Artemide Tolomeo Mini 100W E26 Table Lamp वापरकर्ता मॅन्युअल

1. परिचय

This manual provides comprehensive instructions for the safe and efficient use of your Artemide Tolomeo Mini 100W E26 Table Lamp. Please read this manual thoroughly before installation and operation, and retain it for future reference. The Artemide Tolomeo Mini is designed for indoor use, offering adjustable illumination with its articulated aluminum arm and shade.

2. सुरक्षितता माहिती

• एल याची खात्री कराamp is connected to a power source within the specified voltage श्रेणी (120V).
• Do not exceed the maximum bulb wattage of 100W. Use an E26 (medium base) A19 compatible incandescent, compact fluorescent, or LED lamp.
• Always disconnect the power before cleaning, performing maintenance, or replacing the bulb.
• एल ठेवणे टाळाamp in areas with excessive moisture or extreme temperatures.
• l मध्ये बदल करण्याचा प्रयत्न करू नकाamp's electrical components. Refer servicing to qualified personnel.
• एल ठेवाamp ज्वलनशील पदार्थांपासून दूर.

3. पॅकेज सामग्री

असेंब्ली सुरू करण्यापूर्वी सर्व घटक उपस्थित आहेत याची खात्री करा:

• Artemide Tolomeo Mini Lamp Arm and Head Assembly
• अल्युमिनियम बेस
• सावली
• पॉवर कॉर्ड

Image 3.1: All components of the Artemide Tolomeo Mini Table Lamp, including the articulated arm, lamp head, base, and power cord.

४. सेटअप सूचना

1. अनपॅक घटक: Carefully remove all parts from the packaging and place them on a clean, flat surface.
2. बेस संलग्न करा: एल सुरक्षितपणे जोडाamp's articulated arm assembly to the aluminum base. Ensure the connection is firm and stable.
3. बल्ब स्थापित करा: Insert an E26 (medium base) A19 compatible bulb (not included) into the lamp head socket. Do not exceed 100W.
4. एल ची स्थिती ठेवाamp: एल ठेवाamp स्थिर, सपाट पृष्ठभागावर.
5. वीज कनेक्ट करा: पॉवर कॉर्ड एका मानक 120V इलेक्ट्रिकल आउटलेटमध्ये प्लग करा.

Image 4.1: The Artemide Tolomeo Mini Table Lamp पूर्णपणे एकत्रित आणि वापरासाठी तयार.

5. ऑपरेटिंग सूचना

• चालू/बंद करणे: एलamp features an On/Off switch located on the lamp head. Press or touch the switch to turn the light on or off.
• स्थिती समायोजित करणे: एलamp's arm structure, made of extruded aluminum, and joints with tension control knobs allow for full adjustability. Gently manipulate the arm and head to direct light as desired. The shade offers 360-degree rotation.

6. देखभाल

• स्वच्छता: l डिस्कनेक्ट कराamp from power. Use a soft, dry cloth to wipe down the aluminum surfaces and shade. Avoid abrasive cleaners or solvents.
• बल्ब बदलणे: एल याची खात्री कराamp is unplugged and the bulb has cooled completely. Unscrew the old bulb and screw in a new E26 (medium base) A19 compatible bulb, not exceeding 100W.
• Joint Tension: The tension control knobs on the joints can be adjusted if the arm becomes too loose or too stiff. Turn clockwise to tighten, counter-clockwise to loosen.

7. समस्या निवारण

Lamp चालू होत नाही:

Check if the power cord is securely plugged into the outlet and the lamp. Verify that the bulb is correctly installed and not burnt out. Test the outlet with another device.

प्रकाश चमकतो:

Ensure the bulb is screwed in tightly. If using an LED bulb, confirm it is dimmable if connected to a dimmer switch (though this lamp has an On/Off switch on the head). Try a different bulb.

Arm does not hold position:

Adjust the tension control knobs on the joints. Tighten them slightly until the arm holds its desired position.

8. तपशील

9. हमी आणि समर्थन

For warranty information, product support, or to inquire about replacement parts, please contact Artemide directly through their official website or customer service channels. Specific warranty terms and conditions may vary and are provided by the manufacturer.