KING K302PE

King Electric K302PE 7-Day Programmable Double Pole Thermostat User Manual

Model: K302PE

परिचय

This manual provides comprehensive instructions for the installation, operation, and maintenance of your King Electric K302PE 7-Day Programmable Double Pole Thermostat. Please read this manual thoroughly before installation and use to ensure proper function and safety.

सुरक्षितता माहिती

चेतावणी: इलेक्ट्रिक शॉकचा धोका.

  • सर्व स्थानिक आणि राष्ट्रीय विद्युत संहितांनुसार प्रतिष्ठापन पात्र इलेक्ट्रिशियनद्वारे केले पाहिजे.
  • Disconnect power at the circuit breaker before installing or servicing the thermostat.
  • This thermostat is designed for use with electric heating systems only. Do not use with other heating systems.
  • Ensure all wiring connections are secure to prevent fire hazards.

पॅकेज सामग्री

तुमच्या पॅकेजमध्ये खालील आयटम असल्याचे सत्यापित करा:

  • King Electric K302PE Thermostat Unit
  • माउंटिंग स्क्रू
  • वापरकर्ता मॅन्युअल (हा दस्तऐवज)

सेटअप आणि स्थापना

१. स्थान निवडणे

Install the thermostat on an interior wall, approximately 5 feet (1.5 meters) above the floor. Avoid locations near windows, doors, air vents, or direct sunlight, as these can affect temperature readings.

2. वायरिंग सूचना

IMPORTANT: Turn off power to the heating system at the main circuit breaker before proceeding.

  1. Remove the old thermostat (if applicable) and disconnect its wires.
  2. Identify the line voltage wires from your electrical box. This thermostat is designed for 120/208/240-Volt, 15 Amp, Double Pole electric heating systems.
  3. Connect the thermostat wires to the corresponding line voltage wires. Ensure all connections are tight and secure. Refer to the wiring diagram provided with the physical product for precise connections.
  4. Mount the thermostat base to the wall using the provided screws.
  5. Attach the thermostat faceplate to the base.

After installation, restore power at the circuit breaker.

ऑपरेटिंग सूचना

King Electric K302PE Thermostat Display and Buttons

प्रतिमा: समोर view of the King Electric K302PE thermostat, showing the digital display and control buttons. The display shows the current time, day of the week, set temperature, and various mode icons. Buttons include up/down arrows, 'P' for program, an arrow for navigation, and a circular refresh/enter button.

ओव्हर डिस्प्लेview

  • Days of Week: सोम मंगळ बुध गुरु शुक्र शनि रवि
  • वेळ: Displays current time (e.g., 10:00 AM)
  • तापमान सेट करा: Target temperature (e.g., 70°F)
  • हीटिंग इंडिकेटर: Wavy lines icon when heating is active.
  • लॉक चिन्ह: Indicates keypad lock.
  • Program Icons: House icons (1-4) for different program periods (e.g., Wake, Leave, Return, Sleep).
  • Mode Icons: Clock (manual), Sun (day), Moon (night), Briefcase (away/work).

बटण कार्ये

  • Up Arrow (): Increases temperature or navigates up in menus.
  • Down Arrow (): Decreases temperature or navigates down in menus.
  • P (Program): प्रोग्रामिंग मोडमध्ये प्रवेश करतो.
  • उजवा बाण (): Advances through settings or confirms selections.
  • Circular Arrow (): Used for cycling through options or confirming settings.

Initial Setup: Setting Time and Day

  1. Press the 'P' button to enter the setup menu.
  2. Use the Up/Down arrows to adjust the hour, then press the Right Arrow to confirm.
  3. Repeat for minutes and AM/PM.
  4. Use the Up/Down arrows to select the current day of the week, then press the Right Arrow to confirm.
  5. Press the Circular Arrow to exit setup.

