FlySpark-logo

FlySpark F4 V1 Stack Flight Controller

FlySpark-F4-V1-Stack-Flight-Controller-productतपशील

  • उत्पादनाचे नाव:
    फ्लायस्पार्क एफ४ व्ही१ बीएलएस ६०ए स्टॅक
  • AI वैशिष्ट्ये:
    Sensor Fusion, PID Autotuning, Adaptive Filtering
  • सॉफ्टवेअर समर्थन:
    बीटाफ्लाइट, आयएनएव्ही, अर्दुपायलट, ईएमयू-फ्लाइट, स्कायब्रश
  • ESC Communication:
    BLHeli_S ब्लूटूथ आणि USB-C
  • कनेक्टिव्हिटी:
    3-6S लीपो
  • परिमाण:
    47.8mm(L) x 47.5mm(W) x 18.3mm(H)
  • माउंटिंग:
    30.5 मिमी भोक आकारासह 30.5 x 4 मिमी
  • वजन:
    34 ग्रॅम

FlySpark-F4-V1-Stack-Flight-Controller-fig-9 FlySpark-F4-V1-Stack-Flight-Controller-fig-10

उत्पादन वापर सूचना

फ्लायस्पार्क F4 V1 फ्लाइट कंट्रोलर

मांडणी:
Refer to the user manual for the layout of the flight controller.

परिधीय कनेक्शन:
Connect peripherals as per the provided diagram.

अ‍ॅप आणि एफसी कॉन्फिगरेशन:
Use the recommended apps and follow the configuration instructions.

एफसी फर्मवेअर अपडेट:
Connect the flight controller to a PC via USB for firmware updates.

फ्लायस्पार्क बीएलएस ६०ए ४-इन-१ ईएससी

मांडणी:
Check the layout guide in the manual for proper installation.

मोटर्स आणि पॉवर केबलसह कनेक्शन:
Connect motors and power cables securely.

ESC कॉन्फिगरेशन:
Use the FlySpark app for ESC configuration settings.

ESC फर्मवेअर अपडेट:
Follow the provided steps to update the firmware for ESC.

फ्लायस्पार्क एफ४ व्ही१ बीएलएस ६०ए स्टॅकFlySpark-F4-V1-Stack-Flight-Controller-fig-1

चष्मा संपलाviewFlySpark-F4-V1-Stack-Flight-Controller-fig-20

FlySpark-F4-V1-Stack-Flight-Controller-fig-2 FlySpark-F4-V1-Stack-Flight-Controller-fig-3

पॅकेजFlySpark-F4-V1-Stack-Flight-Controller-fig-4.1

  • FlySpark F4 V1 Flight Controller x 1
  • FlySpark BLS 60A 4-in-1 ESC x 1
  • 35V 1000uF कमी ESR कॅपेसिटर x 1
  • M3 नायलॉन नट x 4
  • SH 1.0mm 25mm-लांबीची 8pin केबल (FC-ESC कनेक्शनसाठी) x 1 SH 1.0mm 75mm-लांबीची 6pin केबल* x 1
  • M3*30mm इनर-षटकोनी स्क्रू x 4
  • DJI 6pin केबल(80mm) x 1
  • XT60 पॉवर केबल(100mm) x 1

FlySpark-F4-V1-Stack-Flight-Controller-fig-5.2

एफसी कनेक्शन आकृतीFlySpark-F4-V1-Stack-Flight-Controller-fig-6

FC आणि ESC कनेक्शनसाठी मार्गदर्शक

पद्धत 1:

  • Using 8.Pin JST CableFlySpark-F4-V1-Stack-Flight-Controller-fig-7

पद्धत 2:

डायरेक्ट सोल्डरिंग

  • खाली दिलेल्या पॅडच्या व्याख्यांनुसार, प्रत्येक टोकावरील ८ पॅडवर ८ वायर सोल्डर करा.FlySpark-F4-V1-Stack-Flight-Controller-fig-8

