Cudy LT300 4G LTE Wi-Fi Router User Manual

1. परिचय

The Cudy LT300 is a 4G LTE Wi-Fi Router designed to provide high-speed internet access using a cellular SIM card. It supports LTE download speeds of up to 150 Mbps and Wi-Fi speeds of up to 300 Mbps. This manual provides instructions for setting up, configuring, and maintaining your LT300 router.

2. पॅकेज सामग्री

कृपया पॅकेजमधील सामग्री काळजीपूर्वक तपासा. जर कोणतीही वस्तू गहाळ किंवा खराब झाली असेल तर तुमच्या किरकोळ विक्रेत्याशी संपर्क साधा.

• Cudy LT300 4G LTE Wi-Fi Router
• पॉवर अडॅप्टर
• इथरनेट केबल
• Detachable LTE Antennas (x2)
• SIM Card Adapters (Nano to Micro, Nano to Standard)
• द्रुत स्थापना मार्गदर्शक

3. उत्पादन संपलेview

२. हार्डवेअर घटक

Familiarize yourself with the ports, buttons, and LED indicators on your Cudy LT300 router.

आकृती 1: समोर view of the Cudy LT300 router, showing the power, Wi-Fi, LTE signal, and LAN/WAN LED indicators.

• पॉवर एलईडी: शक्ती स्थिती दर्शवते.
• वाय-फाय एलईडी: Indicates Wi-Fi status.
• LTE Signal LEDs: Indicate 4G LTE signal strength.
• लॅन/वॅन एलईडी: Indicate Ethernet port activity.

आकृती 2: मागील view of the Cudy LT300 router, displaying the power port, LAN/WAN ports, SIM card slot, and WPS/Reset button.

• पॉवर पोर्ट: समाविष्ट पॉवर अडॅप्टर कनेक्ट करा.
• लॅन/वॅन पोर्ट: Gigabit Ethernet ports for wired connections. One port can function as WAN for wired internet.
• सिम कार्ड स्लॉट: Insert your 4G LTE SIM card here.
• WPS/रीसेट बटण: Press for WPS function. Press and hold for 5-8 seconds to factory reset.
• अँटेना कनेक्टर: Connect the detachable LTE antennas.

4. सेटअप

4.1. Install LTE Antennas

Screw the two detachable LTE antennas into the connectors on the rear panel of the router. Ensure they are securely tightened and oriented vertically for optimal signal reception.

4.2. सिम कार्ड घाला

The Cudy LT300 uses a standard-sized SIM card. If your SIM card is Nano or Micro, use the provided SIM card adapters to fit it into the standard slot.

1. राउटर बंद असल्याची खात्री करा.
2. मागील पॅनलवर सिम कार्ड स्लॉट शोधा.
3. Insert the SIM card into the slot with the metal contacts facing down and the notched corner oriented correctly, as indicated on the router. Push until it clicks into place.
4. If removing, gently push the SIM card in again until it springs out.

आकृती 3: Illustration of inserting a SIM card into the Cudy LT300 router's SIM card slot.

4.3. पॉवर चालू

Connect the power adapter to the router's power port and then plug the other end into a power outlet. The Power LED will illuminate, and the router will begin to boot up. This process may take approximately 30-60 seconds.

5. कॉन्फिगरेशन

१.४. मध्ये प्रवेश करत आहे Web व्यवस्थापन इंटरफेस

To configure your router, you need to access its web- आधारित व्यवस्थापन इंटरफेस.

1. Connect your computer to the router via Wi-Fi (SSID and password are on the label at the bottom of the router) or an Ethernet cable.
2. उघडा ए web ब्राउझर (उदा., क्रोम, फायरफॉक्स, एज).
3. डीफॉल्ट IP पत्ता टाइप करा 192.168.10.1 अ‍ॅड्रेस बारमध्ये एंटर दाबा.
4. Enter the default login credentials. The default username is प्रशासक आणि डीफॉल्ट पासवर्ड आहे प्रशासक (or as printed on the router label).
5. Follow the on-screen instructions for the initial setup wizard, if prompted. It is recommended to change the default login password for security.

5.2. Basic Wi-Fi Settings

Navigate to the "Wireless" or "Wi-Fi Settings" section in the web interface to customize your wireless network.

• SSID (नेटवर्क नाव): Change the default Wi-Fi network name to a unique name.
• Password (Security Key): Set a strong, secure password for your Wi-Fi network. WPA2-PSK AES is recommended.
• सुरक्षा मोड: Select WPA2-PSK.

