LaView LV-D01-R इलेक्ट्रॉनिक डेडबोल्ट लॉक वापरकर्ता मॅन्युअल

1. परिचय

This manual provides detailed instructions for the installation, programming, operation, and maintenance of your LaView LV-D01-R Electronic Deadbolt Lock. Please read this guide thoroughly before installation and use to ensure proper function and security.

Figure 1: LaView LV-D01-R Electronic Deadbolt Lock (Exterior and Interior Units)

२.७. प्री-इंस्टॉलेशन चेकलिस्ट

Before beginning installation, ensure your door meets the following specifications:

• दरवाजा भोक व्यास: 2-1/8 inches (54 mm).
• बॅकसेट: Adjustable to either 2-3/8 inches (60 mm) or 2-3/4 inches (70 mm).
• दरवाजाच्या काठाच्या छिद्राचा व्यास: 1 inch (25 mm).
• दरवाजाची जाडी: 1-3/8 inches to 2 inches (35 mm to 50 mm).

If drilling is required, refer to the provided cutout template in your product packaging.

Figure 2: Door Measurement and Component Diagram

3. स्थापना पुस्तिका

यशस्वी स्थापनेसाठी या चरणांचे अनुसरण करा:

1. Adjust Latch (if necessary): The latch can be adjusted for 2-3/8" (60mm) or 2-3/4" (70mm) backsets. Rotate and pull the backset as instructed to extend the latch if needed.
2. लॅच स्थापित करा: Insert the latch into the door edge hole. Ensure the latch plate is flush with the door edge and secure with screws.
3. बाह्य असेंब्ली स्थापित करा: Place the exterior keypad assembly onto the door, aligning the spindle through the latch.
4. माउंटिंग प्लेट स्थापित करा: Secure the interior mounting plate to the exterior assembly using the provided screws.
5. केबल्स कनेक्ट करा: Carefully connect the cable from the exterior assembly to the interior assembly.
6. इंटिरियर असेंब्ली स्थापित करा: Attach the interior assembly to the mounting plate, ensuring the thumb turn spindle engages correctly. Secure with screws.
7. बॅटरी स्थापित करा: बॅटरी कंपार्टमेंटमध्ये 4 AA बॅटरी घाला.
8. चाचणी ऑपरेशन: Test the lock with the default master code and the physical key to ensure smooth operation.

4. Programming and Operation

The default master PIN code is 12345678. For security, you will be prompted to change this code before adding any other user codes.

4.1 मास्टर कोड बदला

To change the master code:

1. दाबा **.
2. Enter the current master code (default: 12345678).
3. दाबा #.
4. दाबा 1.
5. दाबा #.
6. Enter your new master code (4-10 digits).
7. दाबा #.
8. Re-enter your new master code to verify.
9. दाबा # to store the new master code.

A green indicator light confirms successful setting; a red light indicates failure.

4.2 Add User Codes

You can program up to 20 unique user codes (4-10 digits) for family and friends.

1. दाबा **.
2. मुख्य कोड प्रविष्ट करा.
3. दाबा #.
4. दाबा 2.
5. दाबा #.
6. Enter a new user code (4-10 digits).
7. दाबा #.
8. Re-enter the new user code to verify.
9. दाबा # to store the user code.

4.3 Add One-Time Codes

One-time codes are useful for temporary access and expire after a single use.

1. दाबा **.
2. मुख्य कोड प्रविष्ट करा.
3. दाबा #.
4. दाबा 7.
5. दाबा #.
6. Enter a new one-time code (4-10 digits).
7. दाबा #.
8. Re-enter the new one-time code to verify.
9. दाबा # to add the one-time code.

The one-time code will expire after unlocking the lock once.

4.4 Enable/Disable Auto-Lock

The Auto-Lock function automatically locks the door after 30 seconds of inactivity. It is disabled by default.

• To Enable Auto-Lock: दाबा ** + मास्टर कोड + # + 51 + #.
• To Disable Auto-Lock: दाबा ** + मास्टर कोड + # + 52 + #.

Figure 3: Auto-Lock Feature

4.5 Enable Vacation Mode

Vacation mode provides enhanced security when you are away. If the lock is unlocked by key or thumb turn in this mode, it will beep for 1 minute.

1. दाबा **.
2. मुख्य कोड प्रविष्ट करा.
3. दाबा #.
4. दाबा 6.
5. दाबा # to enable Vacation Mode.

To disable Vacation Mode, repeat the same steps.

4.6 Key Override

The lock includes a physical key override for manual access, especially useful if batteries are depleted.

Figure 4: Key Override for Manual Access

5. देखभाल

5.1 बॅटरी बदलणे

The lock is powered by 4 AA batteries. A low battery indicator will alert you when replacement is needed.

आकृती १२: कमी बॅटरी अलर्ट

To replace batteries, remove the interior cover, replace the old batteries with new ones, and reattach the cover.

5.2 स्वच्छता

कुलूपाचा बाह्य भाग मऊ, डamp कापड. फिनिश किंवा इलेक्ट्रॉनिक घटकांना नुकसान पोहोचवू शकणारे अपघर्षक क्लीनर किंवा सॉल्व्हेंट्स टाळा.

6. तपशील

7. समस्या निवारण

• लॉक प्रतिसाद देत नाही: Check battery levels. Replace batteries if the low battery indicator is active.
• चुकीची कोड एंट्री: Ensure you are pressing the correct sequence and the '#' key after each code entry.
• Setting Failure: If the indicator light flashes red after attempting a setting change, the operation was unsuccessful. Re-attempt the steps carefully.
• Physical Key Not Working: Ensure the key is fully inserted and turned correctly. Check for any obstructions in the keyway.
• ऑटो-लॉक खराबी: Verify that the Auto-Lock function is enabled (refer to section 4.4).

8. हमी आणि समर्थन

LaView offers lifetime technical support from the date of purchase. For any concerns or assistance, please contact their customer service team:

• Online Phone Calls: Monday to Friday, 9 am to 5 pm PDT.
• 24/7 Online After-Sales Email Service.

Refer to your product packaging or the official LaView webविशिष्ट संपर्क तपशीलांसाठी साइट.