1. परिचय
This manual provides detailed instructions for the installation, operation, and maintenance of your EPEVER Tracer2210AN-G3 20A MPPT Solar Charge Controller. This device is designed to efficiently manage power flow from solar panels to various battery types, including lead-acid and lithium batteries.
मुख्य वैशिष्ट्यांचा समावेश आहे:
- Advanced MPPT technology with efficiency no less than 99.5%.
- स्वयंचलित १२V/२४V सिस्टम व्हॉल्यूमtagई ओळख.
- कमाल पीव्ही इनपुट व्हॉल्यूमtag100V चा e.
- Support for Gel, AGM, Flooded, Sealed, and Lithium (LiFePO4, Li(NiCoMn)O2) batteries.
- सामान्य नकारात्मक ग्राउंडिंग डिझाइन.
- RS-485 communication bus interface with Modbus protocol for monitoring and parameter setting via mobile app or PC software.
- Charging power and current limitation function.
- Real-time energy statistics function and overheating power reduction.
Figure 1.1: EPEVER Tracer2210AN-G3 20A MPPT Solar Charge Controller with LCD display.
2. सेटअप आणि स्थापना
Proper installation is crucial for optimal performance and safety. Follow the connection order carefully.
2.1 Connection Order
Connect the system components in the following sequence:
- बॅटरी: बॅटरी चार्ज कंट्रोलरशी कनेक्ट करा.
- PV Panel: Connect the solar PV panel to the charge controller.
- लोड: Connect the DC load to the charge controller.
To disconnect the system, reverse the order: Load → PV Panel → Battery.
Figure 2.1: Diagram illustrating the correct connection order for the solar charge controller, battery, PV panel, and DC load.
2.2 No-Battery Mode and Battery Mode
The Tracer-AN G3 series supports operation with or without a battery, depending on the inverter type and power requirements.
Figure 2.2: Connection diagrams for operating the solar charge controller in no-battery mode (top) and battery mode (bottom).
No-Battery Mode Warning: When operating without a battery, ensure the inverter is connected directly to the controller's battery terminals. For high-frequency inverters, PV input power must be greater than (load output power ÷ inverter conversion efficiency ÷ controller conversion efficiency). For power frequency inverters, PV input power must be greater than (load output power ÷ inverter conversion efficiency ÷ controller conversion efficiency ÷ 2).
६.३ तापमान सेन्सर कनेक्शन
Connect the remote temperature sensor probe to the designated port on the controller. This ensures accurate temperature compensation for charging parameters, optimizing battery life.
Video 2.1: Demonstrates the unboxing, overview of components, and basic installation steps for the Tracer-AN controller, including connecting the temperature sensor.
3. ऑपरेटिंग सूचना
The controller features an LCD display and buttons for easy configuration and monitoring.
३.३.२ बॅटरी प्रकार सेट करणे
To ensure proper charging, configure the battery type on the controller:
- Press and hold the "ENTER" button for 5 seconds under the battery voltagई इंटरफेस.
- Press the "SELECT" button when the battery type interface is flashing to cycle through available types.
- Press the "ENTER" button to confirm the selected battery type.
Figure 3.1: LCD display showing battery type selection options.
समर्थित बॅटरी प्रकार:
- Lead-acid: Sealed (default), Gel, Flooded, User-defined.
- लिथियम: LiFePO4 (4s/8s), Li(NiCoMn)O2 (3s/6s/7s), User-defined.
3.2 Setting Load Mode
The controller offers multiple load working modes. To set the load mode:
- Press and hold the "ENTER" button for 5 seconds under the load mode interface.
- Press the "SELECT" button when the load mode interface is flashing to cycle through options.
- Press the "ENTER" button to confirm the desired load mode.
मॅन्युअल नियंत्रण मोड: When you press the ENTER button, the load will open; press ENTER again, the load will close.
3.3 Load Working Modes
| ३.५** | टाइमर 1 | ३.५** | टाइमर 2 |
|---|---|---|---|
| 100 | लाईट चालू/बंद | 2n | अक्षम |
| 101 | सूर्यास्तापासून 1 तास लोड सुरू असेल | 201 | सूर्योदयापूर्वी १ तास भारनियमन सुरू राहील |
| 102 | सूर्यास्तापासून 2 तास भारनियमन सुरू राहील | 202 | सूर्योदयापूर्वी 2 तास भारनियमन सुरू राहील |
| 103-113 | Load will be on for 3 ~ 13 hours since sunset | 203-213 | सूर्योदयापूर्वी 3 ~ 13 तास लोड चालू असेल |
| 114 | सूर्यास्तापासून 14 तास भारनियमन सुरू राहील | 204 | सूर्योदयापूर्वी 14 तास भारनियमन सुरू राहील |
| 115 | सूर्यास्तापासून 15 तास भारनियमन सुरू राहील | 205 | सूर्योदयापूर्वी 15 तास भारनियमन सुरू राहील |
| 116 | चाचणी मोड | 2n | अक्षम |
| 117 | मॅन्युअल मोड (डीफॉल्ट लोड चालू) | अक्षम |
५.८. ॲक्सेसरीज
The EPEVER Tracer2210AN-G3 controller supports various accessories for enhanced monitoring and control:
Figure 4.1: Diagram showing the EPEVER Tracer2210AN-G3 controller and compatible accessories.
- Remote Temperature Sensor (RTS300R47K3.81A): Acquires battery temperature for compensation of control parameters. Standard cable length is 3m.
