to trigger the Programmable Buttons.
• Press and hold the MR Button and don’t loosen (4 LED lights turn on, entering programming), inputting the single button you want to map. The controller will have the vibration cue after loosening ML Button, and then pressing XL Button to trigger Programmable Buttons; and Buttons that Map ping Function could edit are A/B/X/Y/L/R/ZL/ZR/+/-/D-pad Buttons L/Rjoysti cks.

टीप:

1. मेमरी फंक्शनसह;
2. Press the MR/ML Buttons that set programming, and there is a vibration cue, and then you can clear the Macro and Mapping Function of the XR/XL Buttons.

Keylinker APP Instructions

1. Open the app store and search for “Keylinker” to download the APP.
2. Open the Bluetooth connection handle.
3. APP KEYLINKER BLE appears, click, and connect successfully.
4. Click the settings icon on the right to enter the settings page.
5. You can change the Button in the APP, set the lights, adjust the vibration, etc

सपोर्ट

• We promise to provide sustainable services for this controller. You can get more operational guidance support from our service channel and official web:
• Webसाइट: www.funlabswitch.com
• इंसtagram: funlab_official
• सेवा: support@funlabswitch.com
• मतभेद:

कागदपत्रे / संसाधने

FUNLAB FF01 हॉल इफेक्ट कंट्रोलर [pdf] सूचना पुस्तिका FF01, FF01 हॉल इफेक्ट कंट्रोलर, हॉल इफेक्ट कंट्रोलर, इफेक्ट कंट्रोलर, कंट्रोलर

संदर्भ

• वापरकर्ता मॅन्युअल