Hayward TigerShark QC Robotic Pool Cleaner Instruction Manual

1. परिचय

This manual provides essential information for the safe and efficient operation and maintenance of your Hayward TigerShark QC Robotic Pool Cleaner. Please read all instructions carefully before using the cleaner to ensure optimal performance and longevity of the product.

The Hayward TigerShark QC is designed for in-ground pools up to 20 x 40 ft, offering advanced cleaning of the pool floor, walls, coves, and waterline. It features an exclusive 90-minute Quick Clean cycle for rapid cleaning and a standard 4-hour complete cycle.

प्रतिमा 1.1: समोर view of the Hayward TigerShark QC Robotic Pool Cleaner.

2. सुरक्षितता माहिती

दुखापत किंवा नुकसान होण्याचा धोका कमी करण्यासाठी नेहमी खालील सुरक्षा खबरदारी पाळा:

• Read and follow all instructions in this manual and on the cleaner itself.
• Do not operate the cleaner if the power cord is damaged. Contact customer support for replacement.
• Ensure the power supply is connected to a grounded outlet.
• Never enter the pool while the cleaner is operating.
• कोणतीही देखभाल किंवा साफसफाईची कामे करण्यापूर्वी नेहमी वीजपुरवठा खंडित करा.
• Keep the power supply unit away from the pool edge to prevent it from falling into the water.
• हे उपकरण कमी झालेल्या शारीरिक, संवेदनाक्षम किंवा मानसिक क्षमता किंवा अनुभव आणि ज्ञानाचा अभाव असलेल्या व्यक्तींच्या वापरासाठी हेतू नाही, जोपर्यंत त्यांना त्यांच्या सुरक्षिततेसाठी जबाबदार असलेल्या एखाद्या व्यक्तीद्वारे उपकरणाच्या वापराबाबत पर्यवेक्षण किंवा सूचना दिल्या जात नाहीत.

3. उत्पादन संपलेview

The Hayward TigerShark QC Robotic Pool Cleaner is an automatic pool vacuum designed for efficient and thorough cleaning. Key features include:

• Microprocessor-Based Technology: Ensures comprehensive coverage of pool surfaces.
• Quick Clean Cycle: An exclusive 90-minute cycle for fast cleaning.
• पूर्ण चक्र: A standard 4-hour cycle for thorough cleaning.
• On-Board Pump: Provides powerful vacuum suction for debris pickup.
• Simple Filter Cartridge: Easy to access and clean for hassle-free maintenance.
• स्वतंत्र ऑपरेशन: Runs separately from the pool's filtration system, requiring no extra hoses or pumps.
• ऊर्जा कार्यक्षम: Powered by an efficient 24-volt motor.

Image 3.1: The TigerShark QC effectively cleans pool floor, walls, coves, and waterline.

4. सेटअप

Follow these steps to set up your Hayward TigerShark QC Robotic Pool Cleaner:

1. क्लीनर अनपॅक करा: Carefully remove the cleaner and its components from the packaging.
2. वीज पुरवठा कनेक्ट करा: Connect the floating cable from the cleaner to the power supply unit. Ensure the connection is secure.
3. Position Power Supply: Place the power supply unit at least 10 feet (3 meters) from the edge of the pool. Ensure it is in a dry, shaded area and connected to a properly grounded 115-volt outlet.
4. Place Cleaner in Pool: Gently lower the cleaner into the pool. Allow it to sink to the bottom. Ensure the floating cable is untangled and has enough slack to reach all areas of the pool.

Image 4.1: The cleaner can be easily transported and set up using a caddy (sold separately).

Image 4.2: The cleaner operates without charging, connecting directly to a power source.

5. ऑपरेटिंग सूचना

Once the cleaner is properly set up and submerged in the pool, you can begin the cleaning cycle.

1. Select Cleaning Cycle: The TigerShark QC offers two cleaning modes:
   • Quick Clean (90 minutes): Ideal for a rapid touch-up of the pool floor, walls, coves, and waterline.
   • Complete Cycle (4 hours): For a thorough cleaning of the entire pool.
   Refer to the power supply unit for cycle selection.
2. साफसफाई सुरू करा: Press the appropriate button on the power supply unit to start the desired cleaning cycle. The cleaner will begin its programmed cleaning pattern.
3. मॉनिटर ऑपरेशन: Allow the cleaner to complete its cycle. It will automatically shut off once the cycle is finished.
4. Retrieve Cleaner: After the cycle is complete and the cleaner has shut off, gently pull the floating cable to bring the cleaner to the surface. Use the handle to lift it out of the water. Avoid pulling the cleaner out of the water by its cable.

Image 5.1: The cleaner offers both a 90-minute Quick Clean and a 4-hour complete cycle.

6. देखभाल

Regular maintenance ensures the longevity and optimal performance of your pool cleaner.

1. Empty and Rinse Filter Cartridge: After each cleaning cycle, or as needed, remove the filter cartridge from the cleaner. Open the cleaner, remove the cartridge, and rinse it thoroughly with a garden hose to remove all debris. Ensure the cartridge is clean before reinserting it.
2. Rinse Cleaner: After removing the filter, rinse the exterior of the cleaner with clean water to remove any pool chemicals or debris.
3. केबलची तपासणी करा: Periodically inspect the floating cable for any tangles or damage. Untangle the cable as needed to prevent kinks.
4. स्टोरेज: When not in use, store the cleaner in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the cable is neatly coiled to prevent damage.

Image 6.1: The filter cartridge is easily removed and rinsed for simple maintenance.

7. समस्या निवारण

If you encounter issues with your Hayward TigerShark QC, refer to the following common troubleshooting steps:

If the problem persists after attempting these solutions, please contact Hayward Customer Support.

8. तपशील

Image 8.1: Key dimensions and weight of the TigerShark QC cleaner.

9. वॉरंटी माहिती

The Hayward TigerShark QC Robotic Pool Cleaner comes with a मर्यादित वॉरंटी. विशिष्ट अटी, शर्ती आणि कव्हरेज कालावधीसाठी कृपया तुमच्या उत्पादनासोबत असलेले वॉरंटी कार्ड पहा. वॉरंटी दाव्यांसाठी खरेदीचा पुरावा ठेवा.

10. ग्राहक समर्थन

For technical assistance, replacement parts, or warranty inquiries, please contact Hayward Customer Support:

• Webसाइट: अधिकृत हेवर्डला भेट द्या webसमर्थन संसाधने आणि संपर्क माहितीसाठी साइट.
• फोन: Refer to your product packaging or the Hayward webसर्वात अद्ययावत ग्राहक सेवा फोन नंबरसाठी साइट.

When contacting support, please have your product model number (W3RC9990CUB) and serial number ready.