ED-HMI2002-070C औद्योगिक ऑटोमेशन आणि नियंत्रण
“
तपशील
- मॉडेल: ED-HMI2002-070C
- Screen Size: 7-inch LCD touch screen
- Processor: Raspberry Pi 4
- RAM: Customizable based on user needs
- Storage: SD card system, customizable based on user needs
- Camera: 8 Megapixel front camera (optional)
- यूएसबी पोर्ट: १ x यूएसबी ३.०, २ x यूएसबी २.०
- Audio: 3.5mm audio jack for microphone in and stereo out
- HDMI Ports: 2 x micro-HDMI supporting 4K 60Hz
- Power Input: USB Type-C, 5V 3A
उत्पादन वापर सूचना
1. हार्डवेअर ओव्हरview
The ED-HMI2002-070C is a 7-inch industrial HMI powered by
Raspberry Pi 4. It offers customizable RAM and SD card systems to
suit different user needs.
2. पॅकिंग सूची
Ensure the package includes all necessary components listed in
the packing list section of the manual.
3. देखावा
3.1 फ्रंट पॅनेल
The front panel features a 7-inch LCD touch screen with a
resolution of up to 1024×600 and a multipoint capacitive
touchscreen. An optional 8 Megapixel front camera may be
समाविष्ट.
3.2 मागील पॅनेल
The rear panel includes installation holes for buckles to secure
इंस्टॉलेशन दरम्यान डिव्हाइस.
3.3 साइड पॅनेल
The side panel consists of various interfaces including
Ethernet, USB ports, audio jack, HDMI ports, and power input.
4. सूचक
The indicator lights provide information on the status of the
Ethernet connection, with yellow and green indicators indicating
different states.
5. इंटरफेस
5.1 वीज पुरवठा
Connect the USB Type-C power input with a 5V 3A power adapter to
ensure optimal performance of the Raspberry Pi 4.
5.2 1000M Ethernet
The RJ45 terminal with indicator provides access to the adaptive
10/100/1000M Ethernet port for network connectivity.
वारंवार विचारले जाणारे प्रश्न
Q: Can I upgrade the RAM on the ED-HMI2002-070C?
A: Yes, the RAM on the ED-HMI2002-070C is customizable to meet
different requirements.
Q: How do I connect external devices to the HMI?
A: You can use the USB ports, HDMI ports, and audio jack to
connect external devices such as keyboards, mice, displays, and
हेडफोन
"`
ED-HMI2002-070C
वापरकर्ता मॅन्युअल
ईडीए टेक्नॉलॉजी कंपनी लिमिटेड द्वारे बांधलेले: २०२५-०८-०१
ED-HMI2002-070C
१ हार्डवेअर मॅन्युअल
हा धडा उत्पादनाची ओळख करून देतोview, packing list, appearance, indicator and interface.
1.1 ओव्हरview
ED-HMI2002-070C is a 7-inch industrial HMI based on Raspberry Pi 4. According to different application scenarios and user needs, different specifications of RAM and SD card computer systems can be selected.
· RAM can choose 1GB, 2GB, 4GB and 8GB · SD card can choose 32GB and 64GB ED-HMI2002-070C provides HDMI, USB 2.0, USB 3.0 and Ethernet interfaces, supporting access to the network through Wi-Fi and Ethernet. ED-HMI2002-070C integrates 7-inch LCD touch screen and is mainly used in industrial control and IOT.
1.2 पॅकिंग सूची
· 1x ED-HMI2002-070C Unit
1.3 देखावा
प्रत्येक पॅनेलवरील इंटरफेसची कार्ये आणि व्याख्या सादर करत आहे.
1.3.1 फ्रंट पॅनेल
या विभागात फ्रंट पॅनलची कार्ये आणि व्याख्या सादर केल्या आहेत.
ईमेल: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
फोन: +८६-१५९२१४८३०२८ (चीन) | +८६-१८२१७३५१२६२ (परदेशी)
ED-HMI2002-070C
नाही.
कार्य व्याख्या
1 x LCD display, 7-inch LCD touch screen, which supports up to 1024×600 and multipoint capacitive 1
टचस्क्रीन
2
१ x कॅमेरा (पर्यायी), ८ मेगापिक्सेल फ्रंट कॅमेरा.
1.3.2 मागील पॅनेल
या विभागात मागील पॅनेलच्या इंटरफेस आणि व्याख्यांचा परिचय करून दिला आहे.
नाही.
