THOKWOK BT-S3 मोटरसायकल ब्लूटूथ हेडसेट वापरकर्ता मॅन्युअल

1. परिचय

The THOKWOK BT-S3 Motorcycle Bluetooth Headset is designed to provide clear and reliable communication for motorcyclists. Featuring DSP echo cancellation and noise suppression technology, it ensures high-definition audio for calls and music even at speeds up to 110km/h. This system supports full-duplex intercom communication for up to 3 riders over a range of 1000m in open ground. It also includes Bluetooth v3.0 for mobile phone connectivity, stereo music playback, FM radio, and GPS navigation integration. This manual provides detailed instructions for setup, operation, and maintenance of your BT-S3 headset.

2. उत्पादन संपलेview

2.1. पॅकेज सामग्री

Figure 2.1: Package Contents of the THOKWOK BT-S3 Headset.

• 2 x Motorcycle Bluetooth Helmet Intercom Units
• 1 x वापरकर्ता मॅन्युअल
• 2 x USB केबल
• 2 x Headset Clip
• 2 x Velcro Pad
• 2 x Headset (with microphone and speakers)
• 2 x Audio Cable (2.5mm to 3.5mm)
• 2 एक्स स्क्रू ड्रायव्हर

2.2. Headset Components and Controls

आकृती 2.2: समोर view of the THOKWOK BT-S3 Headset, showing control buttons and indicator light.

The BT-S3 headset features intuitive controls for easy operation. Key buttons include the power button (center), plus (+) and minus (-) buttons for volume and navigation, and a multi-function button (X) for various operations.

3. सेटअप आणि स्थापना

Proper installation ensures optimal performance and comfort. The BT-S3 is suitable for most full-face and half-face helmets that cover the ears.

3.1. स्थापना चरण

Figure 3.1: Step-by-step guide for installing the BT-S3 headset into a helmet.

1. क्लिप स्थापना: Install the headset clip on the side of your helmet. Ensure it is securely positioned.
2. स्क्रू लॉक: Use the provided screw driver to tighten the screw lock clip, firmly attaching the clip to the helmet.
3. Clamping Slot: Insert the main headset unit into the clamping slot on the installed clip until it clicks into place.
4. Remove Lining & Fix Microphone/Earphone: Carefully remove the helmet's inner lining. Use the 3M glue or Velcro pads to fix the microphone and earphones inside the helmet, ensuring the speakers are placed directly over your ears for best sound quality.
5. Fix Microphone: Position the microphone near your mouth for clear voice pickup.
6. Socket Insert: Connect the earphone/microphone cable to the main headset unit's socket.

4. ऑपरेशन

4.1. Pairing with a Mobile Phone

1. Turn on BT-S3: Press and hold the power button on the BT-S3 headset until the blue light flashes.
2. फोन ब्लूटूथ सक्षम करा: On your mobile phone, go to Settings and turn on Bluetooth.
3. Find and Pair: साठी शोधा "BT-S3" in the list of available devices and select it to pair. Once connected, the headset will indicate successful pairing.
4. संगीत प्लेबॅक: Click the power button once to play or pause music.
5. आवाज नियंत्रण: Long press the '+' button to increase volume. Long press the '-' button to decrease volume.

4.2. Intercom Pairing (Two Headsets)

The BT-S3 supports intercom communication with other BT-S series headsets.

1. Turn off Phone Bluetooth: Before pairing two headsets, ensure Bluetooth is turned off on your mobile phone to avoid interference.
2. Enter Intercom Pairing Mode: On both headsets, long press the multi-function button (X) until both red and blue lights flash simultaneously. This indicates intercom pairing mode.
3. जोडणी सुरू करा: पॉवर बटणावर क्लिक करा एक of the headsets. The headsets will attempt to pair.
4. पेअरिंग यशस्वी: Once paired, both headsets will flash two blue lights simultaneously, and you will hear a confirmation tone. You can now use the intercom function.
5. Switching to Music Mode: If you were listening to music on your phone, first click the power button on the headset to hang up the intercom. Then, you can listen to music again. To return to intercom, click the power button again.
6. Saving Pairing Records: To save the pairing records of the headsets, long press the power button until the blue lights go out or you hear the sound of 'di'. This will turn off the headsets and save the pairing.

4.3. Intercom Pairing (Three Headsets)

The BT-S3 supports group intercom for up to three riders (A, B, C).

1. Turn off Phone Bluetooth: Ensure Bluetooth is turned off on all mobile phones connected to the headsets.
2. Enter Intercom Pairing Mode: On all three headsets (A, B, and C), long press the multi-function button (X) until both red and blue lights flash simultaneously.
3. Pair A with B: Click the power button on headset A. Headsets A and B will pair.
4. Turn off A and B: Once A and B are paired, turn off both headsets A and B by long pressing their power buttons until the blue lights go out.
5. Pair B with C: Repeat the intercom pairing process: long press the multi-function button (X) on headsets B and C until red and blue lights flash. Then, click the power button on headset B to pair with C.
6. Turn off B and C: Once B and C are paired, turn off both headsets B and C.
7. Final Pairing (A, B, C): Now, turn on all three headsets (A, B, C). They should automatically connect.
8. Initiate Group Intercom: Click the power button on headset A to talk with C.
9. Switch Partners: To switch between partners, click the power button once or twice on headsets B and C.

5. देखभाल आणि काळजी

• स्वच्छता: हेडसेट युनिट सॉफ्ट, डी ने पुसून टाका.amp कापड कठोर रसायने किंवा अपघर्षक क्लीनर वापरणे टाळा.
• पाणी प्रतिकार: The unit features an all-silica gel waterproof design, allowing use in rainy or snowy conditions. However, avoid submerging the device in water.
• स्टोरेज: Store the headset in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
• बॅटरी काळजी: For optimal battery life, charge the device regularly. Avoid fully discharging the battery frequently.

6. समस्या निवारण

7. तपशील

8. हमी आणि समर्थन

For warranty information and technical support, please refer to the contact details provided with your product packaging or visit the official THOKWOK webजागा. वॉरंटी दाव्यांसाठी तुमची खरेदी पावती ठेवा.