Programming a 7-Day Schedule

The K302PE allows for 7-day programming with multiple periods per day (e.g., Wake, Leave, Return, Sleep). Detailed programming steps are typically found in the full product manual. Generally, the process involves:

  1. Press the 'P' button to enter programming mode.
  2. Select the day(s) you wish to program (e.g., Mon-Fri, Sat-Sun, or individual days).
  3. For each program period (e.g., Wake), set the desired start time and temperature using the Up/Down and Right Arrow buttons.
  4. सर्व इच्छित कालावधी आणि दिवसांसाठी पुनरावृत्ती करा.
  5. Press the Circular Arrow to save and exit programming.

Manual Temperature Adjustment (Temporary Hold)

To temporarily override the program schedule:

  1. From the main screen, use the Up/Down arrows to adjust the temperature.
  2. The new temperature will be held until the next scheduled program period begins.

कायमस्वरूपी धरा

To maintain a set temperature indefinitely, consult the full product manual for specific instructions on activating a permanent hold function. This usually involves a combination of button presses.

सिस्टम मोड निवड

The thermostat typically operates in heating mode. If there is an 'Off' mode, it can usually be accessed by pressing a specific button or cycling through options.

देखभाल

Cleaning the Thermostat

थर्मोस्टॅट स्वच्छ करण्यासाठी, बाहेरील भाग मऊ, ड ने हळूवारपणे पुसून टाका.amp cloth. Do not use abrasive cleaners, solvents, or spray cleaners directly onto the unit, as these can damage the display or internal components.

बॅटरी माहिती

This thermostat does not require batteries for operation as it is line-voltagई समर्थित.

समस्यानिवारण

समस्यासंभाव्य कारणउपाय
थर्मोस्टॅट डिस्प्ले रिक्त आहे.थर्मोस्टॅटला वीज नाही.Check the circuit breaker for the heating system. Ensure it is in the 'ON' position. Verify wiring connections.
हीटिंग सिस्टम प्रतिसाद देत नाही.Incorrect wiring; thermostat in 'Off' mode; set temperature is below ambient.Verify wiring connections. Ensure the thermostat is in heating mode. Increase the set temperature above the current room temperature.
तापमान वाचन चुकीचे वाटते.Thermostat location affected by drafts, direct sunlight, or heat sources.Relocate the thermostat to a more suitable interior wall location, away from external influences.
Difficulty programming.Unfamiliarity with programming steps.Review the "Programming a 7-Day Schedule" section in this manual or consult the full product manual for detailed steps.

If problems persist, contact a qualified electrician or King Electric customer support.

तपशील

  • मॉडेल: K302PE
  • ब्रँड: राजा
  • खंडtage: 120/208/240 व्होल्ट
  • Amperage: 15 Amp
  • वाटtage: 3600 वॅट्स
  • नियंत्रण प्रकार: स्पर्श, बटण नियंत्रण
  • डिस्प्ले प्रकार: बॅकलाइटसह डिजिटल
  • प्रोग्रामिंग: 7-दिवस प्रोग्राम करण्यायोग्य
  • माउंटिंग प्रकार: वॉल माउंट
  • साहित्य: ऍक्रेलिक
  • परिमाणे: Approximately 10 x 10 x 10 inches (Note: These may be package dimensions)
  • आयटम वजन: 12.8 औंस

हमी आणि समर्थन

For warranty information or technical assistance, please refer to the official King Electric webसाइटवर किंवा त्यांच्या ग्राहक समर्थनाशी थेट संपर्क साधा. खरेदीचा पुरावा म्हणून तुमची खरेदी पावती ठेवा.