कार्य व्याख्या
4 x installation holes of buckle, which are used to fix the buckles to the device (for use when 1
installing the device).
1.3.3 साइड पॅनेल
या विभागात साइड पॅनेलच्या इंटरफेस आणि व्याख्यांचा परिचय करून दिला आहे.
ईमेल: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
फोन: +८६-१५९२१४८३०२८ (चीन) | +८६-१८२१७३५१२६२ (परदेशी)
ED-HMI2002-070C
नाही.
कार्य व्याख्या
1
1 x Ethernet interface (10/100/1000M adaptive), RJ45 terminal for Ethernet access.
2
2 x USB 3.0 ports, type-A connector, each channel supports up to 5Gbps.
3
२ x USB २.० पोर्ट, टाइप-ए कनेक्टर, प्रत्येक चॅनेल ४८०Mbps पर्यंत सपोर्ट करते.
4
1 x Audio In/Stereo Out, 3.5mm audio jack for microphone in and stereo out.
5
2 x HDMI ports, micro-HDMI connector, which can connect a display and supports 4K 60Hz.
6
1 x USB Type-C connector, which supports 5V 3A power input.
7
उष्णता नष्ट करणारी छिद्रे, जी थंड करण्याची कार्यक्षमता सुधारण्यास मदत करतात.
8
उष्णता नष्ट करणारी छिद्रे, जी थंड करण्याची कार्यक्षमता सुधारण्यास मदत करतात.
1.4 सूचक
This section introduces various statuses and meanings of indicators contained in EDHMI2002-070C.
Indicator Yellow indicator of Ethernet port
ब्लिंक बंद असताना स्थिती
Description The Ethernet connection is in the normal state. The Ethernet connection is abnormal. The Ethernet connection is not set up.
ईमेल: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
फोन: +८६-१५९२१४८३०२८ (चीन) | +८६-१८२१७३५१२६२ (परदेशी)
ED-HMI2002-070C
Indicator Green indicator of Ethernet port
ब्लिंक बंद असताना स्थिती
Description The Ethernet connection is in the normal state. Data is being transmitted over the Ethernet port. The Ethernet connection is not set up.
1.5 इंटरफेस
उत्पादनातील प्रत्येक इंटरफेसची व्याख्या आणि कार्य सादर करत आहे.
1.5.1 वीज पुरवठा
The ED-HMI2002-070C includes one power input, and the silkscreen is “PWR IN”. The connector is USB Type-C, which supports 5V 3A power input.
टीआयपी
In order for Raspberry Pi 4 to achieve better performance, it is recommended to use a 5V 3A power adapter.
1.5.2 1000M Ethernet
ED-HMI2002-070C includes one adaptive 10/100/1000M Ethernet port, RJ45 terminal with
indicatorand the silkscreen is ” “which is used to access the Ethernet. The pins corresponding to the terminals are defined as follows
पिन आयडी 1 2 3 4 5 6 7 8
पिन नाव TX1+ TX1TX2+ TX2TX3+ TX3TX4+ TX4-
ईमेल: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
फोन: +८६-१५९२१४८३०२८ (चीन) | +८६-१८२१७३५१२६२ (परदेशी)
ED-HMI2002-070C
६.३ ऑडिओ
The ED-HMI2002-101C device contains 1 audio interface, 3.5mm four-section headphone terminal, and the silkscreen is ” “. It supports OMTP specification stereo headphone output and single channel microphone recording.
1.5.4 HDMI
ED-HMI2002-070C includes 2 HDMI ports, and the silkscreen is “HDMI”. The connector is microHDMI, which can connect to HDMI displays and supports up to 4Kp60.
1.5.5 यूएसबी 2.0
ED-HMI2002-070C includes 2 USB 2.0 ports, and the silkscreen is ” “. The connector is USB Type-A, which can connect to standard USB 2.0 peripherals and supports up to 480Mbps.
1.5.6 यूएसबी 3.0
ED-HMI2002-070C includes 2 USB 3.0 ports, and the silkscreen is ” “. The connector is USB Type-A, which can connect to standard USB 3.0 peripherals and supports up to 5Gbps.
ईमेल: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
फोन: +८६-१५९२१४८३०२८ (चीन) | +८६-१८२१७३५१२६२ (परदेशी)
ED-HMI2002-070C
2 डिव्हाइस स्थापित करणे
This chapter describes the specific operations for installing the device.
