IKT Self-Cleaning Bottom Loading Water Cooler Dispenser with Ice Maker

परिचय

Thank you for choosing the IKT Self-Cleaning Bottom Loading Water Cooler Dispenser with Built-in Ice Maker. This manual provides important information for the safe operation, installation, maintenance, and troubleshooting of your appliance. Please read it thoroughly before use and retain it for future reference.

महत्वाची सुरक्षितता माहिती

• डिस्पेंसर नेहमी सपाट, स्थिर पृष्ठभागावर ठेवा.
• युनिटभोवती योग्य वायुवीजन असल्याची खात्री करा.
• खराब झालेल्या पॉवर कॉर्ड किंवा प्लगने डिस्पेंसर चालवू नका.
• Keep children away from the hot water dispenser area due to the risk of burns. Utilize the child safety lock.
• साफसफाई करण्यापूर्वी किंवा देखभाल करण्यापूर्वी युनिट अनप्लग करा.
• हे उपकरण केवळ घरातील वापरासाठी डिझाइन केलेले आहे.

उत्पादन संपलेview

The IKT water cooler dispenser provides hot, cold, and room temperature water, along with a built-in ice maker. It features a bottom-loading design for easy bottle replacement and a self-cleaning function for hygiene.

आकृती 1: समोर view of the IKT Water Cooler Dispenser.

Figure 2: Close-up of the control panel with indicator lights for ice making, child lock, lack of water, ON/OFF, ECO mode, hot water, fresh water, and cold water.

Figure 3: Illustration of the 3-in-1 functionality: Hot Water, Cold Water, Room Temperature Water, and Ice Cubes.

सेटअप आणि स्थापना

1. अनपॅक करणे

• डिस्पेंसर त्याच्या पॅकेजिंगमधून काळजीपूर्वक काढा.
• Inspect the unit for any shipping damage. Contact your retailer if damage is found.
• कोणत्याही टेप किंवा संरक्षक फिल्मसह सर्व पॅकिंग साहित्य काढून टाका.

2. प्लेसमेंट

• Place the dispenser on a level, sturdy surface capable of supporting its weight when full.
• Ensure there is at least 4 inches (10 cm) of clearance from walls to allow for proper ventilation.
• थेट सूर्यप्रकाश किंवा उष्णता स्त्रोत टाळा.
• Do not place in an area where the temperature will drop below 50°F (10°C).

Figure 4: Product dimensions for placement reference: 16.54 inches (D) x 12.2 inches (W) x 40.75 inches (H).

3. Water Bottle Installation (Bottom Load)

1. खालच्या कॅबिनेटचा दरवाजा उघडा.
2. मानक ३ किंवा ५-गॅलन पाण्याच्या बाटलीतून टोपी काढा.
3. Insert the probe from the dispenser into the water bottle opening. Ensure the probe is fully inserted.
4. पाण्याची बाटली कॅबिनेटमध्ये सरकवा आणि दरवाजा बंद करा.
5. डिस्पेंसरला ग्राउंड केलेल्या इलेक्ट्रिकल आउटलेटमध्ये प्लग करा.
6. Allow approximately 15-20 minutes for the water tanks to fill and the water to reach desired temperatures before dispensing.

Figure 5: Illustration of a 5-gallon water bottle being placed into the bottom loading compartment.

Figure 6: Diagram showing the bottom loading mechanism and water being drawn upwards.

ऑपरेटिंग सूचना

1. पाणी वितरण

• थंड पाणी: Place your cup under the cold water spigot and press the cold water button/lever.
• खोलीचे तापमान पाणी: Place your cup under the room temperature water spigot and press the room temperature water button/lever.
• गरम पाणी (बाल सुरक्षा लॉकसह): To dispense hot water, first press and hold the child safety lock button, then press the hot water button/lever. Release the child safety lock button once hot water begins to flow.

Figure 7: The child safety lock feature, requiring a two-step process to dispense hot water.

2. Ice Making Function

• The dispenser has a built-in ice maker that produces bullet-shaped ice.
• Ice production starts automatically when the ice-making function is enabled.
• The unit can produce up to 22 lbs of ice daily and stores approximately 0.88 lbs.
• टीप: This unit does not keep ice frozen. Ice will melt if not used, and the water will return to the reservoir for new ice production.

Figure 8: Details on ice production: 7 minutes per cycle, 9 pieces per cycle, 22 lbs daily capacity. Note that ice is not kept frozen.

आकृती 9: अंतर्गत view showing the ice making mechanism and the UV lamp in the cold water reservoir.

3. Energy Saving Mode (ECO Function)

• Press the "ECO" button on the control panel to activate the energy-saving mode.
• In ECO mode, the machine will stop heating water at night to conserve energy.

Figure 10: The dispenser operating in low light, demonstrating the illuminated dispensing area, which can be managed with the ECO mode.

देखभाल आणि स्वच्छता

1. स्वयं-सफाई कार्य

• To activate the self-cleaning function, press and hold the ice-making button for 3 seconds.
• The indicator light will blink, and the power light will remain on during the cleaning cycle.
• The machine will automatically shut off after approximately 10 minutes.
• एक UV lamp is located in the cold water reservoir for enhanced sanitation.

Figure 11: Instructions for activating the self-cleaning function by pressing the ice button for 3 seconds. The cycle lasts 10 minutes.

Figure 12: Diagram illustrating the UV-infused cleaning technology, which helps reduce contaminants and improve water taste.

2. Drip Tray Cleaning

• The removable drip tray should be emptied and cleaned regularly to prevent overflow and maintain hygiene.
• Simply slide out the tray, empty any accumulated water, wash with mild soap and water, rinse thoroughly, and replace.

समस्यानिवारण

तपशील

उपदेशात्मक व्हिडिओ

हमी आणि समर्थन

For warranty information or technical support, please refer to the documentation included with your purchase or contact IKT customer service directly. Contact details are typically available on the manufacturer's official webसाइटवर किंवा तुमच्या किरकोळ विक्रेत्याद्वारे.

Please have your model number (IKTLYCZ629BBK) and purchase date ready when contacting support.