क्रिएवर्क्स मिनी मेटल लेथ ९" x ३०" सूचना पुस्तिका

1. परिचय

Thank you for choosing the CREWORKS 9" x 24" Mini Metal Lathe. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your new machine. Please read this manual thoroughly before operating the lathe to ensure proper use and to prevent injury or damage.

Figure 1.1: CREWORKS 9" x 24" Mini Metal Lathe with included accessories.

2. सुरक्षितता सूचना

Always prioritize safety when operating machinery. Failure to follow these instructions may result in serious injury or death.

• मॅन्युअल वाचा: ऑपरेशन करण्यापूर्वी सर्व सूचना आणि इशारे समजून घ्या.
• वैयक्तिक संरक्षणात्मक उपकरणे (PPE): Always wear safety glasses or a face shield. Use hearing protection. Do not wear loose clothing, gloves, ties, or jewelry that can get caught in moving parts. Tie back long hair.
• कार्य क्षेत्र: Keep the work area clean, well-lit, and free from clutter. Ensure adequate space around the machine.
• मशीनची स्थिती: Inspect the lathe for damage or loose parts before each use. Do not operate if damaged.
• वीज कनेक्शन: Ensure the machine is properly grounded. Disconnect power before making adjustments, changing tools, or performing maintenance.
• वर्कपीस सुरक्षा: नेहमी खात्री करा की वर्कपीस सुरक्षितपणे घट्ट बसली आहेamped in the chuck or collet.
• चिप काढणे: Never remove chips by hand while the machine is running. Use a brush or hook.
• आपत्कालीन थांबा: आपत्कालीन स्टॉप बटणाचे स्थान आणि ऑपरेशन जाणून घ्या.
• पर्यवेक्षण: मशीन चालू असताना कधीही लक्ष न देता सोडू नका.

आकृती 2.1: ओव्हरview of the lathe components, including the emergency stop button.

३. घटक आणि नियंत्रणे

Understanding the various parts of your lathe is crucial for effective and safe operation.

3.1 मुख्य घटक

• हेडस्टॉक: Houses the main spindle, motor, and gear train.
• चक: Holds the workpiece securely. The CREWORKS lathe features a 3-jaw chuck.
• वाहून नेणे: Moves along the bed, carrying the cross slide and tool post.
• Cross Slide: Moves perpendicular to the bed, allowing for facing operations.
• Compound Rest: Rotates and slides to allow for angled cuts and fine adjustments.
• टूल पोस्ट: Holds the cutting tools.
• टेलस्टॉक: Supports the end of long workpieces or holds drilling/reaming tools.
• पलंग: The main frame of the lathe, providing precision guide rails for the carriage and tailstock.
• आघाडी स्क्रो: स्वयंचलित फीडिंग आणि थ्रेडिंग ऑपरेशन्ससाठी वापरले जाते.

3.2 नियंत्रणे

• Power and Emergency Stop: Main power switch and immediate shutdown button.
• फॉरवर्ड/रिव्हर्स स्विच: Controls spindle rotation direction.
• गती समायोजन नॉब: Varies the spindle speed.
• Digital Speed Display: Shows the current spindle RPM.
• Carriage Handwheel: Manual movement of the carriage along the bed.
• Cross Slide Handwheel: Manual movement of the cross slide.
• Compound Control Wheel: Manual movement of the compound rest.
• Tail Feed Handwheel: Advances the tailstock quill.
• Half Nut Lever: Engages the lead screw for threading.

Figure 3.1: Detailed diagram showing the main components and controls of the lathe.

Figure 3.2: The digital display provides real-time spindle speed readings.

Figure 3.3: The 5-inch 3-jaw chuck is adaptable for various workpiece sizes.

4. सेटअप

4.1 अनपॅकिंग आणि प्लेसमेंट

1. Carefully remove the lathe and all accessories from the packaging. Retain packaging for future transport or storage.
2. Clean off any protective grease or oil from the machine surfaces using a suitable degreaser.
3. Place the lathe on a sturdy, level workbench capable of supporting its weight (approximately 159 lbs / 72 kg). Ensure the workbench is stable and does not wobble.
4. Secure the lathe to the workbench using appropriate fasteners through the mounting holes in the base.

