Herdio 6.5 Inch 240W Waterproof Marine Speakers Instruction Manual

1. परिचय

Thank you for choosing Herdio 6.5 Inch 240W Waterproof Marine Speakers. This manual provides essential information for the proper installation, operation, and maintenance of your new speakers. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product. These speakers are designed for durability and high-quality audio in various outdoor and marine environments.

2. सुरक्षितता माहिती

• विद्युत सुरक्षा: Ensure all wiring is correctly connected and insulated to prevent short circuits. Disconnect power before installation or maintenance.
• माउंटिंग: Securely mount speakers to a stable surface to prevent detachment during operation, especially in moving vehicles or boats.
• आवाज पातळी: जास्त आवाजाच्या पातळीत जास्त काळ राहिल्याने श्रवणशक्तीचे नुकसान होऊ शकते. आवाज आरामदायी पातळीवर समायोजित करा.
• पाणी एक्सपोजर: While these speakers are waterproof, avoid submerging them. Ensure proper sealing during installation to maintain water resistance.
• तापमान: Avoid exposing speakers to extreme temperatures outside their operating range.

3. पॅकेज सामग्री

तुमच्या पॅकेजमध्ये सर्व वस्तू आहेत का ते तपासा:

• Marine Waterproof Speaker x 2
• निर्देश पुस्तिका x 1
• Speaker Cables x 2 (9.8 feet each)
• LED Light Cables x 2
• Mounting Hardware (screws, foam gasket)

Figure 3.1: Included components in the Herdio Marine Speaker package.

4. उत्पादनाची वैशिष्ट्ये

The Herdio 6.5 Inch Marine Speakers are engineered for robust audio performance and durability in challenging environments.

• 240-Watt Audio Performance: Delivers 60 watts RMS and 240 watts max power, with a frequency response of 40Hz-18kHz and 4-ohm impedance. Equipped with 2-way full-range audio for rich, balanced stereo sound.
• 6.5-Inch Marine Speaker Pair: Includes 2 component speakers, each with a standard 6.5-inch size. Built with water-resistant and weather-resistant construction, they stand up to splashes and outdoor conditions—suitable for multiple vehicles.
• अंगभूत निळे एलईडी दिवे: Features integrated blue LED lights to enhance ambiance. Designed with durability in mind, including an ABS machined gasket and grill to resist sun damage from UV rays.
• स्लिम, लो-प्रोfile डिझाइन: Constructed with a slim, low-profile build for easy installation on boats, marine watercraft, and off-road vehicles. The classic black finish adds a clean, stylish touch. Suitable for Boat, RV, ATV, UTV, Golf Cart.
• सुलभ स्थापना: Comes with 2 pieces of 9.8-foot speaker wire for straightforward setup. Fits universal OEM replacement standards.

Figure 4.1: Herdio 6.5 Inch Marine Speakers with LED illumination.

Figure 4.2: Illustration of 2-Way Full Range Stereo Sound capability.

Figure 4.3: Slim design and power rating of the waterproof speaker.

Figure 4.4: Rugged marine-grade construction with IPX5 waterproof rating.

Figure 4.5: Blue LED lights providing ambient illumination.

5. स्थापना

5.1 माउंटिंग स्थान

These speakers are designed for versatile installation in various vehicles and marine craft. Choose a mounting location that is flat, stable, and provides sufficient clearance behind the speaker for wiring and proper air circulation. Ensure the location is protected from direct, prolonged submersion.

आकृती 5.1: उदाamples of suitable installation environments.

5.2 माउंटिंग प्रक्रिया

1. पृष्ठभाग तयार करा: Ensure the mounting surface is clean and free of obstructions.
2. मार्क कटआउट: Use the provided template (if applicable) or measure the speaker dimensions to mark the cutout area. The speaker dimensions are approximately 168mm (6.6 inches) diameter with a mounting depth of 40mm (1.57 inches).
3. कट ओपनिंग: Carefully cut the opening in the mounting surface.
4. स्क्रू होल ड्रिल करा: माउंटिंग स्क्रूसाठी पायलट होल चिन्हांकित करा आणि ड्रिल करा.
5. Install Gasket: Apply the foam gasket around the speaker's edge to ensure a tight seal and reduce vibration.
6. सुरक्षित स्पीकर: Place the speaker into the opening and secure it with the provided screws. Do not overtighten.

Figure 5.2: Speaker installation process.

6. वायरिंग सूचना

Proper wiring is crucial for optimal sound quality and LED functionality. Refer to your audio source's manual for specific wiring diagrams if needed.

• स्पीकर वायरिंग: Connect the included speaker cables to the speaker terminals. Ensure correct polarity (positive to positive, negative to negative) from your amplifier or head unit. The included speaker wires are 9.8 feet long.
• LED Light Wiring: The blue LED lights require a separate power connection. Connect the LED light cables to a 12V DC power source. This allows independent control of the LED lighting.
• इन्सुलेशन: Secure all connections with appropriate electrical tape or heat shrink tubing to prevent short circuits and protect against moisture.

7. ऑपरेशन

Once installed and wired, operating your Herdio marine speakers is straightforward:

• पॉवर चालू: Turn on your audio source (e.g., marine stereo, ampअधिक जिवंत).
• आवाज समायोजित करा: कमी आवाजासह प्रारंभ करा आणि हळू हळू ऐकण्याच्या सोयीस्कर पातळीवर वाढवा.
• एलईडी नियंत्रण: If wired to a separate switch, activate the blue LED lights as desired.
• ऑडिओ स्रोत: Select your preferred audio input on your head unit or ampलाइफायर

8. देखभाल

Regular maintenance ensures the longevity and performance of your speakers:

• स्वच्छता: Clean the speaker grilles and surfaces with a soft, damp कापड. अपघर्षक क्लीनर किंवा सॉल्व्हेंट्स टाळा जे सामग्रीला नुकसान पोहोचवू शकतात.
• तपासणी: Periodically check mounting screws for tightness and wiring connections for corrosion or damage.
• हवामान संरक्षण: Although weather-resistant, covering the speakers when not in use, especially during prolonged storage or harsh weather, can extend their lifespan.

Figure 8.1: All-weather durability comparison.

9. समस्या निवारण

10. तपशील

Figure 10.1: Key technical specifications.

आकृती ८: स्थापनेच्या नियोजनासाठी उत्पादनाचे परिमाण.

11. हमी आणि समर्थन

Herdio products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Herdio website. For technical support, troubleshooting assistance, or replacement parts, please contact Herdio customer service through the contact information provided on the product packaging or the official webसाइट

ऑनलाइन संसाधने: अतिरिक्त समर्थन आणि उत्पादन माहितीसाठी, तुम्ही येथे भेट देऊ शकता Herdio Store on Amazon.