Fluke 374 FC 600A AC/DC TRMS Wireless Clamp मीटर वापरकर्ता मॅन्युअल

1. परिचय

This manual provides essential instructions for the safe and effective operation, maintenance, and troubleshooting of your Fluke 374 FC 600A AC/DC TRMS Wireless Clamp Meter. The Fluke 374 FC is designed for advanced troubleshooting performance, offering true-RMS measurements for accurate readings on non-linear signals. It features wireless connectivity via Fluke Connect, allowing for remote measurement viewing and data recording.

2. सुरक्षितता माहिती

Always adhere to safety precautions when using electrical test equipment. Failure to do so may result in injury or damage to the meter or equipment under test.

• सर्व सूचना वाचा: Before operating the meter, thoroughly read and understand all safety and operating instructions.
• रेट केलेले खंडtagई आणि वर्तमान: रेट केलेल्या व्हॉल्यूमपेक्षा जास्त लागू करू नकाtage or current, as marked on the meter, between the terminals or between any terminal and earth ground.
• वैयक्तिक संरक्षणात्मक उपकरणे (PPE): Always wear appropriate PPE, including arc-rated clothing, eye protection, and insulated gloves, when working in hazardous electrical environments.
• वापरण्यापूर्वी तपासणी करा: Before each use, inspect the meter, test leads, and accessories for any damage. Do not use if damaged.
• प्रस्ताव 65 चेतावणी: This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

3. उत्पादन संपलेview

The Fluke 374 FC is a robust clamp meter designed for professional electrical measurements. Its key features include:

• 600 A AC and DC current measurement.
• 2500 A AC current measurement with the optional iFlex flexible current probe.
• True-RMS voltage and current for accurate measurements on non-linear signals.
• Fluke Connect Measurements for wireless connectivity to smartphones.
• Ability to record results directly to your phone and the Cloud.

आकृती 1: समोर view of the Fluke 374 FC Clamp Meter, showing the display, rotary dial, clamp jaws, and function buttons.

आकृती १: कोन असलेला view of the Fluke 374 FC Clamp Meter, highlighting its ergonomic design and robust construction.

4. सेटअप

4.1 बॅटरी इंस्टॉलेशन

The Fluke 374 FC requires two (2) AA batteries for operation.

1. मीटर बंद असल्याची खात्री करा.
2. Locate the battery compartment cover on the rear of the meter.
3. Use a screwdriver to loosen the screw(s) securing the cover.
4. Remove the cover and insert two AA batteries, observing correct polarity (+/-).
5. Replace the battery compartment cover and tighten the screw(s) securely.

4.2 प्रारंभिक पॉवर-ऑन

Turn the rotary dial from the OFF position to any measurement function to power on the meter. The display will illuminate.

4.3 Fluke Connect App Setup

To utilize the wireless capabilities, download the Fluke Connect app on your smartphone or tablet. Follow the in-app instructions to pair your Fluke 374 FC meter.

Figure 3: The Fluke 374 FC Clamp Meter wirelessly connected to a smartphone displaying measurement data via the Fluke Connect app.

5. ऑपरेटिंग सूचना

५.३ एसी/डीसी करंट मापन

1. Turn the rotary dial to the “A” (Amps) position for AC current or “” (DC Amps) for DC current.
2. cl उघडाamp jaws by pressing the trigger.
3. Encircle a single conductor with the clamp जबडे पूर्णपणे बंद असल्याची खात्री करा.
4. Read the current measurement on the display.
5. For DC current measurements, press the “ZERO” button before clamping to eliminate any DC offset.

5.2 खंडtage मोजमाप

1. Connect the test leads to the appropriate input jacks (COM and VΩ).
2. Turn the rotary dial to the “V” (Volts) position.
3. मोजण्यासाठी सर्किट किंवा घटकावर चाचणी प्रोब जोडा.
4. खंड वाचाtage measurement on the display.

5.3 Using the iFlex Flexible Current Probe (Optional)

The iFlex probe allows for current measurements in tight spaces or around large conductors, extending the AC current measurement range up to 2500 A.

1. Plug the iFlex probe into the meter’s dedicated iFlex input jack.
2. Turn the rotary dial to the iFlex position.
3. Wrap the flexible probe around the conductor(s) to be measured. Ensure the probe is securely latched.
4. Read the current measurement on the display.

5.4 Fluke Connect Operation

Once paired, the Fluke Connect app allows you to:

• View live measurements remotely on your smartphone, enhancing safety by allowing you to stand at a safe distance.
• Record measurements directly to your phone and upload them to the Fluke Cloud for analysis and reporting.
• Access historical data and trends.

6. देखभाल

6.1 स्वच्छता

Wipe the meter case with a damp cloth and mild detergent. Do not use abrasives or solvents. Ensure the meter is dry before use.

6.2 बॅटरी बदलणे

Replace batteries when the low battery indicator appears on the display. Refer to Section 4.1 for battery installation instructions.

7. समस्या निवारण

If the meter does not function correctly, consider the following:

• कोणतेही प्रदर्शन नाही: बॅटरीची स्थापना तपासा आणि बॅटरी संपल्या नाहीत याची खात्री करा.
• चुकीचे वाचन: Ensure test leads are properly connected and the correct measurement function is selected. For DC current, ensure the ZERO function has been used.
• Fluke Connect issues: Verify Bluetooth is enabled on your smartphone and the meter, and that the app is up to date.

For persistent issues, contact Fluke customer support.

8. तपशील

२. बॉक्समध्ये काय आहे?

अनपॅक करताना, सर्व वस्तू उपस्थित आहेत याची खात्री करा:

• Fluke 374 FC Clamp मीटर
• TL75 Test Leads
• Batteries (pre-installed or separate)
• कॅरींग केस

Figure 4: The Fluke 374 FC Clamp Meter, test leads, and carrying case as typically included in the product package.

10. हमी आणि समर्थन

Fluke Corporation warrants this product to be free from defects in material and workmanship under normal use and service. The specific warranty period and terms are detailed in the warranty statement provided with your product or available on the official Fluke webसाइट

For technical support, service, or warranty claims, please contact Fluke customer service through their official website or authorized service centers. Always provide your product model number (374 FC) and serial number when seeking support.