coolo Zigbee Smart Light Sensor User Manual

Coolo Zigbee Smart Light Sensor

नेटवर्क कॉन्फिगरेशन

1. उत्पादनावर शक्ती
   • Align the opener to the slot
   • बॅटरी कव्हर उघडण्यासाठी घड्याळाच्या उलट दिशेने फिरवा
   • Remove the battery insulation film to power
2. RESET बटण 3s साठी दाबा आणि सोडा, नेटवर्क कॉन्फिगरेशनसाठी लाल LED फ्लॅश होईल.

स्थापना सूचना

स्थापना स्थिती
Remove the protective film from the adhesive on the base. Stick the device where needed as shown in the following figure.

कृपया मॅन्युअल काळजीपूर्वक वाचा आणि उत्पादनाचा योग्य वापर करा
खरेदी केल्याबद्दल धन्यवाद.asing and using this product. Before using the product, please read the manual carefully and use the product correctly. In order to avoid damage to the equipment, such as all consequences caused by abnormal operation, the company will not bear any responsibility. The pictures in this manual are used to guide the user’s operation and are for reference only. Please refer to the actual product for details.

उत्पादन वर्णन

टिपा:
This product must be connected to the Zigbee gateway to function properly and upload data to the server/APP

उत्पादन पॅरामीटर्स

• Product Name Zigbee Ambient Light Sensor
• वायरलेस प्रोटोकॉल Zigbee 3.0
• Detection Range 0~157K Lux
• Battery TypeCR2450
• Standby Current<10uA
• Working Temperature -10 ~ 55 C
• Working Humidity 0% ~ 95%RH
• Product Size Ф 33×16mm