शार्कून आरजीबी स्लायडर डब्ल्यूटी मिड-टॉवर पीसी केस वापरकर्ता मॅन्युअल

1. परिचय

The Sharkoon RGB SLIDER WT is a versatile mid-tower PC case designed for optimal functionality and aesthetic appeal. It features an integrated RGB LED strip on the front panel, offering customizable lighting effects. The case supports various component configurations, including multiple cooling fan options and extensive storage capabilities. A tempered glass side panel provides a clear view अंतर्गत घटकांचे.

प्रतिमा १: समोरची बाजू view of the Sharkoon RGB SLIDER WT PC Case, showcasing the RGB LED strip and tempered glass side panel.

2. पॅकेज सामग्री

कृपया सर्व वस्तू पॅकेजमध्ये आहेत का ते तपासा:

• Sharkoon RGB SLIDER WT PC Case
• 1x 120mm Rear Fan (pre-installed)
• Accessory Box (containing screws, cable ties, and this manual)

3. तपशील

Image 3.1: Diagram illustrating the dimensions of the Sharkoon RGB SLIDER WT PC Case.

4. सेटअप आणि स्थापना

4.1. तयारी

Before beginning installation, ensure the PC case is placed on a stable, flat surface. Unpack all components and verify against the package contents list. It is recommended to wear an anti-static wrist strap to prevent damage to sensitive electronic components.

4.2. मदरबोर्ड स्थापना

1. Install the I/O shield into the designated slot at the rear of the case.
2. Align the motherboard with the standoffs inside the case. Ensure the I/O ports align with the I/O shield.
3. दिलेल्या स्क्रू वापरून मदरबोर्ड सुरक्षित करा.

प्रतिमा ४.२: आतील भाग view of the PC case, showing the motherboard mounting area and pre-installed rear fan.

६. पॉवर सप्लाय युनिट (PSU) ची स्थापना

1. Locate the PSU tunnel at the bottom rear of the case.
2. Slide the PSU into the tunnel from the rear of the case, ensuring the fan faces downwards (if applicable, for bottom intake).
3. केसच्या मागील बाजूस असलेल्या स्क्रूने PSU सुरक्षित करा.

४.३. स्टोरेज डिव्हाइस इंस्टॉलेशन

The case supports 3.5" HDDs and 2.5" SSDs.

• ३.५" हार्ड ड्राइव्ह: Install into the drive cage located within the PSU tunnel.
• २.५" एसएसडी: Mount onto the dedicated SSD trays behind the motherboard tray or on top of the PSU tunnel.

Image 4.2: Rear interior view, highlighting cable management options and locations for 2.5" SSDs and 3.5" HDD cage.

4.5. Expansion Card Installation (e.g., GPU)

1. केसच्या मागील बाजूस आवश्यक असलेले PCIe स्लॉट कव्हर्स काढा.
2. Insert the expansion card into the corresponding PCIe slot on the motherboard.
3. Secure the card with screws.

4.6. Fan Installation (Optional)

Additional fans can be installed at the front and top of the case.

• समोरचे चाहते: Remove the front panel to access the mounting points for up to three 120mm fans.
• शीर्ष चाहते: Mount up to two 120mm or 140mm fans to the top panel.

4.7. केबल व्यवस्थापन

Utilize the cutouts and tie-down points behind the motherboard tray to route and secure cables. This improves airflow and maintains a clean interior aesthetic.

5. ऑपरेटिंग सूचना

5.1. पॉवरिंग चालू

After all components are installed and cables connected, close the side panels. Connect the power cable to the PSU and a wall outlet. Press the power button on the top panel of the case to start your system.

प्रतिमा ३: वरती view of the case, detailing the front I/O panel with USB ports and audio jacks.

७.४. आरजीबी लाइटिंग कंट्रोल

The front RGB LED strip can be controlled in two ways:

• अंगभूत नियंत्रक: Use the dedicated RGB control button on the top panel to cycle through 14 preset lighting modes.
• मदरबोर्ड ARGB सिंक: Connect the RGB cable from the case to a compatible 3-pin 5V ARGB header on your motherboard. The lighting can then be controlled via motherboard software (e.g., Asus Aura Sync, MSI Mystic Light Sync, Gigabyte Fusion, ASRock Polychrome SYNC).

5.3. Front Panel Ports

The front I/O panel provides convenient access to:

• 2x USB 3.0 ports for high-speed data transfer.
• 1x USB 2.0 port for general peripherals.
• Audio In (microphone) and Audio Out (headphone) jacks.

6. देखभाल

७.२. साफसफाई

• बाह्य: मऊ सह बाह्य पृष्ठभाग पुसणे, डीamp कापड अपघर्षक क्लीनर टाळा.
• धूळ फिल्टर: Regularly remove and clean the dust filters (e.g., top magnetic filter, bottom PSU filter) to maintain optimal airflow and prevent dust buildup inside the case.
• अंतर्गत: Use compressed air to remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning the interior.

6.2. वायुप्रवाह

Ensure that the case has adequate clearance around it for proper airflow. Avoid blocking intake or exhaust vents. Regularly check fan operation to ensure they are spinning correctly.

7. समस्या निवारण

7.1. System Does Not Power On

• पॉवर केबल PSU आणि वॉल आउटलेट दोन्हीशी सुरक्षितपणे जोडलेली आहे याची पडताळणी करा.
• Ensure the PSU's power switch is in the 'ON' position.
• फ्रंट पॅनल पॉवर बटण केबल मदरबोर्डच्या फ्रंट पॅनल हेडरशी योग्यरित्या जोडलेली आहे का ते तपासा.
• Confirm all internal power connections (24-pin ATX, CPU power, GPU power) are secure.

7.2. Fans Not Spinning

• मदरबोर्ड किंवा फॅन कंट्रोलरशी फॅन पॉवर कनेक्शन तपासा.
• Ensure fan headers are enabled in the motherboard BIOS/UEFI settings.

९.४. आरजीबी लाइटिंग काम करत नाही

• If using the built-in controller, press the RGB button to cycle modes.
• If using motherboard sync, ensure the ARGB cable is correctly connected to a 3-pin 5V ARGB header (not 4-pin 12V RGB).
• Verify that the motherboard's RGB software is installed and configured correctly.

7.4. Front Panel USB/Audio Ports Not Functioning

• Check that the USB 3.0, USB 2.0, and HD Audio cables from the front panel are securely connected to the corresponding headers on the motherboard.
• Ensure motherboard drivers are installed.

8. हमी आणि समर्थन

Sharkoon products are manufactured to high-quality standards. For detailed warranty information, please refer to the warranty card included with your product or visit the official Sharkoon website. For technical support, product inquiries, or service requests, please contact Sharkoon customer support through their official channels.

For further assistance, please visit the official Sharkoon webसाइट: www.sharkoon.com