4.2 प्रारंभिक धनादेश

• Verify all moving parts move freely without excessive play or binding.
• सर्व फास्टनर्स घट्ट असल्याचे तपासा.
• Ensure the chuck guard is properly installed and functions correctly.
• पॉवर कॉर्डला ग्राउंड केलेल्या इलेक्ट्रिकल आउटलेटशी जोडा.

5. ऑपरेशन

5.1 मूलभूत ऑपरेशन

1. पॉवर चालू: Turn on the main power switch. The digital display should illuminate.
2. Workpiece Mounting: Open the chuck jaws using the chuck key. Insert the workpiece, ensuring it is securely centered and clamped. Remove the chuck key before starting the machine.
3. साधन स्थापना: Loosen the tool post locking screw. Insert the cutting tool, ensuring it is at the correct height relative to the workpiece center. Tighten the locking screw.
4. गती समायोजन: Use the speed adjustment knob to set the desired spindle RPM. The digital display will show the current speed. The lathe supports speeds from 0 to 3000 rpm.
5. Spindle Direction: Select forward or reverse rotation using the direction switch.
6. Engage Feed: For manual operation, use the carriage, cross slide, and compound handwheels. For automatic feed or threading, engage the half-nut lever (refer to threading charts for gear setup).
7. कटिंग: Slowly advance the cutting tool into the workpiece. Monitor the cut and adjust feed rate as needed.
8. वीज बंद: After completing the operation, turn off the spindle, then the main power switch.

5.2 अर्ज

This mini metal lathe is versatile and can perform various operations on materials such as wood, plastics, brass, and aluminum.

• वळणे: वर्कपीसचा व्यास कमी करणे.
• समोरासमोर: Creating a flat surface on the end of a workpiece.
• ड्रिलिंग: Creating holes along the center axis using the tailstock.
• थ्रेडिंग: Cutting external or internal threads.
• कटिंग: Parting off sections of material.

Figure 5.1: The lathe is suitable for a wide range of metalworking and other material applications.

6. देखभाल

Regular maintenance ensures the longevity and precision of your CREWORKS Mini Metal Lathe.

6.1 स्वच्छता

• प्रत्येक वापरानंतर, मशीनमधील सर्व चिप्स आणि कचरा, विशेषतः बेडवेज, लीड स्क्रू आणि चकमधून स्वच्छ करा. ब्रश किंवा शॉप व्हॅक्यूम वापरा.
• स्वच्छ कापडाने सर्व पृष्ठभाग पुसून टाका.

6.2 स्नेहन

• Regularly apply a thin coat of machine oil to the bedways, lead screw, and other sliding surfaces to prevent rust and ensure smooth operation.
• Consult the lubrication points diagram (if available in a more detailed manual) for specific oiling requirements.

6.3 Adjustments and Inspections

• Periodically check the tension of the drive belts.
• Inspect the chuck jaws for wear or damage.
• Ensure the tailstock is aligned correctly.
• Check the condition of the metal gear set for any signs of wear or damage.

Figure 6.1: The dual V-shaped guide rails require regular cleaning and lubrication for smooth and precise operation.

Figure 6.2: The metal gear set ensures strong and efficient power transmission and should be inspected periodically.

7. समस्या निवारण

This section addresses common issues you might encounter with your lathe.

8. तपशील

Technical specifications for the CREWORKS 9" x 24" Mini Metal Lathe.

Figure 8.1: Visual representation of key specifications and dimensions.

9. हमी आणि समर्थन

For warranty information or technical support, please refer to the contact details provided at the point of purchase or visit the official CREWORKS webसाइट

• ग्राहक समर्थन: For assistance with product issues, setup, or operation, please contact CREWORKS customer service.
• परतावा: या उत्पादनामध्ये सामान्यतः ३० दिवसांची सोपी परतफेड धोरण असते. विशिष्ट अटींसाठी कृपया तुमचे खरेदी तपशील तपासा.

टीप: Any unauthorized modifications or repairs to the machine may void the warranty.