1. परिचय आणि ओव्हरview
The Enthuze ENT-TD6000 is a versatile device designed to provide emergency jump-starting for vehicles, inflate tires, and serve as a portable power bank. It also includes integrated LED light functions for various situations.
मुख्य वैशिष्ट्यांचा समावेश आहे:
- Inflatable Function: Capable of inflating car tires, motorcycle tires, bicycle tires, air mattresses, water toys, and sports balls.
- Car Jump Start: Designed to jump-start 12V vehicle batteries using the included cables.
- मोबाईल पॉवर सप्लाय: Can charge/power cell phones, tablets, game consoles, cameras, and other digital smart devices.
- एलईडी लाईटची कार्ये: Features multiple LED light modes for illumination and signaling.
Figure 1: Enthuze ENT-TD6000 Jump Starter and included accessories.
५. सेटअप आणि प्रारंभिक वापर
2.1 डिव्हाइस चार्ज करणे
Before first use, fully charge the Enthuze ENT-TD6000. Connect the device to a suitable power source using the provided USB-C cable. The display will indicate the charging status. A full charge typically takes approximately 3.5 hours.
2.2 Connecting Jump Start Cables
To prepare for jump-starting, ensure the jump starter is adequately charged. Connect the smart battery clamp to the jump starter's designated port. The device will indicate readiness.
Video 1: Demonstration of connecting the smart battery clamp and jump-starting a vehicle.
3. ऑपरेटिंग सूचना
3.1 वाहन सुरू करून उडी मारणे
- जंप स्टार्टर पूर्णपणे चार्ज झाला आहे याची खात्री करा.
- स्मार्ट बॅटरी cl कनेक्ट कराamp to the jump starter.
- लाल (+) cl संलग्न कराamp to the positive terminal of the vehicle's battery.
- काळा (-) cl संलग्न कराamp to the negative terminal of the vehicle's battery or a solid, unpainted metal part of the engine block.
- Press the switch button on the jump starter to activate the jump-start function.
- Start the vehicle's engine.
- Once the vehicle starts, immediately remove the clamps from the vehicle battery, then disconnect the smart battery clamp जंप स्टार्टर पासून.
This device is suitable for jump-starting vehicles with up to 8.0L gasoline engines and 6.0L diesel engines, including small cars, SUVs, pickup trucks, motorcycles, and boats.
७.२ एअर कंप्रेसर वापरणे
- Screw the air hose into the designated port on the jump starter.
- Connect the other end of the air hose to the tire valve or the item to be inflated.
- Use the '+' or '-' buttons to set the desired air pressure.
- Press and hold the switch button for 3 seconds to start the inflation process.
- The device will automatically stop when the set pressure is reached.
- Disconnect the air hose from the item and the jump starter.
६.२ पॉवर बँक म्हणून वापरणे
The Enthuze ENT-TD6000 features USB output ports to charge various electronic devices:
- यूएसबी आउटपुट 1: 5V=3A, 9V=2A, 12V=1.5A
- यूएसबी आउटपुट 2: 5V=2.1A
Connect your device to the appropriate USB port using a compatible charging cable.
३.१ एलईडी लाईट फंक्शन्स
The device includes multiple LED light modes:
- स्थिर प्रकाश: सामान्य प्रकाशयोजनेसाठी.
- SOS मोड: आपत्कालीन सिग्नलिंगसाठी.
- स्ट्रोब लाइट: For attracting attention.
Press the light button to cycle through the different modes.
4. देखभाल
To ensure the longevity and optimal performance of your Enthuze ENT-TD6000, follow these maintenance guidelines:
- नियमित चार्जिंग: Recharge the device every 3-6 months, even if not in use, to maintain battery health.
- स्टोरेज: Store the device in a cool, dry place. The recommended storage temperature should not be lower than -10°C or higher than 50°C. Extreme temperatures can shorten the product's life and damage the built-in battery.
- स्वच्छता: Use a soft, dry cloth to clean the exterior of the device. Do not use harsh chemicals or abrasive materials.
- केबल तपासणी: Periodically inspect the jump start cables and air hose for any signs of wear, damage, or corrosion. Replace if necessary.
