वुलू WL666 वायरलेस इंटरकॉम सिस्टम वापरकर्ता मॅन्युअल

1. परिचय

This manual provides detailed instructions for the Wuloo WL666 Wireless Intercom System. Please read this manual thoroughly before operating the device to ensure proper use and to maximize its functionality. The Wuloo WL666 is designed for reliable, clear communication within homes, offices, and businesses, offering a wireless solution without the need for Wi-Fi.

Figure 1: Wuloo WL666 Wireless Intercom System (3-pack)

2. उत्पादनाची वैशिष्ट्ये

• वायरलेस कम्युनिकेशन: Operates on FM wireless technology, eliminating the need for Wi-Fi or complex wiring.
• विस्तारित श्रेणी: Offers a communication range of up to 5280 feet (approximately 1 mile) in open areas, ensuring clear sound quality over long distances.
• Multi-Channel & Code System: Features 10 channels and 3 digital codes (A/B/C) to enhance privacy and prevent interference from other intercoms.
• बहुमुखी कार्ये: Includes Monitor, Talk, VOX (Voice Operated Exchange), Group, and Calling functions for various communication needs.
• पोर्टेबल पॉवर पर्याय: Compatible with 5V 1A power banks for outdoor or mobile use (power bank not included).
• सुलभ स्थापना: भिंतीवर सोयीस्करपणे बसवण्यासाठी मागील छिद्रासह डिझाइन केलेले.

Figure 2: Key features of the Wuloo WL666 Intercom System.

3. पॅकेज सामग्री

The Wuloo WL666 Wireless Intercom System (3-pack) includes the following items:

• 3 x Wuloo WL666 Intercom Units
• 3 x Power Cords (USB to DC 5V)
• 3 x AC Adapters (5V 1A)
• १ x वापरकर्ता मॅन्युअल (हे दस्तऐवज)

Figure 3: Contents of the Wuloo WL666 3-station package.

४. सेटअप सूचना

Follow these steps to set up your Wuloo WL666 Wireless Intercom System:

4.1. Connect AC Power

1. Connect the provided USB power cord to the DC 5V port on the back of each intercom unit.
2. AC अडॅप्टरला मानक वॉल आउटलेटमध्ये प्लग करा.
3. Ensure all units are powered on.

Note: This intercom system does not support batteries. It requires continuous AC power or a compatible power bank (DC 5V 1A) for operation.

4.2. Code Setting (A/B/C)

Each intercom unit has a switch near the power port to select a digital code (A, B, or C). For secure communication, ensure all intercoms intended to communicate with each other are set to the same code.

1. Locate the A/B/C switch on the side of each intercom unit.
2. Slide the switch to select your desired code (A, B, or C). All units in your system should use the same code.

Figure 4: Intercom unit layout with digital code switch highlighted.

4.3. चॅनेल सेटिंग

Each intercom unit can be assigned a unique channel number (0-9). This allows for direct communication between specific units within your system.

1. On each intercom unit, press and hold any channel number key (0-9) for 3 seconds to set its channel. The display will show the selected channel.
2. Assign a different channel number to each unit for individual calling.
3. It is recommended to set all stations to the same code (A, B, or C) but with different channel numbers. This allows you to simply adjust the channel to make calls without needing to set a new code each time.

Figure 5: Visual guide for code and channel settings.

4.4. Address List (Optional for Large Systems)

For larger intercom systems with many units, creating an address list can help you remember which intercoms belong to which users or locations. Record the channel number for each user.

Example: Member A: Code A Channel 1, Member B: Code A Channel 2, etc.

5. ऑपरेटिंग सूचना

5.1. Basic Communication (Call & Talk)

1. To Call Another Unit: Short press the channel number key (0-9) of the intercom unit you wish to communicate with. The receiving unit will ring.
2. बोलणे: After the call rings, press and hold the बोला button to speak. Release the button to listen.
3. आवाज समायोजन: वापरा VOL+ आणि व्हीओएल- buttons to adjust the speaker volume.

5.2. VOX (Voice Operated Exchange) Mode

VOX mode allows for hands-free communication without continuously pressing the TALK button. It activates when it detects a voice within a close speaking range.

1. Activate VOX: दाबा VOX button on your unit. The channel number key will flash blue.
2. Speaking in VOX: Speak close to the microphone to activate VOX mode. The indicator light will turn red, and the number key will stop flashing. You can then speak, and the other unit will receive your voice message.
3. Listening in VOX: The other user can press and hold the बोला button to reply.

Note: VOX mode has a 24-hour time limit. If there are no manual changes to other channels, VOX mode will automatically exit after 24 hours. You need to reset it again every 24 hours for continuous use. Communication in VOX mode may have a slight delay, and it's recommended to speak one by one.

७.४.३. मॉनिटर मोड

Monitor mode allows you to listen to audio from a specific room (e.g., a baby's room) without needing voice activation.

1. Activate Monitor: Place the intercom unit you wish to monitor in the desired room. Press the मॉनिटर button on this unit. The light on the device will turn red, indicating it's in monitored state.
2. ऐकणे: On your listening unit, press and hold the Channel number key for 3 seconds to set the same channel as the monitored unit. You will then receive audio from the monitored room.

Note: The monitored unit will stay in transmit mode and cannot receive any information unless you exit this mode. Keep the device as close as possible to the person being monitored to pick up voice clearly. Monitor mode has a 10-hour time limit. If you need to monitor for a longer period, please reset it every 10 hours.

४. ग्रुप मोड

Group mode allows you to broadcast your voice to all intercom stations simultaneously within your system, even if they are on different channels but the same code.

1. Activate Group Call: दाबा आणि धरून ठेवा गट बटण
2. Speaking in Group: धारण करताना गट button, speak into your unit. Your message will be transmitted to all other units in the system.

Note: To confirm if an intercom station is part of your system, check its frequency and code using the frequency table in the detailed manual.

6. देखभाल

• स्वच्छता: Use a soft, dry cloth to clean the exterior of the intercom units. Do not use liquid cleaners or aerosols.
• स्टोरेज: Store the units in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
• वीज पुरवठा: Always use the original power adapters provided with the system. Using incompatible adapters may damage the device.
• अँटेना काळजी: Handle the antenna gently to avoid bending or breaking it, which could affect signal quality.

7. समस्या निवारण

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Wuloo customer support for assistance.

8. तपशील

9. हमी आणि समर्थन

9.1. वॉरंटी माहिती

Wuloo products are designed for durability and reliability. For specific warranty details, please refer to the warranty card included with your product or visit the official Wuloo webसाइट. वॉरंटी दाव्यांसाठी खरेदीचा पुरावा म्हणून तुमची खरेदी पावती ठेवा.

9.2. ग्राहक समर्थन

For technical assistance, troubleshooting, or any questions regarding your Wuloo WL666 Wireless Intercom System, please contact Wuloo customer support:

• ऑनलाइन समर्थन: ला भेट द्या Wuloo Store on Amazon वारंवार विचारले जाणारे प्रश्न आणि संपर्क पर्यायांसाठी.
• ईमेल: Refer to your product packaging or the Wuloo website for the most current email contact information.

Please have your model number (WL666) and purchase date ready when contacting support.