- USB to RS485 Cable (CC-USB-RS485-150U): Used to monitor and set parameters via PC software (Solar Station PC software). Cable length is 1.5m.
- Remote Meter (MT50): Displays various operating data and system faults. Features easy-to-operate buttons and a numeric display.
- WiFi Serial Adapter (eBox-WiFi-01): For monitoring and setting parameters via mobile APP software through WiFi signals.
- RS485 to Bluetooth Adapter (eBox-BLE-01): For monitoring and setting parameters via mobile APP software through Bluetooth signals.
- Logger (eLOG01): Records real-time operating status of the controller.
व्हिडिओ १: एक षटकview of the EPEVER G3 Version TracerAN MPPT Solar Charge Controller, highlighting its features and accessories.
5. तपशील
5.1 यांत्रिक मापदंड
| आयटम | ट्रेसर 1210 एएन | ट्रेसर 2210 एएन | ट्रेसर 3210 एएन | ट्रेसर 4210 एएन |
|---|---|---|---|---|
| परिमाण | 172x139x44 मिमी | 220x154x52 मिमी | 228x164x55 मिमी | 252x180x63 मिमी |
| माउंटिंग आयाम | 130x130 मिमी | 170x145 मिमी | 170x164 मिमी | 210x171 मिमी |
| माउंटिंग होल आकार | Φ5 मिमी | |||
| टर्मिनल | 12AWG(4 मिमी²) | 6AWG(16 मिमी²) | 6AWG(16 मिमी²) | 6AWG(16 मिमी²) |
| शिफारस केलेली केबल | 12AWG(4 मिमी²) | 10AWG(6 मिमी²) | 8AWG(10 मिमी²) | 6AWG(16 मिमी²) |
| वजन | 0.57 किलो | 0.94 किलो | 1.26 किलो | 1.65 किलो |
| प्रमाणन | CE IEC62109 | |||
5.2 Electrical Parameters (Tracer2210AN)
| आयटम | ट्रेसर 1210 एएन | ट्रेसर 2210 एएन | ट्रेसर 3210 एएन | ट्रेसर 4210 एएन |
|---|---|---|---|---|
| प्रणाली नाममात्र खंडtage | 12/24 व्हीडीसीओ ऑटो | |||
| रेट केलेले चार्ज वर्तमान | 10A | 20A | 30A | 40A |
| रेटेड डिस्चार्ज वर्तमान | 10A | 20A | 30A | 40A |
| बॅटरी व्हॉल्यूमtagई श्रेणी | 8~32V | |||
| कमाल पीव्ही ओपन सर्किट व्हॉल्यूमtage | 100V① | 92V② | ||
| एमपीपी खंडtagई श्रेणी | (बॅटरी व्हॉल्यूमtage +2V)~72V | |||
| कमाल पीव्ही इनपुट पॉवर | 130W/12V 260W/24V | 260W/12V 520W/24V | 390W/12V 780W/24V | 520W/12V 1040W/24V |
| स्व-उपभोग | ≤12mA | |||
| डिस्चार्ज सर्किट व्हॉल्यूमtagई ड्रॉप | ≤0.23V | |||
| तापमान गुणांक भरपाई करते③ | -3 एमव्ही / ℃ / 2 व्ही (डीफॉल्ट) | |||
| ग्राउंडिंग | सामान्य नकारात्मक | |||
| RS485 इंटरफेस | 5 वीडीसी / 100 एमए | |||
| एलसीडी बॅकलाइट वेळ | 60 एस (डीफॉल्ट) | |||
| कार्यरत वातावरणाचे तापमान④ | -25℃～+50℃ (100% input and output) | |||
| स्टोरेज तापमान श्रेणी | -20℃～+70℃ | |||
| सापेक्ष आर्द्रता | ≤95%, NC | |||
| संलग्न | IP30 | |||
①When a lead-acid battery is used, the controller hasn't the low temperature protection.
②किमान ऑपरेटिंग वातावरण तापमानात
③25 ℃ पर्यावरण तापमानात
④When a lithium-ion battery is used, the system voltage can't be identified automatically.
6. देखभाल
To ensure the longevity and optimal performance of your EPEVER Tracer2210AN-G3 MPPT Solar Charge Controller, regular maintenance is recommended. Please refer to the full product manual for detailed maintenance procedures. Key maintenance aspects typically include:
- Periodically inspect all wiring and connections for tightness and corrosion.
- Ensure the controller's heat sink is free from dust and debris to maintain proper cooling.
- Verify that the ventilation around the controller is unobstructed.
- Check the battery terminals for any signs of wear or damage.
- Monitor the system's performance regularly via the LCD display or connected monitoring software/app to detect any anomalies.
7. समस्या निवारण
If you encounter any issues with your EPEVER Tracer2210AN-G3 MPPT Solar Charge Controller, please refer to the comprehensive troubleshooting guide in the full product manual. Common issues and their solutions are typically covered, including:
- LCD display not lighting up or showing incorrect readings.
- Battery not charging or overcharging.
- Load not functioning correctly.
- Error codes or warning indicators on the display.
For complex issues or if problems persist, please contact customer support.
8. हमी आणि समर्थन
EPEVER products are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or contact the seller.
Authorized Supplier: GolandCentury is an authorized supplier for the EPEVER brand. Our engineers are available to provide technical support and assistance with your solar system setup.
For technical inquiries or support, please reach out to GolandCentury's service centers.
