सामग्री
लपवा
एलिटेक IPT-100, IPT-100S तापमान आणि आर्द्रता डेटा लॉगर
सुरक्षितता सूचना
- To ensure proper installation and usage of this product, please read carefully and follow the guidelines below:
बॅटरी
- Use three AAA batteries. Do not use other types of batteries to avoid damaging the device or causing other malfunctions.
- Do not disassemble, crush, strike, or heat the batteries. Do not place them in fire, as this may cause the batteries to explode and trigger a fire.
साधन
- Do not use the device in flammable or explosive gas environments to avoid the risk of explosion or fire.
- lf the device emits a burnt smell or other unusual odors, disconnect the power and contact the manufacturer or supplier immediately.
सावधगिरी
- If the device will not be used for an extended period, remove the batteries and store the device in a dry, cool environment.
- Users are not allowed to make any unauthorized changes to the device.
- Unauthorized modifications may affect the accuracy of the device or even cause damage.
- Do not use the device outdoors to avoid malfunctions caused by rain, lightning, or other adverse weather conditions.
- डिव्हाइसचा वापर त्याच्या नियुक्त तापमान आणि आर्द्रतेच्या मर्यादेत करा.
- Do not subject the product to heavy impact.
- मापन मूल्यांवर खालील घटकांचा परिणाम होऊ शकतो:
- तापमान त्रुटी:
- मापन वातावरणात स्थिरीकरणाचा पुरेसा वेळ नाही.
Proximity to heat or cold sources or direct exposure to sunlight.
- मापन वातावरणात स्थिरीकरणाचा पुरेसा वेळ नाही.
- आर्द्रतेतील त्रुटी:
- Insufficient stabilization time in the measurement environment.Long-term exposure to steam, mist, water curtains, or condensation environments.
- दूषित होणे:
वातावरणात धूळ किंवा इतर प्रदूषकांची उपस्थिती.
उत्पादन संपलेview
- The temperature and humidity meter is designed for industrial workshops, warehousespharmacies, laboratories, agricultural environments, and other professional settings for monitoring environmental temperature and humidity.
उत्पादन वैशिष्ट्ये
- Supports OTA updates for continuous improvements.
- डेटा असू शकतो viewed and traced through the mobile app for easier tracking.
- Scenario-based configuration with smart alerts.
- 4-inch large screen for clear data display.
उत्पादन देखावा
- कमाल/किमान बटण
- ℃/℉ toggle button
- मोड/ब्लूटूथ बटण
- बाह्य प्रोब इंटरफेस
- चुंबक
- बॅटरी कव्हर
- उभे राहा
- बाह्य तापमान सेन्सर (IPT-100S साठी मानक)
उत्पादन इंटरफेस
- बॅटरी पातळी चिन्ह
- ब्लूटूथ चिन्ह
- Placeholder icon (no function)
- गजर चिन्ह
- रेकॉर्डिंग डिस्प्ले आयकॉन
- बाह्य प्रोब डिस्प्ले मोड
- कमाल/किमान सूचक आयकन
- वेळ प्रदर्शन क्षेत्र
- बॅकट्रॅक तापमान प्रदर्शन क्षेत्र
- बॅकट्रॅक वेळ सूचक क्षेत्र
- तापमान प्रदर्शन क्षेत्र
- Over-limit status display (over upper limit
, over lower limit
- आर्द्रता श्रेणी निर्देशक क्षेत्र
- आर्द्रता प्रदर्शन क्षेत्र
तांत्रिक मापदंड
|
मापन श्रेणी |
तापमान:-10°C~50°C |
| आर्द्रता: १०% आरएच~९९% आरएच | |
|
अचूकता |
Temperature:+0.5°C(10-35°C),+1°C for other ranges |
| Humidity: +5%RH(40%-75%),+10% for other ranges | |
|
ठराव |
तापमान: 0.1°C |
| आर्द्रता: 0.1% RH | |
| वीज पुरवठा | 3*AAA |
| स्टँडबाय वेळ | Not less than 6 months |
| पडदा | ४.५-इंच सेग्मेंटेड डिस्प्ले |
| डेटा रेकॉर्डिंग | Not less than 5000 entries |
| ब्लूटूथ श्रेणी | Up to 30 meters in an open environment |
| ऑपरेटिंग वातावरण | -२०~६०℃, ०~९५% आरएच (नॉन-कंडेन्सिंग) |
| स्टोरेज वातावरण | -२०~६०℃, ०~९५% आरएच (नॉन-कंडेन्सिंग) |
| परिमाण | 118.6*99.5*23.0 मिमी |
Accessories External Probe
- (केवळ बिल्ट-इन बाह्य प्रोब असलेल्या IPT-100S ला लागू)
मापन श्रेणी Temperature:-20°C~70℃ अचूकता Temperature:+0.5°C(0℃~40°℃),+1°C for other ranges ठराव तापमान: 0.1 ℃ इंटरफेस प्रकार Type-C port (Note: This port does not support charging!) ऑपरेटिंग वातावरण -२०~६०℃, ०~९५% आरएच (नॉन-कंडेन्सिंग) स्टोरेज वातावरण -२०~६०℃, ०~९५% आरएच (नॉन-कंडेन्सिंग) सेन्सर प्रकार डिजिटल तापमान सेन्सर रेषेची लांबी 2 मीटर
उत्पादन वैशिष्ट्ये
- उत्पादन सक्रियकरण
- Remove the insulating strip from the back of the product to power it on. The screen will display all data for 2 seconds and then show the real-time readings from the internal sensor.
