पॅकेज सामग्री
खाली सूचीबद्ध केलेल्या सर्व वस्तू तुमच्या पॅकेजमध्ये आहेत याची खात्री करा:
- DSC PC1404 Control Panel Board
- DSC PC1404 Keypad
- Metal Enclosure Box
सेटअप आणि स्थापना
1. Mounting the Metal Enclosure Box
Select a secure, dry location for mounting the metal enclosure box. Ensure it is easily accessible for wiring but out of reach of unauthorized personnel.
Image: The open metal enclosure box, showing pre-drilled mounting holes and internal layout for component installation.
- Mark the desired mounting points on the wall using the enclosure's pre-drilled holes as a template.
- Drill pilot holes if necessary and secure the enclosure to the wall using appropriate fasteners.
2. Installing the Control Panel Board
Carefully install the PC1404 control panel board inside the metal enclosure. Ensure it is securely fastened to prevent movement.
Image: The green circuit board of the DSC PC1404 control panel, showing various electronic components and terminal blocks.
- Align the control panel board with the standoffs inside the enclosure.
- Secure the board using the provided screws or clips.
3. Connecting the Keypad
Connect the PC1404 keypad to the control panel using the appropriate wiring. Refer to the wiring diagram for correct terminal connections.
Image: The white DSC PC1404 keypad with numerical buttons and function keys, used for arming and disarming the alarm system.
- Connect the keypad's red, black, yellow, and green wires to the corresponding terminals on the control panel.
- सर्व कनेक्शन सुरक्षित आणि योग्यरित्या इन्सुलेटेड असल्याची खात्री करा.
4. वीज जोडणी
Connect the system to a reliable power source. The PC1404 operates on corded electric power.
- Connect the AC transformer to the control panel's AC terminals.
- Connect the backup battery (if applicable) to the battery terminals.
- Plug the AC transformer into a non-switched electrical outlet.
ऑपरेटिंग सूचना
सिस्टमला सशस्त्र करणे
To arm the system, ensure all zones are closed (no open doors/windows). Enter your 4-digit user code on the keypad.
- सशस्त्र राहा: दाबा [राहणे] then your user code. This arms the perimeter zones, allowing movement within the protected area.
- दूर आर्मिंग: दाबा [Away] then your user code. This arms all zones, including interior motion detectors.
प्रणाली नि:शस्त्र करणे
To disarm the system, enter your 4-digit user code. This will silence any active alarms and disarm all zones.
झोन बायपास करणे
If a zone needs to be temporarily disarmed while the rest of the system is armed, you can bypass it.
- दाबा [*] नंतर [८].
- Enter the 2-digit zone number(s) to bypass.
- दाबा [#] बाहेर पडण्यासाठी
देखभाल
Regular maintenance ensures the optimal performance and longevity of your DSC alarm system.
- बॅटरी तपासणी: Test the backup battery annually. Replace if it fails to hold a charge.
- सिस्टम चाचणी: Perform a full system test monthly, including all sensors and the siren, to ensure proper functionality.
- स्वच्छता: Gently wipe the keypad and control panel enclosure with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- वायरिंग तपासणी: Periodically inspect all wiring for signs of wear, damage, or loose connections.
हमी आणि समर्थन
For specific warranty information, please refer to the documentation provided at the time of purchase or contact your authorized DSC dealer. For technical assistance or questions regarding system configuration, please reach out to your installer or the product support team.
Note: Manuals may be sent via email for smaller postage charges. For any questions about support or building an alarm system, feel free to ask.
