परिचय
This manual provides detailed instructions for the installation, operation, and maintenance of your Herdio 6.5-inch Bluetooth Ceiling Speakers with In-Wall Amplifier. This system is designed to deliver high-fidelity audio for various indoor environments, including home theaters, bathrooms, living rooms, kitchens, and offices. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.
पॅकेज सामग्री
खाली सूचीबद्ध केलेल्या सर्व वस्तू तुमच्या पॅकेजमध्ये समाविष्ट आहेत याची खात्री करा:
- 1x Wall Mount Bluetooth Ampअधिक जिवंत
- एक्सएमएक्सएक्स एसी अॅडॉप्टर
- 2x स्क्रू
- 2x 6.5-inch In-Ceiling Speakers
- 2x Speaker Wires
- 2x User Manuals (one for amplifier, one for speakers)
सेटअप
This section guides you through the physical installation and wiring of your Herdio ceiling speaker system.
1. Ampअधिक प्रतिष्ठापन
इन-वॉल amplifier is designed for flush mounting in a standard wall plate size. Ensure you have appropriate wiring access before proceeding.
- भिंत तयार करा: Use the provided template (if applicable) to mark and cut an opening in the wall for the ampलाइफायर
- पॉवर केबल कनेक्ट करा: Connect the 12V DC power cable to the designated two-pin connector on the back of the ampजीवनदायी मॉड्यूल.
- ऑडिओ केबल कनेक्ट करा: Connect the audio cable to the three-pin connector on the back of the ampजीवनदायी मॉड्यूल.
- सुरक्षित Ampजीवनदायी: घाला amplifier module into the wall opening and secure it using the provided screws.
- फेसप्लेट जोडा: Place the decorative faceplate over the installed amplifier and secure it.
५.१. स्पीकरची स्थापना
The ceiling speakers are designed for flush mounting. Ensure you have appropriate ceiling space and wiring access.
- मार्क कटआउट: Use the provided cutout template to mark the desired location for each speaker in the ceiling.
- कट ओपनिंग: Carefully cut the circular opening in the ceiling according to the marked template. The cutout diameter is approximately 8.07 inches (20.5 cm).
- लोखंडी जाळी काढा: Gently remove the magnetic grille from the front of each speaker.
- स्पीकर वायर्स कनेक्ट करा: Connect the speaker wires to the spring-loaded terminals on the back of each speaker. Ensure correct polarity: red wire to positive (+) terminal, black wire to negative (-) terminal.
- स्पीकर घाला: Insert the speaker into the ceiling opening. The mounting clamps will automatically engage.
- Cl घट्ट कराamps: Use a screwdriver to tighten the screws on the front baffle of the speaker. This will rotate the mounting clamps and secure the speaker firmly in place.
- Replace Grille: Reattach the magnetic grille to the speaker.
3. वायरिंग आकृती
Connect the speaker wires from the ceiling speakers to the amplifier terminals. Ensure correct polarity for both speakers (red to +, black to -).
4. वीज जोडणी
Connect the AC adapter to a standard 120V power outlet and then plug the DC end into the amplifier's power input. The power LED on the amplifier will illuminate.
Video: This video demonstrates the unboxing, wiring, Bluetooth pairing, and installation process for the Herdio 6.5-inch Bluetooth Ceiling Speakers Set.
ऑपरेटिंग सूचना
Learn how to use your Herdio ceiling speaker system.
७.१. पॉवर चालू/बंद आणि आवाज नियंत्रण
Turn the knob on the amplifier clockwise to power on the unit and increase the volume. Turn it counter-clockwise to decrease volume and power off. You will hear an audible drop sound when powering on.
2. ब्लूटूथ पेअरिंग
After powering on, the blue Bluetooth indicator light will flash, indicating it is in pairing mode. On your smart device (phone, tablet, etc.), search for available Bluetooth devices and select 'Herdio'. Once connected, the blue light will remain solid.
3. इनपुट निवड
Use the input selection switch on the amplifier to choose between Bluetooth (BT), Auxiliary (AUX), or Microphone (MIC) input modes.
4. USB Functionality
The USB port functions as a flash memory reader for media playback and also provides a charging port for your devices (5V/1A).
5. मायक्रोफोन इनपुट
Connect a microphone to the 1/4-inch MIC IN jack for paging or voice applications.