2.1 Installing Raspberry Pi 4 (optional)
If the product model purchased by the customer does not include Raspberry Pi 4, Raspberry Pi 4 needs to be installed first. Preparation
· ED-HMI2002-070C and SD card have been obtained from the packaging box. · Raspberry Pi 4 is ready. · A cross screwdriver has been prepared. Steps 1. Insert the SD card into SD card slot of Raspberry Pi 4.
2. Use a screwdriver to loosen 4 M3 screws on ED-HMI2002-070C case counterclockwise, and remove the case.
ईमेल: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
फोन: +८६-१५९२१४८३०२८ (चीन) | +८६-१८२१७३५१२६२ (परदेशी)
ED-HMI2002-070C
3. Use a screwdriver to loosen 3 M2.5 screws on ED-Pi4PCOOLER counterclockwise, and remove the cooler.
ईमेल: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
फोन: +८६-१५९२१४८३०२८ (चीन) | +८६-१८२१७३५१२६२ (परदेशी)
ED-HMI2002-070C
TIP – ED-Pi4PCOOLER is an optional cooling accessory. – If there is a film of thermal conductive silicone, please remove it . 4. Place the Raspberry Pi 4 on the back of the LCD screen so that the installation holes of the Raspberry Pi 4 can align with the four stud holes on the back of the LCD screen.
5. Pass the FPC cable through the reserved hole on the ED-Pi4PCOOLER.
6. Plug the FPC cable into the CAMERA and DISPLAY ports of the Raspberry Pi 4 respectively.
7. Make 3 mounting holes of ED-Pi4PCOOLER aligning with the mounting holes of Raspberry Pi 4.
ईमेल: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
फोन: +८६-१५९२१४८३०२८ (चीन) | +८६-१८२१७३५१२६२ (परदेशी)
ED-HMI2002-070C
8. Insert 3 M2.5*12 screws and 1 M2.5*5 screw, then tighten them clockwise to secure the Raspberry Pi 4 and ED-Pi4PCOOLER to the back side of the LCD screen.
9. Plug the power cord into the corresponding 40-Pin on the Raspberry Pi 4.
10. Cover the case, insert 4 M3 screws, and tighten clockwise to fix the case to the back of the LCD screen.
ईमेल: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
फोन: +८६-१५९२१४८३०२८ (चीन) | +८६-१८२१७३५१२६२ (परदेशी)
ED-HMI2002-070C
2.2 एम्बेडेड इन्स्टॉलेशन
ED-HMI2002-070C device supports embedded front installation. Standard Package doesn’t include the panel mounting accessories, please purchase the ED-ACCHMI-Front from our distributors in advance. Preparation
· ED-ACCHMI-Front accessory kit has been obtained (contains 4xbuckles, 4xM4*10 screws and 4xM4*16 screws).
· A cross screwdriver has been prepared. Steps 1. ensure the opening size of the cabinet according to the size of ED-HMI2002-070C, as shown in
खालील आकृती.
2. Drill a hole on the cabinet according to the hole size of step1. 3. Embed the ED-HMI2002-070C into the cabinet from the outside.
४. बकलच्या स्क्रू होल (थ्रेड न केलेले होल) ला डिव्हाइसवरील बकल इंस्टॉलेशन होलशी संरेखित करा.
ईमेल: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
फोन: +८६-१५९२१४८३०२८ (चीन) | +८६-१८२१७३५१२६२ (परदेशी)
ED-HMI2002-070C
५. बकलमधून जाण्यासाठी ४ M5*4 स्क्रू वापरा आणि बकलला उपकरणाशी जोडण्यासाठी घड्याळाच्या दिशेने घट्ट करा; नंतर बकलच्या स्क्रू होल (थ्रेडेड होल) मधून जाण्यासाठी ४ M4*10 स्क्रू वापरा आणि बकलमधून घड्याळाच्या दिशेने शेवटपर्यंत घट्ट करा.
ईमेल: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
फोन: +८६-१५९२१४८३०२८ (चीन) | +८६-१८२१७३५१२६२ (परदेशी)
ED-HMI2002-070C
3 उपकरण बूट करणे
या प्रकरणात केबल्स कसे जोडायचे आणि डिव्हाइस कसे बूट करायचे याची ओळख करून दिली आहे.
3.1 कनेक्टिंग केबल्स
This section describes how to connect cables. Preparation
· सामान्यपणे वापरता येणारे डिस्प्ले, माऊस, कीबोर्ड आणि पॉवर अॅडॉप्टर सारख्या अॅक्सेसरीज तयार आहेत.
