AKO 372920

AKO Sun Power S 250 Solar Fence Energizer

वापरकर्ता मॅन्युअल

परिचय

The AKO Sun Power S 250 is a highly efficient, compact solar fence energizer designed for reliable operation in various agricultural settings. This device is ideal for managing paddocks and small fences, particularly those without dense vegetation, ensuring the safety and containment of your animals.

Equipped with intelligent battery management, the Sun Power S 250 offers extended autonomy, capable of operating for up to two weeks without direct sunlight. It also features deep discharge protection, indicated by a red flashing light when battery voltage drops below 11.2 V, safeguarding the battery's lifespan.

AKO Sun Power S 250 Solar Fence Energizer front view

आकृती 1: समोर view of the AKO Sun Power S 250 Solar Fence Energizer, showcasing its integrated solar panel and robust green casing.

सेटअप

Proper setup is crucial for the optimal performance of your AKO Sun Power S 250. Follow these steps to ensure effective operation:

  1. प्लेसमेंट: Choose a location for the energizer that receives maximum direct sunlight throughout the day. Avoid shaded areas from trees, buildings, or dense vegetation. The solar panel should face south (in the Northern Hemisphere) for best results.
  2. माउंटिंग: The energizer can be mounted on a fence post or a dedicated stand. Ensure it is securely fastened to prevent movement or damage from wind or animals.
  3. ग्राउंडिंग: Connect the energizer's ground terminal (usually marked with a ground symbol or "EARTH") to a suitable ground rod. The ground rod should be driven deep into moist soil, away from other electrical grounds. A good ground system is essential for effective fence performance.
  4. कुंपण कनेक्शन: Connect the energizer's fence terminal (usually marked with a lightning bolt or "FENCE") to your electric fence line. Use insulated wire designed for electric fences to prevent energy loss.
  5. बॅटरी कनेक्शन: Ensure the internal 12V battery is properly connected. The intelligent battery management system will optimize charging from the solar panel.
AKO Sun Power S 250 mounted on a fence post with horses in the background

Figure 2: The AKO Sun Power S 250 installed on a wooden fence post, demonstrating its use in a pasture with horses. The solar panel is clearly visible, positioned to capture sunlight.

AKO Sun Power S 250 mounted on a fence post with electric fence tape

आकृती २.२: जवळचा view of the AKO Sun Power S 250 attached to a fence post, with white electric fence tape extending from it. This illustrates a typical installation scenario for small fences.

ऑपरेटिंग सूचना

Once properly set up, the AKO Sun Power S 250 operates largely autonomously. Here are key operational aspects:

मागील view of AKO Sun Power S 250 showing battery compartment and terminals

आकृती 4: मागील view of the AKO Sun Power S 250, showing the battery compartment, power switch, and connection terminals for fence and ground wires. This view is essential for understanding wiring and controls.

देखभाल

Regular maintenance ensures the longevity and efficiency of your solar fence energizer:

समस्यानिवारण

If your AKO Sun Power S 250 is not performing as expected, consider the following common issues and solutions:

समस्यासंभाव्य कारणउपाय
No fence pulse / Weak pulse
  • कमी बॅटरी व्हॉल्यूमtage
  • खराब ग्राउंडिंग
  • Fence shorting out (vegetation, broken insulators)
  • सैल कनेक्शन
  • Ensure solar panel is clean and receiving direct sunlight. Allow time for battery to charge.
  • Check ground rod connection and ensure it's in moist soil. Add more ground rods if necessary.
  • Inspect fence line for vegetation touching wires or damaged insulators. Clear vegetation and repair insulators.
  • Tighten all connections at the energizer and along the fence line.
Red light flashing (low battery indicator)
  • चार्जिंगसाठी अपुरा सूर्यप्रकाश
  • Excessive fence load (short circuit)
  • बॅटरीचे आयुष्य संपत आले आहे
  • Relocate energizer to a sunnier spot or clear obstructions.
  • Check fence for shorts.
  • Consider replacing the 12V battery if it no longer holds a charge.
Energizer not turning on
  • उर्जा स्विच बंद आहे
  • पूर्णपणे डिस्चार्ज केलेली बॅटरी
  • अंतर्गत दोष
  • पॉवर स्विच "चालू" स्थितीत असल्याची खात्री करा.
  • Allow unit to charge in direct sunlight for at least 24-48 hours.
  • If issues persist after charging and checking connections, contact customer support.

