परिचय
This manual provides essential instructions for the safe and efficient operation of your Sonew Jet Dryer Blower. Please read this manual thoroughly before use and retain it for future reference. This device is designed for various drying and clearing tasks, offering powerful performance in a compact form factor.
सुरक्षितता माहिती
To ensure safe operation and prevent damage to the device or injury, observe the following precautions:
- Double Overheat Prevention: The device is equipped with internal sensors to prevent overheating. Do not block air vents during operation.
- Current Prevention: Built-in mechanisms protect against excessive current.
- Short Circuit Prevention: Designed with safeguards against short circuits.
- सक्रिय शीतकरण प्रणाली: The blower utilizes an active cooling system for reliability during extended use.
- Keep hands, hair, and loose clothing away from the air intake and exhaust ports during operation.
- Do not operate in wet conditions or near flammable liquids or gases.
- Use only the provided charging cable. Ensure the power adapter (not included) meets the 20W charging specification.
- Store the device in a dry, cool place, away from direct sunlight and extreme temperatures, when not in use.
- हे डिव्हाइस खेळण्यासारखे नाही. लहान मुलांपासून दूर ठेवा.
पॅकेज सामग्री
पॅकेजमध्ये सर्व वस्तू आहेत का ते तपासा:
- 1 x Sonew Jet Dryer Blower
- 1 x डेटा केबल
- 2 x Instruction Cards (This manual provides comprehensive details)
सेटअप
The Sonew Jet Dryer Blower comes pre-assembled and ready for use after charging. No additional assembly is required.
चार्जिंग सूचना
- Connect the provided data cable to the charging port located on the blower's handle.
- Connect the other end of the data cable to a compatible 20W USB power adapter (not included) or a suitable USB power source.
- The charging indicator light will display लाल while the device is charging.
- When the battery is fully charged, the indicator light will turn निळा.
- पूर्ण चार्ज होण्यासाठी साधारणपणे २.५ तास लागतात.
Note: For optimal battery performance and longevity, it is recommended to fully charge the device before its first use.
ऑपरेटिंग सूचना
पॉवरिंग चालू/बंद
- To power on the blower, press and hold the power button located on the handle until the fan starts.
- To power off, press and hold the power button again until the fan stops completely.
वापर
The Jet Dryer Blower is designed for a variety of applications due to its powerful and focused airflow:
- Vehicle Drying: Efficiently dry vehicle surfaces after washing, preventing water spots.
- धूळ काढणे: Clear dust and debris from electronics, workshops, keyboards, or other hard-to-reach areas.
- बाह्य वापर: Suitable for clearing light snow, leaves, or assisting with campfire ignition.
- Camping/Picnic: Useful for various drying or clearing tasks in outdoor settings.
Direct the nozzle towards the area requiring airflow. Maintain a safe distance from delicate surfaces to avoid damage.
देखभाल
Regular maintenance ensures the longevity and optimal performance of your blower:
- स्वच्छता: Wipe the exterior of the blower with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the device in water.
- एअर व्हेंट्स: Periodically check and clear any dust or debris from the air intake and exhaust vents to ensure unrestricted airflow and prevent overheating. Use a soft brush or compressed air if necessary.
- स्टोरेज: Store the blower in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the battery is partially charged (around 50%) if storing for extended periods.
समस्यानिवारण
If you encounter issues with your Sonew Jet Dryer Blower, refer to the table below for common problems and solutions:
| समस्या | संभाव्य कारण | उपाय |
|---|---|---|
| Blower does not turn on. | बॅटरी कमी किंवा चार्ज नाही. | Charge the device fully. Ensure the power button is pressed and held for a few seconds. |
| Reduced airflow or weak performance. | Blocked air intake/exhaust vents. Low battery. | Clear any debris from the vents. Recharge the device. |
| चार्जिंग इंडिकेटर उजळत नाही. | सदोष चार्जिंग केबल किंवा पॉवर सोर्स. | Try a different USB cable or a known-good 20W power adapter. Ensure connections are secure. |
| Device gets excessively hot. | Blocked vents or prolonged heavy use. | Stop use immediately. Clear vents. Allow device to cool down before resuming operation. If problem persists, contact support. |
तपशील
- साहित्य: Carbon Fiber Composite Material
- बॅटरी प्रकार: लिथियम बॅटरी, ७५०mAh
- शक्ती: 650W
- वाऱ्याचा वेग: 240 किमी/ता
- जोर: 1400 ग्रॅम
- चार्जिंग पॉवर: 20W
- रेट केलेले खंडtage: 16.8V
- वर्तमान: 80A
- Heat Dissipation Mode: Active Heat Dissipation
- सुरक्षितता वैशिष्ट्ये: Double Overheat Prevention, Current Prevention, Short Circuit Prevention
- पूर्ण चार्ज वेळ: अंदाजे 2 तास
- आयटम वजन: Approximately 400g (device only)
- पॅकेज वजन: अंदाजे 888 ग्रॅम
- परिमाण (अंदाजे): 191mm (Height) x 107mm (Width) x 85mm (Nozzle Diameter)
उत्पादन प्रतिमा
हमी आणि समर्थन
For warranty information, technical support, or service inquiries, please refer to the contact details provided with your original purchase documentation. You may also visit the official Sonew webअधिक मदतीसाठी साइट. कोणत्याही वॉरंटी दाव्यांसाठी खरेदीचा पुरावा म्हणून कृपया तुमची खरेदी पावती जपून ठेवा.