संबंधित कागदपत्रे - K302PE

प्रीview इलेक्ट्रिक हीट कंट्रोलसाठी किंग केआरएफ-हीट-किट वायरलेस २४ व्ही आरएफ थर्मोस्टॅट किट
किंग केआरएफ-हीट-किटसाठी व्यापक मार्गदर्शक, लाइन व्हॉल्यूमसाठी डिझाइन केलेली २४ व्ही आरएफ वायरलेस थर्मोस्टॅट सिस्टमtagई इलेक्ट्रिक हीट कंट्रोल. वैशिष्ट्यांमध्ये KRFTP-B प्रोग्रामेबल थर्मोस्टॅट आणि KRFLR-120/240V रिले समाविष्ट आहेत, ज्यामध्ये तपशीलवार तपशील, ऑर्डरिंग माहिती आणि वाढीव नियंत्रण आणि ऊर्जा बचतीसाठी पर्यायी अॅक्सेसरीज आहेत.
प्रीview किंग पीएक्स इको२एस प्रो ७-दिवसीय प्रोग्रामेबल कंट्रोलर इन्स्टॉलेशन आणि ऑपरेशन मॅन्युअल
किंग पीएक्स इको२एस प्रो ७-दिवसीय प्रोग्रामेबल २-एस साठी व्यापक मार्गदर्शकtagरिमोट टेम्परेचर सेन्सिंगसह इलेक्ट्रॉनिक कंट्रोलर. सुरक्षा सूचना, स्थापना, वायरिंग, वॅट समाविष्ट आहेtage selection, controller pairing, setup, operation modes, programming, troubleshooting, maintenance, and optional sensor integration.
प्रीview HVAC सिस्टीमसाठी किंग वायरलेस 24V RF थर्मोस्टॅट किट KRF-24V-KIT
KRFTP-B थर्मोस्टॅट आणि KRFR-24V HVAC रिले असलेल्या किंग वायरलेस 24V RF थर्मोस्टॅट किट (KRF-24V-KIT) बद्दल माहिती. तपशीलांमध्ये वायरलेस कम्युनिकेशन, प्रोग्रामिंग आणि वर्धित HVAC नियंत्रणासाठी पर्यायी अॅक्सेसरीज समाविष्ट आहेत.
प्रीview किंग केआरएफ-बी-किट वायरलेस २४ व्ही आरएफ मल्टी-सिस्टम थर्मोस्टॅट किट - सबमिट आणि स्पेसिफिकेशन
किंग केआरएफ-बी-किट वायरलेस २४ व्ही आरएफ मल्टी-सिस्टम थर्मोस्टॅट किटसाठी उत्पादन तपशील, ज्यामध्ये सबमिटल शीट फील्ड, सिस्टम डायग्राम, अभियांत्रिकी तपशील, ऑर्डरिंग माहिती आणि पर्यायी अॅक्सेसरीज समाविष्ट आहेत. वैशिष्ट्ये बॅकअप लाइन व्हॉल्यूमtagई विद्युत उष्णता नियंत्रण.
प्रीview किंग एलपीडब्ल्यू इको२एस प्रो हीटर: स्थापना, देखभाल आणि ऑपरेशन मॅन्युअल
किंग एलपीडब्ल्यू इको२एस प्रो ७-दिवसीय प्रोग्रामेबल २-एस साठी व्यापक मार्गदर्शकtagरिमोट टेम्परेचर सेन्सिंग कंट्रोलरसह इलेक्ट्रॉनिक हीटर. इंस्टॉलेशन, वायरिंग, वॅट कव्हर करतेtagनिवड, सेटअप, ऑपरेशन, देखभाल, समस्यानिवारण आणि वॉरंटी माहिती.
प्रीview किंग HW-FS, HWP-FS, HWPT-FS १२०V सिरीज थर्मोस्टॅट इन्स्टॉलेशन, वायरिंग आणि प्रोग्रामिंग मार्गदर्शक
किंग इलेक्ट्रिकच्या HW-FS, HWP-FS आणि HWPT-FS १२०V सिरीज थर्मोस्टॅट्ससाठी व्यापक मार्गदर्शक. सामान्य माहिती, सुरक्षितता, तपशील, वायरिंग सूचना, HWP/HWPT मॉडेल्ससाठी प्रोग्रामिंग, स्थापना आणि देखभाल समाविष्ट करते. निवासी आणि व्यावसायिक हीटिंग सिस्टमसाठी तापमान नियंत्रणाबद्दल तपशील समाविष्ट करते.