फ्लाइट कंट्रोलरची वैशिष्ट्ये

FlySpark-F4-V1-Stack-Flight-Controller-fig-11.2

  • O6 एअर युनिटसह 3-पिन केबल वापरा FlySpark-F4-V1-Stack-Flight-Controller-fig-12.1
  • फ्लायस्पार्क F6 V4 BLS 1A स्टॅकसह 60-पिन केबल वापरा

FlySpark-F4-V1-Stack-Flight-Controller-fig-13

F C Firmware  update
To update the firmware for your FlySpark F4 VI flight controller, please follow these steps:
Connect the Flight Controller to Your PC:

  • Use a USB cable to connect the FlySpark F4 VI flight controller to your PC

Open Betaflight I INAV Configurator.

  • . Launch the Betaflight Configurator or INAV Configurator on your PC. For this guide, we’ll use Betaflight Configurator as an exampले

Navigate to Firmware Flashing:

  • In the Betaflight Configurator, navigate to the ‘Firmware Flashing’ page.

Select Target and Flash Firmware:

  •  Choose the target firmware for ‘Flyspark F4 VI’ from the dropdown menu.
  • Initiate the firmware flashing process.

टीप:
The Flyspark F4 VI flight controller does not support wireless firmware flashing. It must be  performed using a USB connection to your PC.

FlySpark-F4-V1-Stack-Flight-Controller-fig-14

Flyspark BLS 60A 4-in-l ESCFlySpark-F4-V1-Stack-Flight-Controller-fig-15

मोटर्स आणि पॉवर केबलसह कनेक्शनFlySpark-F4-V1-Stack-Flight-Controller-fig-16

ESC Specs FlySpark F4 V1 BLS 60A StackFlySpark-F4-V1-Stack-Flight-Controller-fig-17

ESC फर्मवेअर अपडेट
हे ८-बिट ५०A ESC BLHeliS फर्मवेअरसह प्री-लोडेड आहे परंतु ते ब्लूजे फर्मवेअरवर देखील फ्लॅश केले जाऊ शकते, जे RPM फिल्टरिंग आणि बाय-डायरेक्शनल Dshot सपोर्ट देते. फर्मवेअर अपडेट करण्यासाठी या चरणांचे अनुसरण करा:

  1. Prepare Your Drone:
    Remove all propellers from your drone for safety.
  2. Connect ESC to Flight Controller:
    Ensure the flight controller is properly connected to the ESC, then power up the drone. This step ensures the ESC initializes correctly.
  3. पीसीशी कनेक्ट करा:
    Use a USB Type-C cable to connect the flight controller to your computer.
  4. Access Firmware Configuration:
    Open the Chrome browser and visit: www.esc-configurator.com
  5. Flashing Steps:
    Follow the firmware flashing steps displayed on the configurator website. Ensure you select the appropriate options for flashing to Bluejay firmware.

FlySpark-F4-V1-Stack-Flight-Controller-fig-21

चेतावणी:FlySpark-F4-V1-Stack-Flight-Controller-fig-19

  • PROPELLERS OFF: REMOVE ALL PROPELLERS.
  • SECURE CONNECTION: ENSURE SECURE ESC CONNECTION.
  • FOLLOW STEPS: FOLLOW FLASHING INSTRUCTIONS CAREFULLY.
  • STABLE POWER: ENSURE STABLE POWER SUPPLY.
  • www.FlySpark.in

वारंवार विचारले जाणारे प्रश्न

मी ESC फर्मवेअर कसे अपडेट करू?

To update the ESC firmware, follow these steps: 1. Prepare Your Drone: Remove all propellers for safety. 2. Connect ESC to Flight Controller: Ensure proper connection to the ESC and power up.

कागदपत्रे / संसाधने

FlySpark F4 V1 Stack Flight Controller [pdf] वापरकर्ता मॅन्युअल
F4 V1, BLS 60A, F4 V1 Stack Flight Controller, F4 V1, Stack Flight Controller, Flight Controller, Controller

संदर्भ

एक टिप्पणी द्या

तुमचा ईमेल पत्ता प्रकाशित केला जाणार नाही. आवश्यक फील्ड चिन्हांकित आहेत *