· सामान्यपणे वापरता येईल असे नेटवर्क. · सामान्यपणे वापरता येईल अशी HDMI केबल आणि नेटवर्क केबल मिळवा. कनेक्टिंग केबल्सचे योजनाबद्ध आकृती: प्रत्येक इंटरफेसच्या पिन परिभाषेसाठी आणि वायरिंगच्या विशिष्ट पद्धतीसाठी कृपया 1.5 इंटरफेस पहा.
ईमेल: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
फोन: +८६-१५९२१४८३०२८ (चीन) | +८६-१८२१७३५१२६२ (परदेशी)
ED-HMI2002-070C
3.2 प्रथमच प्रणाली बूट करणे
ED-HMI2002-070C मध्ये पॉवर स्विच नाही. वीज पुरवठा जोडल्यानंतर, सिस्टम सुरू होईल.
The product is installed with the Desktop version system when it leaves the factory. After the device is started, it will directly enter the desktop.
ईमेल: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
फोन: +८६-१५९२१४८३०२८ (चीन) | +८६-१८२१७३५१२६२ (परदेशी)
ED-HMI2002-070C
TIP Default username is pi , Default password is raspberry . For more information about Raspberry Pi 4 configuration operations, please refer to the documentation on the Raspberry Pi official website. The documentation path is:Raspberry Piopen in new w (https://www.raspberrypi.com/) .
ईमेल: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
फोन: +८६-१५९२१४८३०२८ (चीन) | +८६-१८२१७३५१२६२ (परदेशी)
ED-HMI2002-070C
4 रिमोट लॉगिन
This chapter introduces how to log in the device remotely.
4.1 डिव्हाइस IP शोधणे
finding device IP
4.2 VNC द्वारे डिव्हाइस डेस्कटॉपशी जोडणे
After the device starts normally, you can choose to remotely connect to the device through VNC to configure or debug it. Preparation:
· The RealVNC Viewer tool has been installed on PC. · ED-HMI2002-070C has been connected to the network through the router. · IP address of ED-HMI2002-070C has been get. · The VNC function in the ED-HMI2002-070C system has been turned on, as shown in the
खालील आकृती.
पायऱ्या:
1. RealVNC उघडा Viewer आणि मध्ये “नवीन कनेक्शन…” निवडा File खालील आकृतीत दर्शविल्याप्रमाणे कनेक्शन तयार करण्यासाठी विंडो उघडण्यासाठी मेनू बारमध्ये.
ईमेल: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
फोन: +८६-१५९२१४८३०२८ (चीन) | +८६-१८२१७३५१२६२ (परदेशी)
ED-HMI2002-070C
2. ED-HMI2002-070C चा IP पत्ता प्रविष्ट केल्यानंतर, “OK” वर क्लिक करा.
ईमेल: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
फोन: +८६-१५९२१४८३०२८ (चीन) | +८६-१८२१७३५१२६२ (परदेशी)
ED-HMI2002-070C
3. पॉप अप होणाऱ्या ऑथेंटिकेशन प्रॉम्प्ट बॉक्समध्ये वापरकर्तानाव आणि पासवर्ड एंटर करा.
टीप डीफॉल्ट वापरकर्तानाव pi आहे, डीफॉल्ट पासवर्ड रास्पबेरी आहे.
4. लॉग इन करण्यासाठी "ओके" निवडा आणि रिमोट डेस्कटॉपशी कनेक्ट करा.
ईमेल: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
फोन: +८६-१५९२१४८३०२८ (चीन) | +८६-१८२१७३५१२६२ (परदेशी)
ED-HMI2002-070C
ईमेल: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
फोन: +८६-१५९२१४८३०२८ (चीन) | +८६-१८२१७३५१२६२ (परदेशी)
ED-HMI2002-070C
६ ऑपरेटिंग सिस्टम स्थापित करणे (पर्यायी)
· If you are purchasing a device without Raspberry Pi 4 and SD card, the device does not come with an operating system by default. Raspberry Pi 4 needs to be installed first, then you need to install os. Our company supports to install the OS by installing the standard Raspberry Pi OS first, and then install the Firmware package.
· If you are purchasing a device with Raspberry Pi 4 and SD card, the device is shipped with an operating system by default. If the OS is corrupted during use or the user needs to replace the OS, it is necessary to re-download the appropriate system image and install it. Our company supports to install the OS by installing the standard Raspberry Pi OS first, and then install the Firmware package.