Figure 2: Product with accessories and important warnings.
5. समस्या निवारण
सामान्य समस्या आणि त्यांचे निराकरण यासाठी खालील तक्ता पहा:
| त्रुटी संदेश | कारण | उपाय |
|---|---|---|
| एरर | Jumper cables connected with reversed polarity to the car battery. | बॅटरी cl कनेक्ट कराamps to the correct positive and negative terminals. |
| कमी | योग्यरित्या जोडलेली कार बॅटरी, पण बॅटरी व्हॉल्यूमtage is below 9V, and the core temperature is above 0°C/32°F. | BOOST button for 2 seconds to use the forced boost function. |
| बाहेर आत | High-temperature protection activated, displaying core temperature overheating. | The product activates temperature protection below 50°C/122°F and resumes output when the temperature drops to 45°C/113°F. |
| IN | Low-temperature protection activated. | The product activates temperature protection below -10°C/-4°F and resumes output at 0°C/32°F-37°F. |
| सुरू करा | Buzzer sounding, silence after 30 seconds. | Overcurrent detected, stop starting vehicle, disappear for 30S. |
| सुरू करा | Vehicle start detected more than 5 times within 10 minutes, buzzer sounds buzzer mutes after 30S "START" continues to flash. | Stop starting the vehicle and the safety mode disappears after 10 minutes. |
6. तपशील
Detailed technical specifications for the Enthuze ENT-TD6000:
| पॅरामीटर | मूल्य |
|---|---|
| उत्पादनाचे नाव | एअर कंप्रेसरसह जंप स्टार्टर |
| मॉडेल | ENT-TD6000 |
| आकार | 193 x 110 x 53 मिमी |
| महागाई दाब श्रेणी | 0.2-8बार / 3-120psi |
| ऑपरेटिंग तापमान | Charge: 0°C~45°C, Discharge: -10°C~45°C |
| स्टोरेज तापमान | -10°C~50°C |
| Inflatable Hose Length | 435mm (including air nozzle) |
| बॅटरी क्षमता | 41.44 डब्ल्यूएच (14.8 व्ही, 2.8 एएच) |
| कामकाजाचा आवाज | 80 मीटरपासून 1dB पेक्षा कमी अंतरावर |
| चार्जिंग इनपुट | 5V=3A |
| चार्जिंग वेळ | सुमारे 3.5 तास |
| यूएसबी आउटपुट 1 | 5V=3A, 9V=2A, 12V=1.5A |
| यूएसबी आउटपुट 2 | 5V=2.1A |
| Air Pressure Sensor Accuracy | Ps 1psi |
| स्टार्ट कार व्हॉलtage | 12V |
| Start Car Current | 500A (1000A Peak) |
Figure 3: Basic Parameters of the Enthuze ENT-TD6000.
7. महत्त्वपूर्ण सुरक्षा चेतावणी
- Do not overcharge the internal battery. Refer to the instruction manual for proper charging procedures.
- Do not smoke, strike a match, or cause a spark in the vicinity of the power pack during operation.
- फक्त हवेशीर भागात अंतर्गत बॅटरी चार्ज करा.
- Turn off the 12V firing output when the remaining power of the device's battery cell is less than 20%. USB port can output normally.
- व्यक्तींना इजा होण्याचा धोका. पॉवर कॉर्ड किंवा बॅटरी केबल्स कोणत्याही प्रकारे खराब झाल्यास हे उत्पादन वापरू नका.
- हे उपकरण व्यावसायिक दुरुस्ती सुविधेत वापरण्यासाठी नाही.
- हे उपकरण वापरात नसताना घरामध्ये संग्रहित करण्याचा हेतू आहे. हे उपकरण वापरात नसताना संचयित किंवा बाहेर सोडले जाऊ नये.
- हे उपकरण घराबाहेर तात्पुरते वापरण्यासाठी आहे आणि हे उपकरण ओल्या परिस्थितीत वापरताना वाजवी काळजी घेतली पाहिजे.
8. हमी आणि समर्थन
For warranty information or technical support, please contact Enthuze Automotive Products directly. Keep your purchase receipt as proof of purchase.