- Note: After powering on, connect the device to your phone via Bluetooth to sync the time. If not in use for a long period, remove the batteries and store them separately.
- The Type-C interface is only for connecting the external probe, not for charging.
- .Button Functions:
बटण
लहान दाबा
2s लांब दाबा
Switch between max, min, and current values Clear maximum and minimum values 
बॅकट्रॅक वेळ टॉगल करा तापमान युनिट स्विच करा (°C/°F) 
Switch between internal/external probe data displayब्लूटूथ सक्षम / अक्षम करा - मोड स्विचिंग:
Press the mode button to switch between the internal sensor’s temperature and humidity data and the external probe’s temperature data.- टीप: जर कोणताही बाह्य प्रोब कनेक्ट केलेला नसेल, तर बाह्य प्रोब मोड "—" दर्शवेल आणि बाह्य प्रोब आयकॉन उजळेल.
- View Max/Min Values:
short Press the max/min button to cycle between the maximum, minimum, and current values in the current mode.- Long-press the button to reset the maximum and minimum values.
- Humidity Indicator:
- By default, when the humidity is below 40%, the indicator turns red to show dry conditions. Between 40%-60%, it turns green to show comfortable conditions, and above 60%, it turns blue to show humid conditions. The app allows customization of these ranges.
- Note: Default values are based on the “Indoor Air Quality Standard” (GB/T 18883-2022)
- Product Alarms
डिस्प्ले
कारण उपाय बीप Current data exceeds the limit Automatic mute after 60 seconds, or press any key to mute 
Current data exceeds मर्यादा
Automatically cancels when data सामान्य परत येतो
Exceeded the upper limit of the display range Automatically cancels when data returns to normal 
Exceeded the lower limit of the display range सेन्सर आढळला नाही
Automatically cancels when data returns to normal Insert or replace the sensor
APP ऑपरेशन सूचना
APP कनेक्शन
- Scan the QR code below to download and install the dedicated APP, or search for “Elitech Tools” in the app store to install.
- दीर्घकाळ दाबा Bluetooth button for 2 seconds to enable Bluetooth. The Bluetooth icon will flash. Open the “Elitech Tools” app, search for nearby devices, find the correct model, and click to connect.
-
- Note: Ensure your phone’s Bluetooth is enabled while using the app. The device’s Bluetooth will automatically turn off if not connected within 2 minutes.
APP इंटरफेस परिचय
- The main interface displays the current built-in temperature, humidity, probe temperature, and max/min value. By clicking
, you can reset the max/min values. When the temperature or humidity exceeds the upper or lower alarm limits, the alarm icon will appear in the corresponding alarm zone
- सीन मोड स्विच करण्यासाठी वरच्या उजव्या कोपऱ्यातील मजकुरावर क्लिक करा.
- Click the dial to switch to the curve interface and view the temperature and humidity curves.
- Click “Settings” to modify relevant parameters
- Click “Scene Settings” to select the scene you want to modify
- या दृश्यासाठी अलार्म पॅरामीटर्स बदला.
- आर्द्रता श्रेणी मूल्य सुधारित करा
संलग्नक सूची
- Recording-type Temperature and Humidity Meter *1
- AAA Batteries *3
- चुंबक*2
- External Temperature Sensor Probe *1
- (only for IPT-100S with built-in external probe)
वारंवार विचारले जाणारे प्रश्न
प्रश्न: उपकरण घराबाहेर वापरले जाऊ शकते?
A: No, the device should not be used outdoors to avoid malfunctions caused by adverse weather conditions.
प्रश्न: मी डिव्हाइस कॅलिब्रेट कसे करू?
A: Calibration is not user-accessible. Please contact customer Support if you believe your device requires calibration.
कागदपत्रे / संसाधने
 |
एलिटेक IPT-100, IPT-100S तापमान आणि आर्द्रता डेटा लॉगर [pdf] सूचना पुस्तिका IPT-100, IPT-100S, IPT-100 IPT-100S तापमान आणि आर्द्रता डेटा लॉगर, IPT-100 IPT-100S, तापमान आणि आर्द्रता डेटा लॉगर, आर्द्रता डेटा लॉगर, डेटा लॉगर, लॉगर |