देखभाल
To ensure the longevity and optimal performance of your Herdio ceiling speakers and ampलिफायर, या देखभाल मार्गदर्शक तत्त्वांचे पालन करा:
- स्वच्छता: स्वच्छ करण्यासाठी मऊ, कोरडे कापड वापरा amplifier faceplate and speaker grilles. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the finish.
- धूळ काढणे: Periodically use a soft brush or a low-power vacuum with a brush attachment to gently remove dust from the speaker grilles.
- पर्यावरणीय परिस्थिती: Ensure the speakers and amplifier are installed in environments free from excessive moisture, extreme temperatures, and direct sunlight. The product is not waterproof.
- वायरिंग तपासणी: सर्व वायरिंग कनेक्शन सुरक्षित आहेत आणि गंज किंवा नुकसानापासून मुक्त आहेत याची खात्री करण्यासाठी वेळोवेळी तपासा.
समस्यानिवारण
If you encounter issues with your Herdio ceiling speaker system, refer to the following common problems and solutions:
- शक्ती नाही:
- Ensure the AC adapter is securely plugged into a working power outlet and the amplifier's DC input.
- Check if the power knob on the amplifier is turned clockwise to the 'ON' position.
- दुसरे उपकरण प्लग इन करून पॉवर आउटलेट कार्यरत आहे का ते तपासा.
- स्पीकर्समधून आवाज येत नाही:
- Confirm that the speaker wires are correctly connected to both the speakers and the amplifier, observing proper polarity (+ to +, - to -).
- Ensure the volume knob on the ampलाइफायर चालू आहे.
- Check the input selection switch on the amplifier to ensure the correct source (BT, AUX, MIC) is selected.
- If using Bluetooth, ensure your device is paired and playing audio.
- If using AUX or MIC, ensure the external device is connected and functioning correctly.
- ब्लूटूथ कनेक्शन समस्या:
- याची खात्री करा amplifier is in Bluetooth pairing mode (blue light flashing).
- Make sure your Bluetooth device is within the 30+ feet wireless range.
- Forget the 'Herdio' device from your smart device's Bluetooth settings and attempt to re-pair.
- Restart both the amplifier and your Bluetooth device.
- विकृत आवाज:
- Reduce the volume on both the amplifier and your audio source device.
- स्पीकर वायर कनेक्शनमध्ये कोणतेही सैल स्ट्रँड किंवा शॉर्ट सर्किट आहेत का ते तपासा.
- Ensure the audio source is not overdriven or producing distorted signals.
तपशील
| ब्रँड | हेरडिओ |
| मॉडेलचे नाव | HCS 818 |
| स्पीकरचा प्रकार | वूफर, ट्वीटर |
| स्पीकरचा आकार | 6.5 इंच |
| स्पीकर कमाल आउटपुट पॉवर | 320 वॅट्स |
| प्रतिबाधा | 8 ओम |
| वारंवारता प्रतिसाद | 20 KHz (Note: This is likely the upper limit, typical range is broader) |
| कनेक्टिव्हिटी तंत्रज्ञान | सहाय्यक, ब्लूटूथ, यूएसबी |
| वायरलेस कम्युनिकेशन तंत्रज्ञान | ब्लूटूथ |
| ब्लूटूथ श्रेणी | 30 फूट |
| इनपुट व्हॉल्यूमtage | 120 व्होल्ट |
| उर्जा स्त्रोत | कॉर्ड केलेले इलेक्ट्रिक |
| माउंटिंग प्रकार | Flush Mount, Ceiling Mount |
| उत्पादनाचे परिमाण (Ampजीवनदायी) | 9.25"D x 9.25"W x 4.13"H (Note: This dimension seems to be for the speaker, not the ampलाइफायर Amplifier is typically smaller, as shown in images.) |
| साहित्य | ऍक्रिलोनिट्रिल बुटाडीन स्टायरीन (एबीएस) |
| जलरोधक आहे | खोटे (पाणी प्रतिरोधक नाही) |
| आयटम वजन | २६.३ पौंड (एकूण पॅकेज वजन) |
हमी माहिती
The Herdio 6.5-inch Bluetooth Ceiling Speakers with In-Wall Amplifier a सह येतो मर्यादित वॉरंटी. For specific details regarding warranty coverage, duration, and claims process, please refer to the warranty card included in your package or contact Herdio customer support directly.
सपोर्ट
For further assistance, technical support, or inquiries regarding your Herdio product, please visit the official Herdio website or contact their customer service department. Contact information can typically be found on the product packaging or on the Herdio webसाइट
