GarveeTech One-Piece Elongated Dual Flush Toilet User Manual

1. महत्वाची सुरक्षितता माहिती

Please read this entire manual carefully before installation and use. Failure to follow these instructions could result in property damage, personal injury, or product malfunction.

• Always wear appropriate safety equipment, including safety glasses and gloves, during installation.
• The toilet is heavy. Two people are required to safely unpack and move the product to avoid personal injuries.
• Inspect the toilet for any damage that may have occurred during transit before installation.
• Ensure all plumbing and building codes in your state and local requirements are observed.
• Do not overtighten bolts and nuts during installation to prevent damage to the ceramic.

2. पॅकेज सामग्री

स्थापना सुरू करण्यापूर्वी सर्व घटक उपस्थित आहेत याची खात्री करा.

Image: GarveeTech One-Piece Toilet with its components, including chrome dual push-button, mounting hardware, toilet tank lid, soft-close toilet seat, toilet seat bolt kit, installation instructions, ceramic toilet material, and PP seat cover material.

• One-Piece Toilet Unit
• सॉफ्ट-क्लोज टॉयलेट सीट
• शौचालयाच्या टाकीचे झाकण
• Mounting Hardware (bolts, washers, nuts)
• मेण रिंग गॅस्केट
• इन्स्टॉलेशन सूचना (हे मॅन्युअल)

3. उत्पादन तपशील

Image: Detailed dimensions of the GarveeTech One-Piece Toilet, showing height, width, depth, and seat height measurements.

4. स्थापना पुस्तिका

This section provides step-by-step instructions for installing your GarveeTech One-Piece Toilet. Professional installation is recommended.

4.1 स्थापनेची तयारी

• Ensure the water supply to the bathroom is turned off.
• Remove the old toilet if applicable and clean the flange area thoroughly.
• Gather all necessary tools: wrench, screwdriver, wax ring gasket, mounting bolt kit.

4.2 Toilet Installation Steps

1. Install Mounting Bolts: Lock the mounting bolts into position on the floor flange.
2. Apply Wax Ring Gasket: Apply the wax ring gasket evenly around the rear of the trapway on the bottom of the toilet.
3. शौचालयाची जागा निश्चित करा: Carefully position the toilet onto the floor flange, aligning the bolts with the holes in the toilet base. Gently press down to create a seal with the wax ring.
4. शौचालय सुरक्षित करा: Install the washers and nuts onto the bolts. Tighten the nuts evenly until the toilet is secure, but do not overtighten to avoid cracking the ceramic.
5. पाणी पुरवठा कनेक्ट करा: Connect the supply line to the fill valve at the back of the toilet. Ensure a tight connection to prevent leaks. (Note: Water supply line is not included).
6. Install Side Cover Set: Assemble the side cover caps and attach them to the toilet to conceal the mounting bolts.

4.3 Toilet Seat Installation Steps

1. Attach Seat Cover Hinges: Attach the seat cover hinges to your toilet. Twist the bolt nuts gently. Do not overtighten at this stage, as you may need to adjust them later.
2. Snap Toilet Seat: Snap the new toilet seat over your toilet, aligning the pre-drilled holes on the seat with the hinges.
3. समायोजित करा आणि घट्ट करा: Adjust the nuts as needed to tighten the seat. Once satisfied with the seat's position, you can remove the seat to place the hinge cover on the hinge, then snap the toilet seat over your toilet again so everything is held firmly in place.

5. ऑपरेटिंग सूचना

Your GarveeTech One-Piece Toilet features a dual-flush system designed for water efficiency and powerful cleaning.

5.1 Dual Flush Mechanism

• Partial Flush (0.8 GPF): Press the smaller button on the top of the tank lid for liquid waste. This conserves water.
• पूर्ण फ्लश (१.६ GPF): Press the larger button on the top of the tank lid for solid waste. This provides a powerful flush for effective waste removal.

Image: Visual representation of the powerful flushing system, demonstrating 360-degree cleaning action and improved water spot coverage within the toilet bowl.

5.2 Soft-Closing Seat

The toilet is equipped with a soft-closing seat to prevent slamming and reduce noise. Gently push the seat down, and it will close slowly and quietly on its own.

Image: A visual demonstration of the soft-closing toilet seat, highlighting its quiet operation and noise reduction feature.

6. देखभाल आणि स्वच्छता

Proper maintenance ensures the longevity and hygiene of your toilet.

४.१ शौचालय स्वच्छ करणे

• Use a soft cloth or sponge with a mild, non-abrasive cleaner to clean the exterior and interior surfaces.
• Avoid using harsh chemicals, abrasive pads, or strong acids, as these can damage the ceramic finish and internal components.
• The seamless one-piece design minimizes crevices, making cleaning easier.

Image: A side-by-side comparison illustrating a conventional toilet rim with hidden areas for dirt accumulation versus the GarveeTech toilet's rimless design, which prevents dirt from hiding and simplifies cleaning.

6.2 Seat Maintenance

• Regularly clean the toilet seat with mild soap and water.
• Do not use strong chemical cleaners on the seat, as they may cause discoloration or damage to the polypropylene material.
• The soft-close hinges can be gently wiped clean.

7. समस्या निवारण

हा विभाग तुमच्या शौचालयाबाबत येणाऱ्या सामान्य समस्यांबद्दल चर्चा करतो.

७. वॉरंटी आणि ग्राहक समर्थन

GarveeTech stands behind the quality of its products. This toilet comes with a standard manufacturer's warranty covering defects in materials and workmanship under normal use.

For specific warranty details, claims, or technical assistance, please contact GarveeTech customer support. Have your model number (p0ItldkTNt5ZlEMFpXqu_ArcS) and purchase information ready when contacting support.

You can typically find contact information on the GarveeTech webसाइटवर किंवा तुमच्या किरकोळ विक्रेत्याद्वारे.