The following section describes the specific operations of image download, SD card flashing and installation of Firmware packages.
टीआयपी
Please make sure you install our Firmware package after you install Standard Raspberry Pi OS, otherwise the display and touch won’t work.
5.1 OS डाउनलोड करत आहे File
तुम्ही संबंधित अधिकृत रास्पबेरी पाय ओएस डाउनलोड करू शकता. file तुमच्या प्रत्यक्ष गरजांनुसार, डाउनलोड मार्ग खाली सूचीबद्ध आहे:
OS
पथ डाउनलोड करा
रास्पबेरी पाई ओएस (डेस्कटॉप) 64-बिट-बुकवर्म (डेबियन 12)
https://downloads.raspberrypi.com/raspios_arm64/images/ raspios_arm64-2024-07-04/2024-07-04-raspios-bookworm-arm64.img.xz (https://downloads.raspberrypi.com/raspios_arm64/images/ raspios_arm64-2024-07-04/2024-07-04-raspios-bookworm-arm64.img.xz)
रास्पबेरी Pi OS(लाइट) 64-बिट-बुकवर्म (डेबियन 12)
https://downloads.raspberrypi.com/raspios_lite_arm64/images/ raspios_lite_arm64-2024-07-04/2024-07-04-raspios-bookworm-arm64lite.img.xz (https://downloads.raspberrypi.com/raspios_lite_arm64/images/ raspios_lite_arm64-2024-07-04/2024-07-04-raspios-bookworm-arm64lite.img.xz)
रास्पबेरी पाई ओएस (डेस्कटॉप) 32-बिट-बुकवर्म (डेबियन 12)
https://downloads.raspberrypi.com/raspios_armhf/images/ raspios_armhf-2024-07-04/2024-07-04-raspios-bookworm-armhf.img.xz (https://downloads.raspberrypi.com/raspios_armhf/images/ raspios_armhf-2024-07-04/2024-07-04-raspios-bookworm-armhf.img.xz)
रास्पबेरी Pi OS(लाइट) 32-बिट-बुकवर्म (डेबियन 12)
https://downloads.raspberrypi.com/raspios_lite_armhf/images/ raspios_lite_armhf-2024-07-04/2024-07-04-raspios-bookworm-armhf-
ईमेल: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
फोन: +८६-१५९२१४८३०२८ (चीन) | +८६-१८२१७३५१२६२ (परदेशी)
ED-HMI2002-070C
OS
पथ डाउनलोड करा
lite.img.xz (https://downloads.raspberrypi.com/raspios_lite_armhf/images/ raspios_lite_armhf-2024-07-04/2024-07-04-raspios-bookworm-armhflite.img.xz)
5.2 Flashing to SD Card
It is recommended to use the Raspberry Pi official tools. The download paths are as follows:
· रास्पबेरी पाय इमेजर : https://downloads.raspberrypi.org/imager/imager_latest.exe (https:// downloads.raspberrypi.org/imager/imager_latest.exe)
· एसडी कार्ड फॉरमॅटर: https://www.sdcardformatter.com/download/ (https://www.sdcardformatter.com/download/)
तयारी:
· The downloading and installation of the official tools to the computer have been completed. · An SD card reader has been prepared. · The OS file प्राप्त झाले आहे.
पायऱ्या:
विंडोज सिस्टीमचा वापर करून या चरणांचे वर्णन केले आहेampले
1. Open the device case, then pull out SD card. a. Remove the metal case of the ED-HMI2002-070C by unscrewing the 4 M3 screws on the metal case counterclockwise with a screwdriver.
b. Remove the Raspberry Pi 4 by unscrewing the four screws that mount the Raspberry Pi 4 counterclockwise with a screwdriver. c. Pull out SD card from SD card slot of Raspberry Pi 4.
2. Insert the SD card into the card reader, and then insert the card reader into the USB port of your computer.
५. SD कार्ड फॉरमॅटर उघडा, फॉरमॅट केलेला ड्राइव्ह लेटर निवडा आणि फॉरमॅट करण्यासाठी खालच्या उजवीकडे "फॉरमॅट" वर क्लिक करा.
ईमेल: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
फोन: +८६-१५९२१४८३०२८ (चीन) | +८६-१८२१७३५१२६२ (परदेशी)
ED-HMI2002-070C
६. पॉप-अप प्रॉम्प्ट बॉक्समध्ये, "होय" निवडा. ७. फॉरमॅटिंग पूर्ण झाल्यावर, प्रॉम्प्ट बॉक्समध्ये "ओके" वर क्लिक करा. ८. एसडी कार्ड फॉरमॅटर बंद करा. ९. रास्पबेरी पाय इमेजर उघडा, "ओएस निवडा" निवडा आणि पॉप-अपमध्ये "कस्टम वापरा" निवडा.