तपशील

वैशिष्ट्यतपशील
मॉडेल क्रमांक372920
ब्रँडAKO
उर्जा स्त्रोत12V Solar Powered
Maximum Fence Length (without vegetation)3 किमी पर्यंत
बॅटरी व्यवस्थापनIntelligent battery management with deep discharge protection
कमी बॅटरी इंडिकेटरRed flashing light at <11.2 V
पॅकेजचे परिमाण31 x 25 x 17 सेमी
आयटम वजन3.91 किलोग्रॅम
उत्पादकअल्बर्ट केर्बल जीएमबीएच

हमी आणि समर्थन

For specific warranty details and customer support, please refer to the documentation provided with your purchase or visit the official AKO webसाइट. वॉरंटी अटी सामान्यतः उत्पादन दोषांना व्यापतात आणि प्रदेश आणि किरकोळ विक्रेत्यानुसार बदलतात.

For technical assistance, troubleshooting beyond this manual, or spare parts inquiries, please contact AKO customer service or your authorized dealer. Keep your purchase receipt and model number (372920) handy when contacting support.

Note: Information regarding spare parts availability was not provided in the product data. Please consult the manufacturer for details.

संबंधित कागदपत्रे - 372920

प्रीview AKO गॅस लीक डिटेक्शन अलार्म वापरकर्ता मॅन्युअल: मॉडेल AKO-55624 आणि AKO-55724
AKO गॅस लीक डिटेक्शन अलार्म सिस्टीमसाठी व्यापक वापरकर्ता पुस्तिका, ज्यामध्ये AKO-55624 आणि AKO-55724 मॉडेल्स समाविष्ट आहेत. उपकरणांचे वर्णन, स्थापना, कॉन्फिगरेशन, ऑपरेशन, तांत्रिक वैशिष्ट्ये आणि अॅक्सेसरीज समाविष्ट आहेत.
प्रीview मॅन्युअल डी Usuario ट्रान्समिसर डी गॅस V3 AKO-575xxx
मॅन्युअल डी usuario detallado para el Transmisor de Gas V3 AKO-575xxx de AKO Electromecánica. Cubre instalación, funcionamiento, configuración, mantenimiento, especificaciones técnicas y accesorios.
प्रीview AKO-575xxx गॅस ट्रान्समीटर वापरकर्ता मॅन्युअल
AKO-575xxx गॅस ट्रान्समीटरसाठी व्यापक वापरकर्ता पुस्तिका, ज्यामध्ये स्थापना, ऑपरेशन, कॉन्फिगरेशन, देखभाल, तांत्रिक वैशिष्ट्ये आणि समस्यानिवारण यांचा समावेश आहे.
प्रीview AKO V3 गॅस ट्रान्समीटर वापरकर्ता मॅन्युअल
AKO V3 गॅस ट्रान्समीटर (मॉडेल AKO-575xxx) साठी वापरकर्ता पुस्तिका, ज्यामध्ये अचूक गॅस शोधण्यासाठी स्थापना, ऑपरेशन, कॉन्फिगरेशन आणि तांत्रिक तपशीलांचा तपशील आहे. NB-IoT क्लाउड इंटिग्रेशन माहिती समाविष्ट आहे.
प्रीview AKO-575xxx Gasgeber V3 Benutzerhandbuch
Umfassendes Benutzerhandbuch für den AKO-575xxx Gasgeber V3 von AKO. Enthält detaillierte Anleitungen zu Installation, Konfiguration, Betrieb, Wartung und technischen Daten für professionelle Anwendungen.
प्रीview AKO-555244 अलार्म कंट्रोल युनिट - सूचना आणि तांत्रिक मॅन्युअल
मशीन रूम आणि चेंबर सुरक्षिततेसाठी डिझाइन केलेल्या AKO-555244 अलार्म कंट्रोल युनिटसाठी व्यापक सूचना आणि तांत्रिक वैशिष्ट्ये. स्थापना, कनेक्शन, कॉन्फिगरेशन, ऑपरेशन, पॅरामीटर्स आणि तांत्रिक तपशील समाविष्ट आहेत.