eufy BoostIQ RoboVac 11S (स्लिम) रोबोट व्हॅक्यूम क्लीनर वापरकर्ता मॅन्युअल

परिचय

This manual provides essential instructions for the safe operation, maintenance, and troubleshooting of your eufy BoostIQ RoboVac 11S (Slim) robot vacuum cleaner. Please read this manual thoroughly before using your RoboVac and retain it for future reference.

महत्त्वाच्या सुरक्षितता सूचना

Always follow basic precautions, including:

• उपकरण वापरण्यापूर्वी सर्व सूचना वाचा.
• Do not operate the RoboVac in areas with open flames or flammable materials.
• केस, सैल कपडे, बोटे आणि शरीराचे सर्व भाग उघड्या आणि हलत्या भागांपासून दूर ठेवा.
• या मॅन्युअलमध्ये वर्णन केल्याप्रमाणेच वापरा.
• डस्ट बिन आणि/किंवा फिल्टर शिवाय वापरू नका.
• मुलांना उपकरणासह खेळू देऊ नका.
• Only use the power adapter supplied by the manufacturer.
• Do not use the appliance to pick up large debris, liquids, or sharp objects.

पॅकेज सामग्री

• 1 x eufy BoostIQ RoboVac 11S (Slim)
• 1 x Remote control (AAA batteries included)
• 1 x Charging Base & Power Adapter
• 1 x स्वच्छता साधन
• 2 x Side Brushes (additional pair)
• 1 x Filter Set (additional set)
• 1 x वापरकर्ता मॅन्युअल
• 1 x द्रुत प्रारंभ मार्गदर्शक
• 1 x हमी माहिती

सेटअप

1. Prepare the RoboVac

• Remove all protective films and stickers from the RoboVac and charging base.
• Attach the side brushes by pressing them onto the square posts until they click.

2. Install the Charging Base

Place the charging base on a hard, level surface against a wall. Ensure there is at least 3 feet (1 meter) of clear space to either side and 6 feet (2 meters) in front of the charging base. Connect the power adapter to the charging base and a wall outlet. The indicator light on the charging base will illuminate.

Image: RoboVac automatically returning to its charging base.

५.१. सुरुवातीचे शुल्क

Place the RoboVac onto the charging base, ensuring the charging pins align. For first-time use, charge the RoboVac for at least 12 hours. The indicator light on the RoboVac will breathe orange while charging and turn solid blue when fully charged.

तुमचा रोबोव्हॅक चालवणे

1. पॉवर चालू/बंद

Press and hold the power button on the RoboVac for 3 seconds to turn it on or off. The indicator light will turn blue when on.

2. साफसफाईची पद्धत

The RoboVac offers several cleaning modes, selectable via the remote control:

• ऑटो क्लीनिंग: The RoboVac cleans automatically using various cleaning patterns. This is the default mode.
• स्पॉट साफ करणे: For concentrated cleaning of a specific area. The RoboVac will clean in a spiral pattern for approximately 2 minutes.
• काठ साफ करणे: The RoboVac cleans along walls and furniture edges.
• एकल खोली साफसफाई: The RoboVac cleans a single room and then returns to its charging base.

Image: Remote control for selecting cleaning modes and scheduling.

४. बूस्टआयक्यू तंत्रज्ञान

The RoboVac automatically increases suction power when extra vacuuming strength is needed, such as when transitioning from hard floors to carpets. This feature activates in approximately 1.5 seconds.

Image: RoboVac activating BoostIQ for increased suction on carpet.

4. वेळापत्रक

Use the remote control to set a cleaning schedule for your RoboVac. Refer to the remote control section in the full manual for detailed instructions on setting schedules.

देखभाल

Regular maintenance ensures optimal performance of your RoboVac.

1. Emptying the Dust Bin

Empty the dust bin after each use. Press the dust bin release button and pull out the bin. Open the dust bin cover and discard debris.

Image: The dust bin removed from the RoboVac, showing collected debris.

2. फिल्टर साफ करणे

Remove the filters from the dust bin. Tap them to remove dust and rinse them under running water. Allow filters to air dry completely before reinstalling. Replace filters every 3-6 months, or as needed.

Image: Diagram illustrating the multi-layer filter system of the RoboVac.

3. Cleaning the Rolling Brush and Side Brushes

Remove the rolling brush cover and lift out the rolling brush. Use the cleaning tool to remove hair and debris. Clean the side brushes by pulling them off and removing any tangled hair or debris. Replace worn side brushes.

4. Cleaning the Sensors and Charging Contacts

Wipe the drop sensors, charging contacts, and swivel wheel with a dry cloth to maintain proper function.

समस्यानिवारण

तपशील

हमी आणि समर्थन

Your eufy BoostIQ RoboVac 11S (Slim) comes with a ६ महिन्यांची वॉरंटी. For technical support, warranty claims, or additional information, please refer to the warranty information card included in your package or visit the official eufy support webसाइट