1. परिचय
This manual provides essential information for the safe and effective operation of your Tektronix Digital Storage Oscilloscope, Model B07GCZSDRJ. This device is designed for precise measurement and analysis of electronic signals. Please read this manual thoroughly before using the instrument to ensure proper functionality and to prevent damage or injury.
2. सुरक्षितता माहिती
Always observe the following safety precautions to prevent injury and avoid damage to this product or any products connected to it.
- निर्दिष्ट केल्याप्रमाणेच उत्पादन वापरा.
- उत्पादन खराब झाल्यास वापरू नका.
- Perform initial safety checks before connecting to power.
- अर्हताप्राप्त कर्मचाऱ्यांना सर्व्हिसिंगचा संदर्भ द्या.
- ओव्हरहाटिंग टाळण्यासाठी योग्य वायुवीजन सुनिश्चित करा.
- ओले किंवा डी मध्ये ऑपरेट करू नकाamp परिस्थिती
3. सेटअप
Follow these steps to set up your oscilloscope for the first time:
- Unpack the Instrument: Carefully remove the oscilloscope and all accessories from the packaging. Inspect for any visible damage.
- वीज कनेक्ट करा: Connect the provided power cord to the AC input on the rear panel of the oscilloscope, then plug it into a grounded electrical outlet.
- पॉवर चालू: Press the power button, usually located on the front panel. The display should illuminate.
- Probe Compensation: If using probes, connect a probe to Channel 1 and the probe compensation output. Adjust the probe compensation until a flat-top square wave is displayed.
This image serves as a placeholder and indicates that a specific product image is not available for display. It typically shows text like 'No image available' with a generic Amazon smile logo.
4. ऑपरेटिंग सूचना
This section covers basic operation of the oscilloscope.
- Vertical Controls: Use the VOLTS/DIV knob to adjust the vertical scale (voltage per division) and the position knob to move the waveform vertically.
- Horizontal Controls: Use the SEC/DIV knob to adjust the horizontal scale (time per division) and the position knob to move the waveform horizontally.
- ट्रिगर सिस्टम: The trigger controls stabilize repetitive waveforms. Adjust the trigger level and mode (e.g., Edge, Pulse) to capture the desired part of the signal.
- मापन कार्ये: Access built-in measurement functions (e.g., Vpp, RMS, Frequency) via the 'Measure' or 'Menu' buttons.
5. देखभाल
Proper maintenance ensures the longevity and accuracy of your oscilloscope.
- स्वच्छता: इन्स्ट्रुमेंटचा बाह्य भाग मऊ, डीamp cloth. Do not use abrasive cleaners or solvents. Ensure the instrument is powered off and unplugged before cleaning.
- कॅलिब्रेशन: Regular calibration by qualified service personnel is recommended to maintain measurement accuracy. Refer to the service manual for calibration procedures.
- स्टोरेज: When not in use, store the oscilloscope in a clean, dry environment, away from direct sunlight and extreme temperatures.
6. समस्या निवारण
हा विभाग तुम्हाला येऊ शकणाऱ्या सामान्य समस्यांचे निराकरण प्रदान करतो.
| समस्या | संभाव्य कारण | उपाय |
|---|---|---|
| चालू झाल्यानंतर प्रदर्शन नाही | Power cord not connected; Power outlet fault; Internal fuse blown | Check power cord connection; Test power outlet; Contact service for fuse replacement |
| No waveform displayed | Input signal too small; Probe not connected; Trigger settings incorrect | Increase VOLTS/DIV; Check probe connection; Adjust trigger level and mode |
| Waveform unstable or rolling | Trigger level incorrect; Trigger source not selected; Input signal noisy | Adjust trigger level; Select correct trigger source; Use averaging mode for noisy signals |
7. तपशील
Key technical specifications for the Tektronix Digital Storage Oscilloscope, Model B07GCZSDRJ.
| तपशील | मूल्य |
|---|---|
| ASIN | B07GCZSDRJ |
| उत्पादक | टेक्ट्रॉनिक्स |
| तारीख प्रथम उपलब्ध | 11 ऑगस्ट 2018 |
8. हमी आणि समर्थन
Tektronix products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Tektronix webसाइट
For technical support, service, or to inquire about replacement parts, please contact Tektronix customer service. You can find contact information on the official Tektronix webसाइटवर किंवा तुमच्या स्थानिक वितरकाद्वारे.
टीप: अनधिकृत दुरुस्ती किंवा बदल तुमची वॉरंटी रद्द करू शकतात.
