JONSBO N2 NAS ITX केस वापरकर्ता मॅन्युअल

1. परिचय

This manual provides detailed instructions for the installation, operation, and maintenance of your JONSBO N2 NAS ITX Case. The JONSBO N2 is a compact aluminum chassis designed for Network Attached Storage (NAS) or mini PC builds, supporting up to five 3.5-inch hard disk drives and one 2.5-inch solid-state drive.

Image 1.1: JONSBO N2 NAS ITX Case with internal drive bays highlighted.

2. सेटअप आणि स्थापना

Follow these steps to assemble your JONSBO N2 NAS ITX Case with your components.

2.1. तयारी

Before beginning, ensure you have the following components:

• ITX मदरबोर्ड
• SFX Power Supply (maximum 150mm length)
• 3.5-inch Hard Disk Drives (up to 5)
• 2.5-inch Solid State Drive (1)
• कमी प्रोfile PCI Expansion Card (optional, maximum 197mm length)
• CPU Cooler (maximum 65mm height)
• स्क्रू ड्रायव्हर सेट
• Cable ties for management

३.१. केस वेगळे करणे

The JONSBO N2 features a removable top cover and a magnetic front panel for easy access.

1. Gently pull the magnetic front panel to detach it from the chassis.
2. Remove the screws securing the top cover and slide it off to expose the motherboard tray.

Image 2.1: Front panel removed, showing drive bays.

३.२. मदरबोर्ड आणि सीपीयू कूलरची स्थापना

1. Install your ITX motherboard onto the motherboard tray using the provided standoffs and screws.
2. Install your CPU cooler. Ensure its height does not exceed 65mm to allow the top cover to close properly.

2.4. वीज पुरवठा स्थापना

1. Mount the SFX power supply into its designated bracket. The power supply should not exceed 150mm in length.
2. स्क्रूसह वीज पुरवठा सुरक्षित करा.

2.5. ड्राइव्ह स्थापना

The JONSBO N2 supports five 3.5-inch hot-swappable HDDs and one 2.5-inch SSD.

1. 3.5-inch HDDs: Attach the provided handles and rubber slides to each 3.5-inch HDD. Slide each drive into an available hot-swappable bay until it clicks into place.
2. 2.5-inch SSD: Mount the 2.5-inch SSD in its dedicated slot, typically located behind the motherboard tray or within the drive cage structure.
3. Connect SATA data and power cables to all installed drives.

प्रतिमा २: स्फोट झाला view illustrating component and drive installation.

५.४. विस्तार कार्डची स्थापना

If using a low-profile PCI expansion card:

1. Remove the appropriate PCI slot cover from the rear of the case.
2. Insert the low-profile expansion card into the motherboard's PCI-E slot. The card length must not exceed 197mm.
3. कार्ड स्क्रूने सुरक्षित करा.

2.7. Front Panel and Cooling Connections

1. Connect the front panel headers (USB 3.2 Gen2 Type-C, USB 3.0, Audio+Mic, Power/Reset) to the corresponding pins on your motherboard.
2. Ensure the pre-installed rear 120mm fan is connected to a fan header on your motherboard for proper cooling.

2.8. Cable Management and Reassembly

1. Route all cables neatly to ensure optimal airflow and prevent interference with components. Use cable ties as needed.
2. Slide the top cover back into place and secure it with screws.
3. Reattach the magnetic front panel.

3. ऑपरेटिंग सूचना

3.1. पॉवर चालू/बंद

Press the power button located on the front panel to turn the system on or off. Follow your operating system's shutdown procedures for safe power-off.

3.2. Hot-Swapping Drives

The JONSBO N2 supports hot-swapping for its 3.5-inch HDD bays. Ensure your motherboard and operating system are configured to support hot-swapping before attempting this procedure.

1. Safely eject the drive from your operating system.
2. Gently pull the handle of the desired drive bay to release and remove the drive.
3. Insert a new 3.5-inch HDD into the empty bay, ensuring it slides in smoothly until it locks into place.
4. The operating system should detect the new drive.

4. देखभाल

Regular maintenance helps ensure the longevity and optimal performance of your JONSBO N2 case and its components.

७.२. साफसफाई

1. बाह्य: Wipe the aluminum exterior with a soft, damp कापड अपघर्षक क्लीनर टाळा.
2. धूळ फिल्टर: The case includes dust filters. Periodically remove and clean them with water or compressed air. Ensure they are completely dry before reinstallation.
3. अंतर्गत घटक: Use compressed air to gently remove dust from internal components, especially the fan blades and heatsinks. Perform this with the system powered off and unplugged.

Image 4.1: Rear fan and filter assembly.

४.१.७. वायुवीजन

Ensure that all ventilation grilles on the case are unobstructed to maintain proper airflow and prevent overheating. Avoid placing the case in enclosed spaces without adequate air circulation.

Image 4.2: Product details including ventilation grille and rear fan.

5. समस्या निवारण

This section addresses common issues you might encounter with your JONSBO N2 case.

5.1. शक्ती नाही

• Verify that the power supply is securely connected to the wall outlet and the motherboard.
• Check that the front panel power button header is correctly connected to the motherboard.
• Ensure the power supply unit (PSU) switch is in the 'ON' position.

६.३. जास्त पंख्याचा आवाज

• Check if the fan blades are obstructed by cables or dust.
• पंखा सुरक्षितपणे बसवला आहे आणि केसच्या विरुद्ध कंपन करत नाही याची खात्री करा.
• If the stock 120x15mm fan is too loud, consider replacing it with a quieter aftermarket fan of the same dimensions.

६.१. ड्राइव्ह आढळला नाही

• Ensure all SATA data and power cables are securely connected to both the drives and the motherboard/PSU.
• For 3.5-inch HDDs, confirm they are fully seated in their hot-swappable bays.
• Check your motherboard's BIOS/UEFI settings to ensure SATA ports are enabled.

5.4. ओव्हरहाटिंग

• Verify that the rear 120mm fan is operating correctly.
• हवेच्या प्रवाहात अडथळा कमी करण्यासाठी केबल व्यवस्थापन सुधारा.
• Ensure the case's ventilation grilles are clear of obstructions.

6. तपशील

Detailed technical specifications for the JONSBO N2 NAS ITX Case:

Image 6.1: Chassis parameters and dimensions.

7. हमी आणि समर्थन

JONSBO products are manufactured to high-quality standards. For specific warranty information regarding your JONSBO N2 NAS ITX Case, please refer to the warranty card included with your purchase or visit the official JONSBO webसाइट

If you encounter any issues or require technical assistance, please contact JONSBO customer support through their official channels. Provide your product model (N2) and a detailed description of the issue for efficient service.