Ehx Canyon Echo Multi-Function Digital Delay

तपशील

• वीज पुरवठा आवश्यकता:
  • खंडtage: 9VDC
  • चालू: 100 मीए
  • ध्रुवीयता: केंद्र-नकारात्मक

Welcome to the Electro-Harmonix Canyon Echo: an extremely compact digital delay pedal with up to 3 seconds of delay time. The Canyon Echo features tap-tempo—with three different tap-division options a filter control to shape the tone of the repeats, tails mode to keep the repeats going after switching to bypass, and footswitch accessible infinite repeats.

ऑपरेटिंग सूचना

Insert the output plug from the supplied 9VDC AC adapter into the power jack at the top of the Canyon Echo. The unit must be powered to pass signal, even in bypass. The Canyon Echo features buffered analog bypass or digital bypass depending on settings. Connect an instrument cable from your instrument to the Input jack. Connect an instrument cable between the Output jack and a suitable ampलाइफायर पेडल गुंतवण्यासाठी आणि LED पेटवण्यासाठी फूटस्विचवर क्लिक करा.

वीज पुरवठा आवश्यकता: खंडtage: 9VDC चालू: 100mA पोलॅरिटी: केंद्र-नकारात्मक हे उपकरण इलेक्ट्रो-हार्मोनिक्स 9.6DC-200 पॉवर सप्लायसह सुसज्ज आहे. चुकीच्या ॲडॉप्टरचा किंवा चुकीच्या ध्रुवीयतेसह प्लगचा वापर केल्याने उपकरण खराब होऊ शकते आणि वॉरंटी रद्द होऊ शकते. पॉवर प्लगवर 10.5VDC पेक्षा जास्त नको. 100mA पेक्षा कमी रेट केलेल्या वीज पुरवठ्यामुळे डिव्हाइस अविश्वसनीयपणे कार्य करू शकते.

नियंत्रणे आणि जॅक

1. मिश्रण आउटपुट मिश्रण 100% कोरड्या ते 100% ओले समायोजित करते.
2. विलंब Controls the delay time, ranging from 8ms to 3s.
3. फिल्टर करा Applies an adjustable low-pass or high-pass filter to the delay line. Set FILTER to the center or noon position to disable the filters. Turn the  FILTER counterclockwise to place a low-pass filter on the delay effect, giving the Canyon Echo a sound similar to an analog delay. Turn the FILTER clockwise to place a high-pass filter on the delay repeats, for an effect reminiscent of a tape delay. The further you turn the FILTER in either direction, the more filtering is applied to the effect.
4. FDBK Controls how many repeats the Canyon Echo generates. At a minimum, you get one repeat. At maximum, the repeats are nearly endless.
   टीप: The filter is placed in the feedback path of the delay and filters out more signal with each repeat, limiting the maximum repeats at more extreme FILTER settings.
5. TAP DIV Button When the delay time is set by tap-tempo, the TAP DIV button sets the tap-division:
   • Green – 1/8 Note equal to half your tap time
   • Orange – Dotted 1/8 Note equal to 3/4 of your tap time
   • Red – 1/4 Note equal to your tap time
6. Footswitch and Status LED. The footswitch engages or bypasses the effect. The LED indicates the selected tap division. In bypass mode, the LED is off. The LED blinks at the latest tap reading when the delay time is set by tap tempo.
7. इनपुट जॅक प्रतिबाधा: 2.2MΩ, कमाल इन: +1.5 dBu
8. आउटपुट जॅक प्रतिबाधा: 680Ω, Max Out: +2.1 dBu
9. पॉवर जॅक वर्तमान ड्रॉ: 100mA at 9.0VDC.

टेंपो टॅप करा
विलंब वेळ सेट करण्यासाठी फूटस्विचचा वापर केला जाऊ शकतो. टेम्पो सेट करण्‍यासाठी, तुमच्‍या संगीतासोबत, किमान दोनदा फूटस्‍विच दाबा आणि सोडा. टॅप-टेम्पोद्वारे सेट केलेल्या विलंबाची वेळ निश्चित करण्यासाठी टेम्पोवर एलईडी ब्लिंक करते. टॅप-टेम्पो बंद करण्यासाठी, विलंब वेळ रीसेट करण्यासाठी फक्त DELAY नॉब चालू करा. आपण या चरणांचे अनुसरण करून टॅप-टेम्पो पूर्णपणे अक्षम करू शकता:

1. Power down the Canyon Echo.
2. पॉवर पुन्हा लागू करताना फूटस्विच दाबा आणि धरून ठेवा.
3. Continue to hold the footswitch for about two seconds, the LED will slowly blink through all three colors twice.
4. फूटस्विच सोडा; टॅप-टेम्पो आता अक्षम आहे.
5. Repeat this process to re-enable tap-tempo. Tap-tempo disable is recalled through a power cycle, so you can set it and forget it.

Infinite Repeats
When Tails ‘ bypass mode is enabled, you can activate Infinite Repeats mode by pressing and holding the footswitch.Press aholdold the footswitch.

1. After 500ms, the LED begins flashing through all three colors. Infinite Repeats is now active.
2. You can release the footswitch. The delay repeats will continue indefinitely.
3. Tap the footswitch once to re-enter normal delay mode.

While Infinite Repeats mode is active, no new signal is fed into the delay effect. The filter is taken out of the feedback path and placed instead on the delay output, so you can use it to shape the tone of your looping sound without degrading looped repeats as it does in normal delay mode. You can move the DELAY knob while Infinite Repeats mode is active toget pitch-shifted loops, like speeding up or slowing down a tape-machine.

पुच्छ आणि अॅनालॉग बायपास निवड
The Canyon Echo allows you to choose between two bypass modes
ॲनालॉग: द bypass signal is fully analog; the delay effect instantly mutes upon entering bypass.
Tails: The repeats of the delay effect continue to decay naturally upon entering bypass; no new audio enters the delay block; bypass is digital. Tails bypass is selected by default from the factory.

To activate Analog bypass, do the following:

1. Press and hold the TAP DIV push button.
2. दोन सेकंदांनंतर, LED पार्टी मोडमध्ये प्रवेश करते, जेथे ते तीन LED रंगांमधून वेगाने सायकल चालवते.
3. बटण सोडा; अॅनालॉग बायपास आता सक्रिय आहे.
4. टेल बायपासवर परत जाण्यासाठी हीच प्रक्रिया पुन्हा करा.

The bypass mode setting is remembered through power cycles, so you can set it and forget it.

वारंवार विचारले जाणारे प्रश्न

प्रश्न: जर डिव्हाइस चालू होत नसेल तर मी काय करावे?
A: Ensure that you are using the correct 9VDC adapter with center-negative polarity and that the power supply meets the requirements of the device.

Q: How can I achieve infinite repeats?
A: Access infinite repeats by using the footswitch while in tails mode to continue repeats after switching to bypass.

कागदपत्रे / संसाधने

ehx Canyon Echo Multi Function Digital Delay [pdf] वापरकर्ता मॅन्युअल Canyon Echo Multi Function Digital Delay, Multi Function Digital Delay, Function Digital Delay, Digital Delay

संदर्भ

• वापरकर्ता मॅन्युअल