Sonew 7 Channel GSM Remote Switch Controller 4G SMS Relay Switch User Manual

1. परिचय

The Sonew 7 Channel GSM Remote Switch Controller (Model: Sonewa4re30d9sh-12) is a 4G remote control switch designed to operate via the 4G mobile phone network. This device features seven independent relay switches, allowing remote activation of connected equipment. It supports control through dialing its cell phone number or by sending SMS text commands.

The controller identifies authorized phone numbers, rejecting calls from unauthorized numbers without incurring call charges. Its 4G, 3G, and GSM compatibility ensures functionality across various regions. Programming can be performed quickly via SMS or the on-board quick teaching button. All relay outputs can function in either switch mode or pulse timing mode, supporting both free control and security authorization number control modes. The device also allows disabling SMS replies to save costs and provides a history log for equipment operation. It offers two output modes: relay output with call mode and relay output with SMS control.

Image 1.1: The Sonew 7 Channel GSM Remote Switch Controller with its protective cover removed, showing the internal circuit board, SIM card slot, antenna, and seven blue relay switches.

2. सेटअप

2.1 पॅकेज सामग्री

पॅकेजमध्ये सर्व वस्तू असल्याची खात्री करा:

• 1 x 4G/3G/GSM 7-Way Remote Switch Controller
• 1 x USB केबल
• 1 x USB Programming Adapter
• 1 एक्स अँटेना
• १ x वापरकर्ता मॅन्युअल (हे दस्तऐवज)

Image 2.1: The Sonew controller alongside its accessories, including the USB cable, programming adapter, and antenna.

2.2 सिम कार्ड इंस्टॉलेशन

1. Open the controller's casinकाळजीपूर्वक.
2. Locate the SIM card slot on the circuit board.
3. Insert a standard 4G/3G/GSM SIM card into the slot, ensuring correct orientation.
4. सी बंद कराasing सुरक्षितपणे.

प्रतिमा २: तपशीलवार view of the circuit board, highlighting the SIM card slot and the connector for the external antenna.

2.3 अँटेना कनेक्शन

Connect the provided antenna to the designated connector on the controller's circuit board. Ensure it is finger-tight to maintain a stable signal connection.

2.4 वीज जोडणी

Connect the device to a 12-24V DC power source. Observe polarity to prevent damage. The power input terminals are typically labeled on the device.

2.5 रिले कनेक्शन

Connect the devices you wish to control to the seven independent relay terminals. Refer to the wiring diagram (if provided separately or on the device itself) for correct connections. Each relay can be configured for normally open (NO) or normally closed (NC) operation depending on your application.

४.४ प्रारंभिक प्रोग्रामिंग

The controller can be programmed using SMS commands or PC software via the USB programming adapter. For initial setup, it is recommended to use the PC software for comprehensive configuration, including setting authorized phone numbers and default relay states.

• SMS Programming: Send specific SMS commands to the controller's SIM card number to configure settings. Refer to the command list in this manual or the full manual for details.
• पीसी सॉफ्टवेअर प्रोग्रामिंग: Connect the controller to a computer using the USB cable and programming adapter. Use the dedicated software to access and modify all settings.

3. ऑपरेटिंग सूचना

3.1 Activating Relays via Phone Call

To activate Relay No. 1, dial the phone number of the SIM card inserted in the controller from an authorized phone number. The controller will reject the call and activate the relay without answering, thus incurring no call charges. This method is typically for Relay No. 1 only.

3.2 Controlling Relays via SMS Commands

All seven relays can be controlled using specific SMS commands. These commands allow you to switch relays ON/OFF, set pulse timing, and change operational modes.

• स्विच मोड: Relays remain in their activated state until another command is received.
• Pulse Timing Mode: Relays activate for a predefined duration and then automatically switch off.
• Example Command (Illustrative): To turn on Relay 2, you might send an SMS like "RELAY2ON" (actual commands will be specified in the full manual or software).

3.3 पासवर्ड व्यवस्थापन

The device supports remote password operations and password changes via SMS or PC software to enhance security. Ensure your password is kept confidential.

3.4 SMS Reply Function

The SMS reply function can be disabled to reduce operational costs. This setting can be configured through SMS commands or the PC software.

3.5 Equipment Operation History Log

The controller maintains a history log of operations. This log can be accessed and reviewed via PC software to monitor device activity.

Image 3.1: The Sonew controller in a typical application, demonstrating its capability to remotely control devices such as a garage door.

4. देखभाल

The Sonew 7 Channel GSM Remote Switch Controller is designed for low maintenance.

• स्वच्छता: उपकरण स्वच्छ आणि धूळमुक्त ठेवा. स्वच्छतेसाठी मऊ, कोरडे कापड वापरा. ​​द्रव क्लीनर किंवा सॉल्व्हेंट्स वापरू नका.
• पर्यावरणीय परिस्थिती: Ensure the device is operated within its specified temperature and humidity ranges. Avoid exposure to extreme conditions, direct sunlight, or moisture.
• कनेक्शन तपासणी: Periodically check all wiring connections (power, relays, antenna) to ensure they are secure and free from corrosion.
• फर्मवेअर अद्यतने: निर्मात्याची तपासणी करा website periodically for any available firmware updates that may improve performance or add features.

5. समस्या निवारण

६.१ डिव्हाइस प्रतिसाद देत नाही

• शक्ती तपासा: Ensure the device is properly connected to a 12-24V DC power source and receiving power.
• सिम कार्ड: Verify that the SIM card is correctly inserted and active. Check if the SIM card has sufficient credit or an active plan for calls/SMS.
• नेटवर्क सिग्नल: Ensure the device is in an area with adequate 4G/3G/GSM network coverage. The antenna should be securely connected.
• Authorized Numbers: Confirm that the phone number you are using to control the device is registered as an authorized number in the controller's settings.
• प्रोग्रामिंग: Re-check your programming settings via SMS or PC software to ensure commands are correctly configured.

5.2 Relays Not Activating

• वायरिंग: Inspect the wiring connections to the relays and the connected equipment. Ensure they are secure and correctly wired (NO/NC).
• कमांड सिंटॅक्स: Double-check the SMS command syntax. Even minor errors can prevent commands from being recognized.
• Power to Controlled Device: Ensure the device connected to the relay has its own power supply, if required.
• रिले मोड: Verify if the relay is set to the correct mode (switch or pulse timing) for your application.

5.3 Incorrect Frequency Band (US vs. European/Australian)

The device is available in different frequency versions (US, European, Australian). If the device is not functioning, ensure you have the correct version for your region's mobile network frequencies. Using a device designed for a different region will result in network connectivity issues.

6. तपशील

7. वॉरंटी माहिती

Specific warranty details for the Sonew 7 Channel GSM Remote Switch Controller are not available in the provided product data. Please refer to the product packaging, the manufacturer's official website, or contact your point of purchase for comprehensive warranty information.

8. समर्थन

For technical assistance, further inquiries, or to download the latest software and firmware, please visit the official Sonew webसाइट किंवा त्यांच्या ग्राहक समर्थनाशी संपर्क साधा.

निर्माता: सोनव
Webसाइट: Visit the Sonew Store on Amazon (for general brand information, specific support links may vary)