शार्कून रिबेल P10 850W ATX 3.1 पॉवर सप्लाय युनिट वापरकर्ता मॅन्युअल

1. परिचय

This manual provides essential information for the safe and efficient use of your Sharkoon Rebel P10 850W ATX 3.1 Power Supply Unit (PSU). The Rebel P10 is designed to deliver reliable and efficient power to your personal computer, supporting the latest ATX 3.1 standard for compatibility with modern graphics cards. It features a quiet 120mm fan with a fluid dynamic bearing and flat cables to optimize airflow within your PC case.

2. सुरक्षितता माहिती

Please read and understand all safety instructions before installing or operating the PSU. Failure to do so may result in personal injury or damage to your equipment.

• विद्युत धोका: The PSU contains high voltage components. Do not open the PSU casing. आत वापरकर्ता-सेवायोग्य भाग नाहीत.
• व्यावसायिक स्थापना: Installation should be performed by a qualified technician or experienced user.
• वायुवीजन: Ensure adequate ventilation around the PSU. Do not block the fan or ventilation openings.
• पर्यावरण: Operate the PSU in a dry, well-ventilated environment, away from moisture, dust, and extreme temperatures.
• ग्राउंडिंग: Always connect the PSU to a grounded power outlet using the provided power cable.
• वीज बंद: Always disconnect the PSU from the mains power before performing any installation, maintenance, or troubleshooting.

3. पॅकेज सामग्री

पॅकेजमध्ये सर्व वस्तू आहेत का ते तपासा:

• Sharkoon Rebel P10 850W ATX 3.1 Power Supply Unit
• एसी पॉवर केबल
• माउंटिंग स्क्रू
• वापरकर्ता मॅन्युअल (हा दस्तऐवज)

4. सेटअप आणि स्थापना

Follow these steps to install your Sharkoon Rebel P10 PSU into your computer system:

1. तुमची प्रणाली तयार करा: Ensure your computer is completely powered off and disconnected from the wall outlet. Open your PC case to access the PSU mounting area.
2. जुने PSU काढून टाका (लागू असल्यास): तुमच्या जुन्या PSU मधून सर्व केबल्स डिस्कनेक्ट करा आणि केसमधून काढा.
3. नवीन PSU बसवा: Carefully place the Sharkoon Rebel P10 into the designated PSU bay in your PC case. Secure it with the provided mounting screws. Ensure the fan faces the correct direction for optimal airflow (typically facing downwards if your case has a bottom vent, or inwards if it's a top-mounted PSU).
   

   प्रतिमा: मुख्य view of the Sharkoon Rebel P10 850W Power Supply Unit. This image shows the primary casing and fan grill, illustrating the unit's compact design for easy installation into a PC chassis.
4. मदरबोर्ड पॉवर कनेक्ट करा: Connect the 24-pin ATX power connector to your motherboard's 24-pin socket. Ensure it clicks securely into place.
5. सीपीयू पॉवर कनेक्ट करा: Connect the 4+4-pin EPS/ATX12V connector(s) to your motherboard's CPU power socket(s).
6. Connect PCIe Power: For graphics cards, connect the appropriate PCIe power connectors (e.g., 6+2-pin) to your graphics card(s). The Rebel P10 supports ATX 3.1, ensuring compatibility with the latest generation of power-hungry GPUs.
   

   Image: A selection of flat cables included with the Sharkoon Rebel P10 850W Power Supply Unit. These flat cables are designed for improved cable management and better airflow within the computer case.

7. Connect Peripheral Power: Connect SATA power connectors to your SSDs, HDDs, and optical drives. Use Molex connectors for any other compatible peripherals. The flat cable design of the Rebel P10 aids in efficient cable routing and improved airflow.
8. केबल व्यवस्थापनः Organize cables neatly to ensure proper airflow and a tidy build.
9. Close Case and Connect AC Power: Close your PC case. Connect the AC power cable to the PSU's power inlet and then to a grounded wall outlet. Ensure the power switch on the PSU is in the 'OFF' position before connecting to the wall outlet.
   

   प्रतिमा: मागचा भाग view of the Sharkoon Rebel P10 850W Power Supply Unit, showing the AC power input and the main power switch. This switch controls the power flow to the unit.

5. ऑपरेटिंग सूचना

Once the PSU is installed and all connections are secure:

1. पॉवर चालू: Flip the power switch on the back of the PSU to the 'ON' position.
2. सिस्टम स्टार्टअप: तुमची सिस्टम सुरू करण्यासाठी तुमच्या संगणकाच्या केसवरील पॉवर बटण दाबा.
3. शांत ऑपरेशन: The Rebel P10 features a 120mm fan with a fluid dynamic bearing, designed for quiet operation even under load.

6. देखभाल

नियमित देखभालीमुळे तुमच्या PSU चे दीर्घायुष्य आणि इष्टतम कार्यप्रदर्शन सुनिश्चित होण्यास मदत होते:

• धूळ काढणे: Periodically clean dust from the PSU's fan and ventilation grilles using compressed air. Ensure the system is powered off and unplugged before cleaning.
• केबल तपासणी: Occasionally check that all power cables are securely connected and not obstructing airflow.
• स्थिर खंडtage: The Rebel P10 utilizes DC/DC technology for optimal and accurate voltage regulation, contributing to system stability.

7. समस्या निवारण

If you encounter issues with your PSU, consider the following:

• शक्ती नाही:
  • एसी पॉवर केबल पीएसयू आणि वॉल आउटलेट दोन्हीशी सुरक्षितपणे जोडलेली आहे याची खात्री करा.
  • PSU च्या मागील बाजूस असलेला पॉवर स्विच 'चालू' स्थितीत आहे का ते तपासा.
  • दुसरे उपकरण प्लग इन करून वॉल आउटलेट तपासा.
  • Ensure all internal power connectors (24-pin, CPU, PCIe) are firmly seated.
• सिस्टम अस्थिरता/क्रॅश:
  • तुमच्या सिस्टमची वीज आवश्यकता PSU च्या 850W क्षमतेपेक्षा जास्त नसल्याची खात्री करा.
  • Verify all components are correctly installed and receiving power.
  • The Rebel P10 includes comprehensive protection features (e.g., overcurrent, overload protection) to prevent damage in case of anomalies. If the PSU shuts down unexpectedly, it might be due to one of these protections activating.
• असामान्य आवाज:
  • Check for any cables or obstructions interfering with the PSU fan.
  • Ensure the PSU is securely mounted to prevent vibrations.

If problems persist, consult a qualified technician or contact Sharkoon support.

8. तपशील

9. हमी आणि समर्थन

Sharkoon products are manufactured to high quality standards and are covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Sharkoon webसाइट

For technical support, troubleshooting assistance, or to inquire about replacement parts, please visit the official Sharkoon support page or contact their customer service department. Contact information can typically be found on the manufacturer's webसाइट:

www.sharkoon.com