फलक
१०. प्रॉम्प्टनुसार, ओएस निवडा file वापरकर्ता-परिभाषित मार्ग अंतर्गत आणि मुख्य पृष्ठावर परत या.
११. "स्टोरेज निवडा" वर क्लिक करा, "स्टोरेज" इंटरफेसमध्ये डीफॉल्ट डिव्हाइस निवडा आणि मुख्य पृष्ठावर परत या.
१२. “पुढील” वर क्लिक करा, पॉप-अप “यूज ओएस कस्टमायझेशन?” पॅनेलमध्ये “नाही” निवडा.
ईमेल: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
फोन: +८६-१५९२१४८३०२८ (चीन) | +८६-१८२१७३५१२६२ (परदेशी)
ED-HMI2002-070C
१३. प्रतिमा लिहिण्यास सुरुवात करण्यासाठी पॉप-अप "चेतावणी" उपखंडात "होय" निवडा.
१४. ओएस लेखन पूर्ण झाल्यानंतर, file सत्यापित केले जाईल.
13. After the verification is completed, click “CONTINUE” in the pop-up “Write Successful” box. 14. Close the Raspberry Pi Imager, remove the SD card. 15. Insert the SD card into the SD card slot of the Raspberry Pi 4 and close the device case.
a. Insert the SD card into the SD card slot of the Raspberry Pi 4.
ईमेल: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
फोन: +८६-१५९२१४८३०२८ (चीन) | +८६-१८२१७३५१२६२ (परदेशी)
ED-HMI2002-070C
b. Secure the Raspberry Pi 4 by tightening the 4 screws for mounting the Raspberry Pi 4 clockwise with a screwdriver.
c. Tighten the 4 M3 screws on the metal case of the ED-HMI2002-070C clockwise with a screwdriver and close the device case.
5.3 फर्मवेअर पॅकेज स्थापित करणे
After installing the standard Raspberry Pi OS on the ED-HMI2002-070C.You need to configure the system by adding edatec apt source and installing firmware package to make the system work. The following is an exampडेबियन १२ (बुकवर्म) डेस्कटॉप आवृत्तीचा एक भाग.
तयारी:
· The flashing to SD card of the Raspberry Pi standard OS (bookworm) has been completed. · The device has booted normally and the relevant boot configuration has been completed.
1. The ED-HMI2002-070C device has been successfully started and connected to the network. 2. Execute the following commands in sequence in the command pane to add the edatec apt
स्रोत
श कurl -sS https://apt.edatec.cn/pubkey.gpg | sudo apt-key "deb" प्रतिध्वनी जोडा https://apt.edatec.cn/raspbian stable main " | sudo tee /etc/apt/sources.list.d/edatec.list sudo apt अपडेट
TIP If you copy the command directly and there are line breaks when pasting, please delete the line breaks and add spaces in those places.
3. Execute the following command to install the firmware package.
ईमेल: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
फोन: +८६-१५९२१४८३०२८ (चीन) | +८६-१८२१७३५१२६२ (परदेशी)
sudo apt install -y ed-hmi2002-070c-firmware ed-linux-image-6.6.31-v8
ED-HMI2002-070C
sh
4. Restart the device after installation is complete.
sh sudo रीबूट करा
5. If the screen still does not work after restarting, execute the following command to check whether the firmware package has been successfully installed.
sh dpkg -l | grep ed-
खालील चित्रातील परिणाम सूचित करतो की फर्मवेअर पॅकेज यशस्वीरित्या स्थापित केले गेले आहे.
टीआयपी
If you have installed the wrong firmware package, you can execute sudo apt-get –purge remove package to delete it, where “package” is the package name.
ईमेल: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
फोन: +८६-१५९२१४८३०२८ (चीन) | +८६-१८२१७३५१२६२ (परदेशी)
कागदपत्रे / संसाधने
 |
EDA Technology ED-HMI2002-070C Industrial Automation and Control [pdf] वापरकर्ता मॅन्युअल ED-HMI2002-070C, ED-HMI2002-070C Industrial Automation and Control, ED-HMI2002-070C, Industrial Automation and Control, Automation and Control, Control |