सेना १०एस मोटरसायकल ब्लूटूथ हेडसेट कम्युनिकेशन सिस्टम वापरकर्ता मॅन्युअल

1. उत्पादन संपलेview

The Sena 10S Bluetooth motorcycle headset and intercom system kit is designed to facilitate seamless communication among riders. It supports full duplex, dual pairing for clear and natural conversations.

प्रमुख वैशिष्ट्ये:

• Bluetooth 4.1 and Universal Intercom for broad compatibility.
• Crystal-clear HD audio with Advanced Noise Control for superior sound quality.
• Intercom communication range of up to 1.6 km (1.0 mi) in open terrain.
• Supports up to 4 riders for group communication.
• Smartphone pairing for music, GPS navigation, and phone calls.
• Talk time of 12 hours on a single charge.

आकृती 1.1: समोर view of the Sena 10S Motorcycle Bluetooth Headset.

2. पॅकेज सामग्री

The Sena 10S Communication System package typically includes the following items:

• Sena 10S Headset Unit(s)
• स्पीकर सेट
• बूम मायक्रोफोन
• वायर्ड मायक्रोफोन
• माउंटिंग सीएलamp किट
• यूएसबी पॉवर आणि डेटा केबल
• ऑडिओ केबल
• स्पीकर्ससाठी वेल्क्रो पॅड
• मायक्रोफोन स्पंज

Figure 2.1: All components included in the Sena 10S package.

3. सेटअप आणि स्थापना

3.1 डिव्हाइस चार्ज करणे

Before initial use, fully charge the Sena 10S headset. Connect the provided USB power & data cable to the headset's charging port and a USB power source. A full charge typically takes approximately 3 hours. The LED indicator will change color to indicate charging status.

आकृती 3.1: बाजू view of the Sena 10S unit, showing the USB charging port.

3.2 Mounting on a Helmet

The Sena 10S can be mounted on most motorcycle helmets using the included clamp kit. Follow these general steps:

1. सीएलच्या मागील बाजूस असलेले स्क्रू सोडवाamp युनिट
2. cl स्लाइड कराamp unit between the outer shell and the inner padding of your helmet, positioning it on the left side.
3. क्लॅम्प सुरक्षित करण्यासाठी स्क्रू घट्ट कराamp.
4. Attach the main headset unit to the clamp.
5. Install the speakers inside the helmet, aligning them with your ears. Use the Velcro pads if necessary.
6. Connect the microphone (boom or wired) to the headset unit and position it appropriately for clear voice pickup.

Figure 3.2: Sena 10S headset mounted on a motorcycle helmet.

4. ऑपरेटिंग सूचना

4.1 पॉवर चालू/बंद

• पॉवर चालू: Press and hold the Phone Button and the Jog Dial for 1 second.
• वीज बंद: Tap the Phone Button and the Jog Dial simultaneously.

4.2 आवाज नियंत्रण

Rotate the Jog Dial clockwise to increase volume and counter-clockwise to decrease volume.

4.3 Bluetooth Pairing (Smartphone)

To pair your smartphone with the Sena 10S for music, GPS, and phone calls:

1. With the headset off, press and hold the Phone Button for 5 seconds until the LED flashes red and blue alternately.
2. तुमच्या स्मार्टफोनवर, ब्लूटूथ सक्षम करा आणि डिव्हाइस शोधा.
3. Select 'Sena 10S' from the list of found devices.
4. If prompted, enter '0000' for the PIN.

४.३ इंटरकॉम कम्युनिकेशन

The Sena 10S supports intercom communication with up to 4 riders. Ensure all devices are powered on and within range.

• Pairing with another Sena headset: Press and hold the Jog Dial of both units for 5 seconds until the LEDs flash red. Tap the Jog Dial on either unit to complete pairing.
• इंटरकॉम सुरू करणे/समाप्त करणे: Tap the Jog Dial once to start or end a conversation with the first paired intercom friend. Tap twice for the second, and three times for the third.

4.5 Music Streaming and Phone Calls

• संगीत प्ले/पॉज करा: जोग डायल 1 सेकंदासाठी दाबा आणि धरून ठेवा.
• उत्तर द्या/कॉल संपवा: फोन बटणावर टॅप करा.
• व्हॉइस डायल: 3 सेकंदांसाठी फोन बटण दाबा आणि धरून ठेवा.

5. देखभाल आणि काळजी

To ensure the longevity and optimal performance of your Sena 10S headset, follow these maintenance guidelines:

• उपकरण कोरडे ठेवा. ओलावा अंतर्गत सर्किट्सना नुकसान पोहोचवू शकतो.
• डिव्हाइस स्वच्छ करण्यासाठी कठोर रसायने, क्लिनिंग सॉल्व्हेंट्स किंवा मजबूत डिटर्जंट वापरू नका.
• Clean the microphone and speaker grilles gently with a soft, dry cloth.
• वापरात नसताना यंत्र थंड, कोरड्या जागी साठवा.
• बॅटरीचे आरोग्य राखण्यासाठी, वापरात नसले तरीही, नियमितपणे बॅटरी चार्ज करा.

6. समस्या निवारण

If you encounter issues with your Sena 10S, try the following steps:

• शक्ती नाही: Ensure the battery is charged. Connect to a power source and check if the charging indicator lights up.
• आवाज नाही/कमी आवाज: Check volume settings on both the headset and your connected device. Ensure speakers are correctly positioned.
• इंटरकॉम कनेक्ट होत नाही: Verify both units are powered on and within range. Re-attempt intercom pairing.
• ब्लूटूथ डिस्कनेक्शन: Ensure your paired device is within range. Try re-pairing the device.
• डिव्हाइस रीसेट करणे: If issues persist, perform a factory reset (refer to the full user manual for specific instructions on your model).

7. तांत्रिक तपशील

९. अधिकृत उत्पादन व्हिडिओ

9. हमी आणि समर्थन

For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Sena website. For technical support, troubleshooting assistance, or further inquiries, please contact Sena customer service through their official channels.