eMastiff TH03Z तापमान आणि आर्द्रता सेन्सर

तपशील

• Product name: Temperature and Humidity Sensor
• बॅटरी प्रकार: CR2450
• Temperature detection range: 0°C to 95°C
• Temperature detection accuracy: Not specified
• Humidity detection range: 0% to 95% RH (no condensation)
• Humidity detection accuracy: Not specified
• वायरलेस प्रोटोकॉल: Zigbee 3.0
• उत्पादन आकार: 40 * 13 मिमी

*कृपया उत्पादन वापरण्यापूर्वी सूचना पुस्तिका काळजीपूर्वक वाचा.*

उत्पादन माहिती

The temperature and humidity sensor can detect the temperature and humidity in the environment in real time, and combine with other devices to implement intelligent application scenarios.

वापरासाठी तयारी

1. Download and install the Smart Life App on your phone and register an account.
2. Ensure your phone is connected to a 2.4GHz Wi-Fi network and Bluetooth is enabled.
3. झिग्बी गेटवेला स्मार्ट लाईफ अॅपशी जोडा.
4. Ensure the product is within the effective coverage of the gateway Zigbee network for connection.

पॅकिंग यादी

• सेन्सर एक्स १
• वापरकर्ता पुस्तिका एक्स 1
• पिन X १ रीसेट करा

स्मार्ट लाइफ ॲप
Before device binding operation, please install “Smart Life” APP on your phone and register account via email address. The App can be download by scanning QR code or from Google Play or App store. Ensure that your phone is connected with local WIFI 2.4GHz, Network and Bluetooth is enabled and have binded the Zigbee gateway to the APP.

प्रमुख वैशिष्ट्ये

1. Accurate Measurement – Measures temperature and humidity with high precision.
2. Zigbee Compatible – Works with Zigbee-enabled smart home systems.
3. Battery Powered – Uses a standard CR2450 battery (not included).
4. Compact Design – Small and lightweight for easy placement.
5. Real-Time Monitoring – Updates readings based on environmental changes.
6. Low Power Consumption – Efficient for long battery life.
7. Wide Measurement Range – Suitable for indoor use in homes or offices.
8. Stable and Reliable – Minimal drift in readings over time.
9. Easy Integration – Connects to Zigbee gateway for smart home automation.
10. Alerts & Notifications – Can trigger alerts for specific temperature or humidity thresholds (through connected gateway).

नेटवर्क ऍक्सेस सेटिंग

1. डिव्हाइसमध्ये बॅटरी घाला.
2. Access the Zigbee Gateway page in the Smart Life App and click “Add subdevice”.
3. Use the reset pin to insert into the reset hole for more than 5 seconds until the indicator flashes.
4. The app will automatically search for Zigbee devices and add them.
5. If the search takes more than 2 minutes, exit from matching and try again.

यशस्वीरित्या जोडल्यानंतर, तुम्हाला "माझे घर" यादीमध्ये डिव्हाइस सापडेल. जर झिग्बी गेटवे "शोध डिव्हाइस" २ मिनिटांपेक्षा जास्त वेळ लागला, तर जुळणीतून बाहेर पडेल. आपण गेटवेमधून बाहेर पडू शकतो आणि पुन्हा ऑपरेट करण्यासाठी त्यात प्रवेश करू शकतो.

वापर तपशील

1. Battery Installation – Open the battery compartment and insert a CR2450 battery, ensuring correct polarity.
2. Connecting to Zigbee Gateway – Add the sensor to your Zigbee hub or gateway according to the hub’s instructions.
3. Placement – Place the sensor in a location free from direct sunlight, water, or heating/cooling vents.
4. Temperature & Humidity Updates – Sensor uploads data when temperature changes by 0.3°C or humidity changes by 6%.
5. देखरेख – View current readings through your Zigbee-enabled app or smart home system.
6. Alerts Setup – Configure notifications for specific temperature or humidity ranges via the gateway app.
7. Battery Replacement – Replace the CR2450 battery when low-battery alerts are triggered.
8. Maintenance – Wipe the sensor gently with a dry cloth; avoid water or cleaning solutions.
9. Troubleshooting – Reset the sensor if it fails to connect or stops updating readings.
10. Compatibility Note – Cannot operate independently; must be paired with a Zigbee hub.

वारंवार विचारले जाणारे प्रश्न

Does the Zigbee temperature and humidity detector include a battery?

No, the detector does not include a battery. It requires a CR2450 battery.

Can the product be used alone or connected to WiFi separately?

No, Zigbee detectors cannot be used alone and cannot be connected to WiFi separately. They must be used together with a Zigbee gateway.

How often are temperature and humidity readings updated?

A change in temperature of 0.3°C or a change in humidity of 6% will trigger an upload. Under constant conditions, data is uploaded every 5 minutes.

How do I reset the temperature and humidity sensor?

Use the reset pin provided with the product. Insert it into the reset hole for more than 5 seconds until the indicator flashes.

What should I do if the device is not connecting to the Zigbee gateway?

Ensure the product is within the effective coverage of the gateway Zigbee network. If connection issues persist, try resetting the device and re-adding it to the network.

कागदपत्रे / संसाधने

eMastiff TH03Z तापमान आणि आर्द्रता सेन्सर [pdf] वापरकर्ता मॅन्युअल TH03Z तापमान आणि आर्द्रता सेन्सर, TH03Z, तापमान आणि आर्द्रता सेन्सर, आर्द्रता सेन्सर, सेन्सर

संदर्भ

• वापरकर्ता मॅन्युअल