इलेक्ट्रो हार्मोनिक्स एनवायसी-डीएसपी-अणु क्लस्टर स्पेक्ट्रल डिकंपोजर वापरकर्ता मॅन्युअल

Insert the output plug from the supplied 9VDC AC adapter intothe power jack at the top of the Atomic Cluster.
Connect an instrument cable from your instrument to the input jack.

आउटपुट जॅक आणि योग्य दरम्यान इन्स्ट्रुमेंट केबल कनेक्ट करा ampलाइफायर
Press the footswitch to engage the Atomic Cluster and light the LED.

Press and release the footswitch at least twice, in time with your music, to set the tempo.
The LED blinks at the tempo to confirm the speed is set by tap-tempo.

To turn off tap-tempo, simply turn the SPEED knob to reset the refresh speed.
Power down the Atomic Cluster.
पॉवर पुन्हा लागू करताना फूटस्विच दाबा आणि धरून ठेवा.
Continue to hold the footswitch for about two seconds until the LED blinks through all three colors twice.

Release the footswitch to disable tap-tempo.
To re-enable tap-tempo, repeat the disabling process.

परिचय

Welcome to the Electro-Harmonix Atomic Cluster, a unique effect that breaks your signal down to its most basic elements to create effects ranging from rhythmic lo-fi glitch and auto-arpeggiation to ambient synthetic pads.
The Atomic Cluster uses a unique algorithm to reduce the frequency resolution of your instrument, generating resonant oscillations directly related to your input signal.

Control the number of simultaneous oscillations, the speed they refresh (controllable with tap-tempo), and the transition style between them to create a wide range of unique effects.

टेंपो टॅप करा

The footswitch can be used to set the refresh speed. Press and release the footswitch at least twice, in time with your music, to set the tempo. The LED blinks at the tempo to confirm the speed is set by tap-tempo. To turn off
Tap-tempo, simply turn the SPEED knob to reset the refresh speed.
You can completely disable tap-tempo by following these steps:

Power down the Atomic Cluster.
पॉवर पुन्हा लागू करताना फूटस्विच दाबा आणि धरून ठेवा.
फूटस्विच सुमारे दोन सेकंद धरून ठेवा, एलईडी हळूहळू तिन्ही रंगांमधून दोनदा ब्लिंक करेल.
Release the footswitch and tap-tempo is now disabled.
टॅप-टेम्पो पुन्हा-सक्षम करण्यासाठी ही प्रक्रिया पुन्हा करा.

Tap-tempo on/off is recalled through power cycles so you can set it and forget it.

Dynamics Control

By default, the different oscillations have different volumes, based on the input signal.
You can also flatten the dynamics to force all oscillations to have the same volume for a more synthetic effect.

To switch between these two modes, hold the MODE button for about a second.
The LED will flash through three colors, either slowly or rapidly.

The slower blink cycle indicates you are in flat-dynamics mode, while the rapid blink cycle indicates you are in normal, full-dynamics mode.
The state of this mode is recalled through a power cycle.

टीप: Upon entering flat-dynamics mode the volume of the effect signal may change depending on the input level of your signal and the number of ATOMS used.

ऑपरेटिंग सूचना

Insert the output plug from the supplied 9VDC AC adapter into the power jack at the top of the Atomic Cluster.

The unit must be powered to pass a signal, even in bypass.
The pedal features buffered analog bypass.
तुमच्या इन्स्ट्रुमेंटमधून इनपुट जॅकशी इन्स्ट्रुमेंट केबल कनेक्ट करा.

आउटपुट जॅक आणि योग्य दरम्यान इन्स्ट्रुमेंट केबल कनेक्ट करा ampलाइफायर
Press the footswitch to engage the Atomic Cluster and light the LED.

वीज पुरवठा आवश्यकता

खंडtage: 9VDC वर्तमान: 100mA ध्रुवता: केंद्र-नकारात्मक
This device comes equipped with an Electro-Harmonix 9.6DC-200 power supply.
चुकीच्या अ‍ॅडॉप्टरचा किंवा चुकीच्या ध्रुवीयतेसह प्लगचा वापर केल्याने उपकरण खराब होऊ शकते आणि वॉरंटी रद्द होऊ शकते.

पॉवर प्लगवर 10.5VDC पेक्षा जास्त नको.
Power supplies rated for less than 100mA may cause the device to act unreliably.

नियंत्रणे आणि जॅक

VOL Adjusts the output volume.
BLEND आउटपुट मिक्स 100% कोरडे ते 100% ओले समायोजित करते.

SPEED sets how quickly the algorithm refreshes the oscillations it produces. This can also be controlled via tap-tempo.
ATOMS sets how many oscillations are produced at a given moment.
टीप २: Setting SPEED and ATOMS to maximum will give you a sound close to your normal instrument sound. From there, play with lowering ATOMS and SPEED to get a feel for how these controls impact the effect.
टीप २: At lower numbers of ATOMS, you will likely get a more interesting and varied effect with a brighter input signal (a signal with more high-frequency content). If using a guitar, consider the bridge pickup and/or using distortion before the Atomic Cluster.
MODE Button: This button is used to control the transition style between the different oscillations:
Red – Sharp Mode. The transition between oscillations is instant, for a more rhythmic effect.
Green – Smooth Mode The transition between oscillations is smoothly faded, for a more lush, ambient effect.
टीप: at very high SPEED settings, the difference between these two modes is subtle.
Footswitch and Status LED The footswitch engages or bypasses the effect. The LED color indicates the transition mode. In bypass, the LED is off. The LED blinks at the latest tap reading when SPEED is set by tap tempo.
Input Jack Impedance: 2.2MΩ, Max In: +1.5dBu
Output Jack Impedance: 680Ω, Max Out: +2.1dBu
पॉवर जॅक करंट ड्रॉ: 100VDC वर 9.0mA

या उत्पादनाबद्दल प्रश्न आहेत?

ईमेल: info@ehx.com

वारंवार विचारले जाणारे प्रश्न

Q: What is the purpose of tap tempo on off functionality?

A: Tap tempo allows you to synchronize the effect speed with your music by tapping the footswitch in rhythm. Turning off tap tempo resets the refresh speed to default.

कागदपत्रे / संसाधने

Electro Harmonix NYC-DSP-Atomic Cluster Spectral Decomposer [pdf] वापरकर्ता मॅन्युअल
NYC-DSP-Atomic Cluster Spectral Decomposer, NYC-DSP-Atomic Cluster, Spectral Decomposer, Decomposer

संदर्भ

वापरकर्ता मॅन्युअल

Electro Harmonix NYC-DSP-Atomic Cluster Spectral Decomposer

तपशील

उत्पादन वापर सूचना