परिचय
The TOA SR-S4S is a high-performance, two-way line array speaker system designed for short-distance sound transmission. Its unique design allows for precise sound projection and consistent audio levels across various distances. This manual provides essential information for the proper setup, operation, and maintenance of your SR-S4S speaker system.
सुरक्षितता माहिती
Always observe the following safety precautions to prevent personal injury and damage to the equipment:
- उर्जा स्त्रोत: Ensure the speaker is connected to a power source that matches its voltagई आवश्यकता.
- वायुवीजन: वायुवीजन उघड्या जागा अडवू नका. जास्त गरम होण्यापासून रोखण्यासाठी युनिटभोवती पुरेसा वायुप्रवाह सुनिश्चित करा.
- ओलावा: Keep the speaker away from water or excessive moisture. This product is not waterproof.
- माउंटिंग: When mounting, ensure the structure can support the speaker's weight (approximately 16 kg / 42.8 pounds). Use appropriate mounting hardware and follow all local building codes.
- सर्व्हिसिंग: या उत्पादनाची स्वतः सेवा करण्याचा प्रयत्न करू नका. पात्र सेवा कर्मचाऱ्यांना सर्व सेवांचा संदर्भ द्या.
उत्पादन संपलेview
The SR-S4S speaker system is engineered for optimal sound distribution, featuring a robust design and advanced acoustic components.
प्रतिमा: समोर view of the TOA SR-S4S Short Throw 2-Way Line Array Speaker System. The speaker is a tall, slender, rectangular unit with a perforated metal grille covering the front face. The enclosure is light gray, and visible bolts secure the side panels. The TOA logo is subtly visible near the bottom of the grille.
प्रमुख वैशिष्ट्ये:
- Equipped with eight 10cm woofers for powerful low-frequency output.
- Features 24 small tweeters for clear high-frequency sound reproduction.
- Linear sound source effect minimizes energy attenuation over distance, enhancing long-distance sound projection.
- Suppressed vertical sound dispersion directs sound precisely to the target area.
- Maintains consistent sound pressure levels, preventing excessive loudness near the speaker.
- Allows for configuration of longer sound sources by joining 2 or 3 speakers, increasing projection distance and volume.
- Includes a built-in network circuit for single amplifier drive.
- Can be converted to a bi-amplifier drive system by modifying internal connections.
- Supports high-impedance applications with the optional MT-S0601 Matching Transformer.
सेटअप
Follow these steps for the initial setup of your SR-S4S speaker system:
- अनपॅक करणे: Carefully remove the speaker from its packaging. Inspect for any signs of damage during transit.
- प्लेसमेंट: Position the speaker in the desired location. Ensure it is on a stable, level surface or securely mounted according to professional installation guidelines. Consider the speaker's directivity angle (90° Horizontal / 10° Vertical) for optimal sound coverage.
- कनेक्शन: स्पीकर तुमच्याशी कनेक्ट करा amplifier using appropriate speaker cables. The SR-S4S features M5 screw terminals and Neutrik NL4MP x2 input connectors. Ensure correct polarity (+ to + and - to -).
- पर्यायी द्वि-Amping: If using a bi-amplifier drive system, refer to the detailed wiring diagram in the advanced setup guide (not included in this manual) for internal connection changes.
- Optional Matching Transformer: For high-impedance applications, install the optional MT-S0601 Matching Transformer as per its instructions.
- पॉवर चालू: Once all connections are secure, power on your amplifier and audio source. Start with the volume at its lowest setting.
कार्यरत आहे
Operating the SR-S4S is straightforward once properly set up:
- आवाज नियंत्रण: तुमचा वापरून आवाज पातळी समायोजित करा amplifier's controls. Avoid setting the volume too high, which can cause distortion or damage to the speaker.
- ध्वनी ऑप्टिमायझेशन: For optimal sound quality, consider using a digital processor like the DP-0206 (optional) to fine-tune the frequency response.
- सिस्टम इंटिग्रेशन: The SR-S4S is designed to integrate seamlessly into various audio setups, from small venues to larger installations requiring precise sound projection.
देखभाल
Regular maintenance ensures the longevity and performance of your SR-S4S speaker system:
- स्वच्छता: Use a soft, dry cloth to wipe down the exterior of the speaker. Do not use abrasive cleaners, solvents, or excessive moisture.
- तपासणी: Periodically check all cable connections for tightness and signs of wear. Ensure mounting hardware remains secure.
- स्टोरेज: If storing the speaker for an extended period, keep it in a dry, temperature-controlled environment, ideally in its original packaging or a protective cover.
समस्यानिवारण
If you encounter issues with your SR-S4S speaker, refer to the following common problems and solutions:
| समस्या | संभाव्य कारण | उपाय |
|---|---|---|
| आवाज आउटपुट नाही | सैल किंवा चुकीचे केबल कनेक्शन Ampलाइफायर चालू नाही चुकीची इनपुट निवड चालू आहे ampअधिक जिवंत | सर्व स्पीकर तपासा आणि ampलाइफायर कनेक्शन. खात्री करा ampलाइफायर चालू आहे आणि कार्यरत आहे. Verify correct input source is selected on ampलाइफायर |
| विकृत आवाज | खूप उच्च खंड Damaged speaker cable Ampलिफायर क्लिपिंग | आवाज पातळी कमी करा. Inspect speaker cables for damage; replace if necessary. तपासा amplifier's output level and ensure it's not overdriven. |
| मधूनमधून आवाज | सैल कनेक्शन दोषपूर्ण केबल | सर्व कनेक्शन सुरक्षित करा. Try a different speaker cable to isolate the issue. |
If the problem persists after attempting these solutions, contact TOA customer support or a qualified service technician.
तपशील
| वैशिष्ट्य | तपशील |
|---|---|
| संलग्नक प्रकार | बास-रिफ्लेक्स प्रकार |
| पॉवर हँडलिंग क्षमता | Continuous program 600W |
| रेट केलेले प्रतिबाधा | 8Ω |
| संवेदनशीलता (1W, 1m) | 93dB |
| वारंवारता प्रतिसाद | 70-20000Hz (when using DP-0206 (option)) |
| क्रॉसओवर वारंवारता | 3500Hz |
| डायरेक्टिव्हिटी कोन | क्षैतिज: 90°, अनुलंब: 10° |
| Low Frequency Component | 10cm cone-type x8 |
| High Frequency Component | 2.5cm balanced dome-type x24 |
| इनपुट कनेक्टर | M5 screw terminal, distance between barriers: 12.2mm and Neutrik NL4MP x2 |
| परिमाण (W x H x D) | 160 x 892 x 303 मिमी (6.3 x 35.1 x 11.9 इंच) |
| वजन | 16 kg (35.3 lbs) / Item Weight: 42.8 pounds (from product data) |
| मॉडेल क्रमांक | SR-S4S |
हमी आणि समर्थन
For warranty information, please refer to the warranty card included with your product or visit the official TOA website. For technical support, replacement parts, or service inquiries, please contact TOA customer service through their official channels. Provide your product model number (SR-S4S) and serial number when contacting support.
TOA इलेक्ट्रॉनिक्स
Manufacturer of the SR-S4S Line Array Speaker System.