5.3. LTE/Internet Settings

The router should automatically detect your SIM card and configure the LTE connection. If not, you may need to manually configure the APN (Access Point Name) settings provided by your mobile operator.

1. Go to the "Network" or "LTE Settings" section.
2. Check the connection status. If "Disconnected" or "Limited," verify APN settings.
3. Select "Manual" APN configuration if automatic fails and enter the correct APN, username, and password from your mobile operator.
4. Save changes and reboot the router if prompted.

5.4. VoLTE Configuration

The Cudy LT300 supports VoLTE functionality. If your SIM card and mobile operator support VoLTE, you may find settings under "Voice" or "VoLTE" in the web interface to enable or configure this feature. Consult your mobile operator for specific VoLTE settings if required.

6. ऑपरेटिंग

6.1. कनेक्टिंग डिव्हाइसेस

• वाय-फाय: On your device (smartphone, tablet, laptop), search for the Wi-Fi network name (SSID) you configured and enter the Wi-Fi password.
• इथरनेट: Connect an Ethernet cable from a LAN port on the router to the Ethernet port on your computer or other wired device.

6.2. एलईडी निर्देशक

Monitor the LED indicators on the front panel to understand the router's status:

• पॉवर एलईडी: Solid Green (On), Off (Off).
• वाय-फाय एलईडी: Solid Green (Wi-Fi On), Blinking (Data Transfer), Off (Wi-Fi Off).
• LTE Signal LEDs: Indicate signal strength (e.g., 3 bars for strong, 1 bar for weak).
• लॅन/वॅन एलईडी: Solid Green (Connected), Blinking (Data Transfer), Off (No Connection).

7. देखभाल

7.1. फर्मवेअर अपडेट

Regularly check for and install firmware updates to ensure optimal performance and security. Firmware files can usually be downloaded from the Cudy official webसाइट

1. नवीनतम फर्मवेअर डाउनलोड करा file for your LT300 model.
2. प्रवेश करा web व्यवस्थापन इंटरफेस.
3. Navigate to "System Tools" or "Firmware Upgrade."
4. डाउनलोड केलेले फर्मवेअर अपलोड करा file आणि स्क्रीनवरील सूचनांचे पालन करा. अपग्रेड प्रक्रियेदरम्यान राउटर बंद करू नका.

7.2. फॅक्टरी रीसेट

A factory reset will restore the router to its default settings. This can be useful for troubleshooting or if you forget your login password.

• With the router powered on, press and hold the WPS/Reset button on the rear panel for 5-8 seconds until the LEDs flash.
• बटण सोडा. राउटर फॅक्टरी डीफॉल्ट सेटिंग्जसह रीबूट होईल.

8. समस्या निवारण

• इंटरनेट कनेक्शन नाही:
  • Check if the SIM card is inserted correctly and activated.
  • Verify LTE signal strength via the LED indicators.
  • Ensure APN settings are correct in the web इंटरफेस
  • Reboot the router and your connected devices.
• प्रवेश करू शकत नाही Web व्यवस्थापन इंटरफेस:
  • तुमचे डिव्हाइस राउटरच्या वाय-फायशी किंवा इथरनेटद्वारे कनेक्ट केलेले असल्याची खात्री करा.
  • Verify the IP address 192.168.10.1 is typed correctly.
  • वेगळा प्रयत्न करा web ब्राउझर
  • Perform a factory reset if you forgot the login password.
• मंद वाय-फाय स्पीड:
  • Check LTE signal strength; a weak signal will affect overall speed.
  • Ensure the router is placed in a central location, away from obstructions and interference.
  • कनेक्टेड डिव्हाइसेसची संख्या किंवा बँडविड्थ-केंद्रित क्रियाकलाप कमी करा.
  • Consider changing the Wi-Fi channel in the web इंटरफेस

9. तपशील

10. सुरक्षितता माहिती

• Do not expose the device to water or humidity.
• डिव्हाइस स्वतः वेगळे करण्याचा किंवा दुरुस्त करण्याचा प्रयत्न करू नका.
• फक्त प्रदान केलेले पॉवर ॲडॉप्टर वापरा.
• डिव्हाइसला उष्णता स्त्रोतांपासून आणि थेट सूर्यप्रकाशापासून दूर ठेवा.
• डिव्हाइसभोवती योग्य वायुवीजन सुनिश्चित करा.

11. हमी आणि समर्थन

For warranty information and technical support, please refer to the warranty card included in the package or visit the official Cudy website. Support resources typically include FAQs, firmware downloads, and contact information.