Okin BetaDrive Linear Actuator Motor 1.25.000.073.30 User Manual

1. उत्पादन संपलेview

The Okin BetaDrive Linear Actuator Motor, part number 1.25.000.073.30 (also known as MTR157), is a replacement motor designed for power recliners and lift chairs. This motor is responsible for the smooth opening and closing of the lift mechanism, restoring full functionality to your furniture.

• मॉडेल: 1.25.000.073.30 / MTR157
• ब्रँड: Okin (Manufactured by Okin America)
• कार्य: Operates the lift mechanism in power recliners and lift chairs.

प्रतिमा २.१: पूर्ण view of the Okin BetaDrive Linear Actuator Motor. This image displays the complete unit, including the motor housing, linear shaft, and mounting brackets.

2. सुरक्षितता माहिती

WARNING: Always prioritize safety during installation and operation.

• नेहमी विधानसभा सूचना काळजीपूर्वक वाचा आणि त्यांचे पालन करा.
• Do not attempt to operate the chair until it is fully assembled and all connections are secure.
• Keep fingers, clothing, and other body parts clear of the lift mechanism and moving parts while the chair is in use to prevent injury.
• Do not exceed the maximum weight capacity of the chair as specified by the chair manufacturer.
• कोणतीही स्थापना, देखभाल किंवा समस्यानिवारण करण्यापूर्वी वीजपुरवठा खंडित झाला आहे याची खात्री करा.

3. स्थापना पुस्तिका

Replacing the Okin BetaDrive Linear Actuator Motor is a straightforward process, typically requiring basic tools. It is recommended to have assistance when flipping the recliner chair.

1. Prepare the Chair: Unplug the recliner chair from the power outlet. Carefully flip the chair over to expose the underside mechanism.
2. Identify the Old Motor: Locate the existing linear actuator motor. Note its mounting points and electrical connections.
3. विद्युत कनेक्शन डिस्कनेक्ट करा: Disconnect all electrical cables connected to the old motor. These typically include the main power cable and any control cables.
4. जुनी मोटर काढा: Using appropriate tools (e.g., a wrench for bolts), unfasten the bolts or pins securing the old motor to the chair's frame. Carefully remove the old motor.
5. नवीन मोटर बसवा: Position the new Okin BetaDrive Linear Actuator Motor in the same location as the old one. Secure it using the original bolts or pins. Ensure all connections are tight and the motor is stable.
6. विद्युत कनेक्शन पुन्हा जोडा: Connect the electrical cables to the new motor. Ensure they are securely plugged in and routed to avoid pinching or damage when the chair operates.
7. चाचणी ऑपरेशन: Carefully return the chair to its upright position. Plug the chair back into the power outlet. Test the recliner's functions (up and down) to ensure the new motor operates correctly and smoothly.

प्रतिमा ४: क्लोज-अप view of the Okin BetaDrive Linear Actuator Motor's connector end. This image highlights the electrical connection points for installation.

4. ऑपरेशन

Once installed, the Okin BetaDrive Linear Actuator Motor operates seamlessly with your recliner's existing control system. Simply use the chair's remote or integrated buttons to extend or retract the footrest and recline the backrest. The motor provides the necessary linear motion to achieve your desired position.

• Press and hold the "Recline" or "Extend" button to move the chair into a reclined position.
• Press and hold the "Upright" or "Retract" button to return the chair to its upright position.
• Release the button at any point to stop the motion.

5. देखभाल

Proper maintenance ensures the longevity and smooth operation of your Okin BetaDrive Linear Actuator Motor.

• स्वच्छता: Wipe clean the exterior of the motor and the linear shaft with a dry or slightly damp कापड कठोर रसायने किंवा अपघर्षक क्लीनर वापरणे टाळा.
• तपासणी: Periodically inspect the motor and its connections for any signs of wear, damage, or loose fasteners. Ensure all cables are intact and not frayed.
• स्नेहन: The linear screw mechanism is typically pre-lubricated. Avoid applying additional lubricants unless specifically recommended by the manufacturer, as this could attract dust and debris.
• शक्ती: Ensure the motor is connected to a stable power source within the specified voltage श्रेणी (24V).

6. समस्या निवारण

If you encounter issues with your recliner after installing the Okin BetaDrive motor, consider the following troubleshooting steps:

• मोटर प्रतिसाद देत नाही:
  • Check all power connections. Ensure the chair is plugged into a working outlet and all motor cables are securely connected.
  • Verify the power supply unit (transformer) is functioning correctly.
  • Inspect the hand control for damage or loose connections.
• Motor Operates Slowly or Jerkily:
  • Ensure the chair's mechanism is not obstructed by foreign objects.
  • Check for any binding in the chair's frame or moving parts that might impede the motor's movement.
  • Confirm the chair is not overloaded beyond its weight capacity.
• असामान्य आवाज:
  • Listen for the source of the noise. It could indicate a loose bolt, a worn part in the chair's mechanism, or an issue with the motor itself.
  • If the noise persists and is clearly from the motor, contact customer support.

If troubleshooting steps do not resolve the issue, contact the manufacturer or a qualified technician for assistance.

7. तपशील

8. हमी आणि समर्थन

For warranty information or technical support regarding your Okin BetaDrive Linear Actuator Motor, please contact Okin America directly or the retailer from whom you purchased the product. Ensure you have your model number (1.25.000.073.30 or MTR157) and proof of purchase available when contacting support.

निर्माता: Okin America

For patents and additional information, refer to the manufacturer's official website or documentation provided with your product.