परिचय
This manual provides comprehensive instructions for the installation, operation, and maintenance of your K-Rain K2 Pro 3/4" Gear Drive Rotor. Designed for efficient and effective watering of lawns and landscapes, the K2 Pro rotor delivers outstanding coverage with high performance and low maintenance. It features a 5-inch pop-up height, adjustable arc from 40° to 360°, and a spray distance of 18 to 40 feet.
Figure 1: K-Rain K2 Pro 5-inch Pop-Up Rotor (4-Pack) with accessories.
प्रमुख वैशिष्ट्ये
- टिकाऊ बांधकाम: Designed and built for year-after-year high performance and low maintenance.
- कार्यक्षम कव्हरेज: Delivers outstanding coverage on various terrains, optimizing water usage.
- Water Conservation: Focuses on water efficiency, helping conserve water while ensuring proper coverage.
- समायोज्य श्रेणी: Spray distance adjustable from 18 to 40 feet (5.5 to 12.2 meters).
- समायोज्य चाप: Arc spray pattern adjustable from 40° to 360° (full-circle).
- Standard Inlet: Features a 3/4-inch threaded inlet for easy connection.
- Pop-Up Height: 5-inch pop-up height for effective clearance.
- Pre-installed Nozzle: Comes with a pre-installed 2.5 GPM nozzle.
- पाणी सुसंगतता: Compatible with all types of water.
- सुसंगतता: Replaces major brands and works seamlessly with other irrigation systems.
सेटअप आणि स्थापना
The K-Rain K2 Pro rotor is designed for straightforward installation. Ensure your irrigation system is turned off and depressurized before beginning installation.
स्थापना चरण:
- कनेक्शन तयार करा: Ensure the 3/4-inch threaded inlet is clean and free of debris. The rotor is designed to be installed directly into a 3/4-inch pipe fitting.
- Thread the Rotor: Carefully thread the K2 Pro rotor into the pipe fitting. Hand-tighten first, then use a wrench for a snug fit. Avoid over-tightening.
- No Pipe Dope: As indicated on the bottom of the unit, "USE NO PIPE DOPE". This means do not use pipe thread sealant paste or tape on the threads, as it can interfere with the internal mechanisms.
- पोझिशनिंग: Ensure the top of the sprinkler head is flush with the ground level once installed.
आकृती 2: तळ view of the K2 Pro rotor, highlighting the 3/4" threaded inlet and the "USE NO PIPE DOPE" instruction.
ऑपरेटिंग सूचना
The K2 Pro rotor features intuitive top-side adjustments for spray distance and arc pattern. These adjustments can be made without disassembling the sprinkler.
Adjusting Arc and Distance:
- Identify Left Start Position: The left stop is fixed. To find it, turn the nozzle turret counter-clockwise until it stops. This is the left start position.
- Set Right Stop (Arc Adjustment):
- Insert the K-Rain adjustment key (or a flathead screwdriver) into the arc adjustment slot on the top of the rotor (marked with a 360° arrow).
- Turn the key clockwise to increase the arc (up to 360°) or counter-clockwise to decrease the arc (down to 40°). The numbers on the top cap indicate the arc setting.
- Adjust Spray Distance (Radius):
- Insert the adjustment key into the distance adjustment slot (marked with '+' and '-' symbols).
- Turn the key clockwise to decrease the spray distance or counter-clockwise to increase it.
- प्रवाह नियंत्रण: The K2 Pro allows for flow control adjustment. This can be used to turn off individual heads during installation or for quick nozzle changes. Refer to the diagram on the side of the rotor for specific flow control instructions.
आकृती 3: शीर्ष view of the K2 Pro rotor, showing arc and distance adjustment points.
देखभाल
The K-Rain K2 Pro rotor is designed for low maintenance. Regular inspection can help ensure optimal performance and longevity.
- नियमित स्वच्छता: Periodically check the sprinkler head for debris (e.g., grass clippings, dirt) that may obstruct the nozzle or pop-up mechanism. Clean as needed.
- नोजल तपासणी: Ensure the nozzle is clear and not damaged. Replacement nozzles are included in the install kit.
- हिवाळीकरण: In regions with freezing temperatures, ensure proper winterization procedures are followed to prevent damage to the sprinkler and irrigation system. Consult a local irrigation professional if unsure.
समस्यानिवारण
If you encounter issues with your K-Rain K2 Pro rotor, refer to the following common troubleshooting tips:
| समस्या | संभाव्य कारण | उपाय |
|---|---|---|
| Rotor not rotating or spraying unevenly. | Clogged nozzle, low water pressure, debris in the rotor mechanism. | Clean the nozzle. Check system water pressure. Flush the line or inspect the rotor for internal debris. |
| Rotor not popping up fully. | Low water pressure, debris around the pop-up stem, damaged spring. | Check system water pressure. Clear debris from around the stem. If spring is damaged, replacement may be necessary. |
| Water leaking from around the cap. | Damaged seal or O-ring, loose cap. | Ensure the cap is securely tightened. Inspect and replace seals/O-rings if damaged. |
| Incorrect spray arc. | Arc not properly set. | Refer to "Operating Instructions" to re-adjust the arc setting using the adjustment key. |
तपशील
Detailed specifications for the K-Rain K2 Pro 3/4" Gear Drive Rotor:
| विशेषता | तपशील |
|---|---|
| ब्रँड | के-पाऊस |
| मॉडेल क्रमांक | AMZ-K2PRO-4PACK |
| भाग क्रमांक | AMZ-K2PRO-4PACK |
| UPC | 671923123529 |
| साहित्य | स्टेनलेस स्टील |
| बाह्य समाप्त | स्टेनलेस स्टील |
| आयटमचे परिमाण (L x W x H) | 8.39 x 7.13 x 3.35 इंच |
| आयटम वजन | 3.16 पाउंड |
| इनलेट कनेक्शन आकार | ०.२५ इंच (१/४") |
| इनलेट कनेक्शन प्रकार | थ्रेडेड |
| Pop-Up Height | 5 इंच |
| Spray Distance Range | 18 - 40 feet |
| Arc Spray Pattern | ०° - ४५° |
| Pre-installed Nozzle | एक्सएनयूएमएक्स जीपीएम |
| उर्जा स्त्रोत | हायड्रॉलिक पॉवर्ड |
| रंग | Red, Gray, Black |
| मूळ देश | यूएसए |
| विशिष्टता भेटली | वॉटर सेन्स |
Figure 4: K-Rain Sprinkler Comparison Chart (for reference).
हमी आणि समर्थन
The K-Rain K2 Pro 3/4" Gear Drive Rotor comes with a 5 वर्षाची वॉरंटी, दीर्घकालीन विश्वासार्हता आणि कामगिरी सुनिश्चित करणे.
For further assistance, technical support, or to explore other K-Rain products, please visit the official K-Rain store or webसाइट:
